BOGASING G4 Bluetooth Speaker User Manual
- June 1, 2024
- BOGASING
Table of Contents
BOGASING G4 Bluetooth Speaker
Specifications
- Model: G4
- Bluetooth Range : Up to 18m/60ft (Unobstructed)
- Output Power : 50W
- Battery Capacity : 8000 mAh
- Bluetooth Version : 5.3
- Frequency Response : 48Hz-20KHz
- Input Power : 5V 2A
- Charging Time : 3 – 4 hours
- Dimension: 8.86 x 2.52 x 3.39 inches
- Weight: 830g
Product Usage Instructions
Button Configuration
The speaker comes with various buttons for different functions:
- Status indicator light
- Battery indicator light
- Power ON/OFF/Sound effect mode
- Switch modes/Reset
- Play/Pause/Answer/End a call
- Volume down/Previous track
- Volume up/Next track
- USB-C charging port
- TF-card slot
- Aux-in port
LED Indicator
The LED indicator provides information about the status and sound effects:
- Bluetooth light – Red and blue lights blink alternately when ready to connect.
- Sound effects indicator – Different colors for different sound modes.
- Battery Indicator – Alerts for low battery and charging status.
Button Operation
The button operations include functions like turning ON/OFF, switching modes, adjusting volume, and more.
Bluetooth Connection
- Power on the speaker and enable Bluetooth on your device.
- Select the speaker named “BOGASING-G4” from the device list.
- Once connected, you will hear a prompt tone and the indicator light will glow solid.
Wired Connection
You can also connect your device to the speaker via a 3.5mm audio-in cable for a wired connection.
Multiple Play Modes
- The speaker supports up to 128GB TF-card with supported music formats.
- Insert the TF card into the slot for automatic playback.
- Automatic mode switching when AUX or USB-C cable is plugged in.
FAQ
Q: How do I reset the speaker to factory settings
A: Press and hold the specified button until you hear a prompt tone to clear all paired devices or restore to factory settings.
Q: What is the charging time for the speaker
A: The speaker requires 3 - 4 hours for a full charge.
Q: Can I use the speaker while it's charging
A: Yes, you can use the speaker while it's charging via the USB-C port.
Thank you for purchasing the BOGASING-G4 Bluetooth speaker. Please read the User Manual before use and keep it properly for future reference. If you have any questions or comments, please contact us by email: bogasing@hotmail.com
Specifications
Accessories
Button Configuration
USB-C cable
- Status indicator light
- Battery indicator light
- Power ON/OFF/Sound effect mode
- Switch modes/Reset
- Play/Pause/Answer/End a call
- Volume down/Previous track
- Volume up/Next track
- USB-C charging port
- TF-card slot
- Aux-in port
LED Indicator
- Status Indicator
Bluetooth light
- Ready to connect: Red and blue lights blinking alternately;
- Connected: Glows solid.
Sound effects indicator
- 3D: Glows solid blue
- Vocal : Glows solid red
- Super Bass : Glows solid green
( Note : The sound effect indicator has a memory function, and it will default to the last sound effect you used when connecting again.)
Battery Indicator
- When the battery runs low, the speaker make the sound of “beep beep” to prompt the speaker needs to be charged at this time.
- The battery light blinks while charging. When the battery is fully charged, the blinking stops and the battery light glows solid.
Bluetooth Connection
- Power on the speaker and the indicator light blinking alternately between red and blue.
- On your device, enable the Bluetooth feature. Select the speaker which named is “BOGASING-G4” from the device list.
- Once connected, you will hear a prompt tone, and the indicator light will glow solid.
Wired Connection
Connect your device with the speaker via 3.5mm audio in cable. When the aux cable is plugged in, play mode will automatically switch to AUDIO IN mode.
Multiple Play Modes
- This speaker supports up to 128GB TF-card and supports music format: APE/FLAC/WAV/MP3.
- Insert the TF card into the slot and automatically play the audio file in sequence after recognition.
- When AUX or USB-C cable is plugged, play mode will automatically switch to AUDIO IN or USB-C mode. If the bluetooth is connected, press the” ” button to switch the play mode.
TWS Pairing
- Make sure both speakers are powered on and they are disconnected with other devices;
- Press the “ ” button twice quickly on one of the speakers to enter TWS pairing mode;
- After two speakers are paired, you will hear a prompt tone. At this time, the indicator light of the first speaker is blinking, the other one is solid;
- Enable the Bluetooth feature of your cell phone or other devices, find and connect the speaker which is named of “BOGASING-G4”;
- After the two speakers are successfully paired, it will automatically enter the TWS mode when the next time you turn ON, no need to re-pair;
- If the speaker was ever paired with other speakers, Please press and hold the ” ” button to reset it. Restart the speaker after reset, and then refer to steps 1-4 to enter the TWS pairing.
- In TWS mode, only the main speaker can be used for hands-free calling when there is a call, the other speaker has no sound.
Troubleshooting
Warranty Card
Enterprise Life Artificial Intelligence Yousong Industrial Park,
Yousong Community, Longhua District, Shenzhen, China
- Email: bogasing@hotmail.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>