SYMBYX BIOME Neuro Transcranial Helmet Treatment on Upper Neck User Guide
- June 1, 2024
- SYMBYX BIOME
Table of Contents
Neuro Transcranial Helmet Treatment on Upper Neck
SYMBYX Neuro
User Guide
Read this guide thoroughly before use.
In The Box
- SYMBYX Neuro
- Connector cord which links helmet to the battery pack
- Battery
- SYMBYX Neuro User Guide
- Protective storage case
Before Starting Treatment
Position the SYMBYX Neuro on your head with the Velcro straps
in the front. The straps should fit comfortably across your
forehead roughly between the eyes and your hairline. Adjust the
Velcro straps so that the SYMBYX Neuro fits snugly. The circular
disc on the top of the helmet should be placed in a way that it
rests flat on the crown of your head, and the curved sections
on the sides should frame your ears. The back of the helmet
should cover the back of your head and the top of the neck.
Frequency of Use
For the first two weeks of treatment use the SYMBYX Neuro
2-3 days per week on alternating days, for the subsequent
weeks use the SYMBYX Neuro up to 5 days a week. If you are
using the SYMBYX Neuro in combination with a handheld
laser, please follow the separate combined protocol.
Use once per day only, at a broadly similar time. SYMBYX
recommends using the SYMBYX Neuro first thing in the
morning unless you are experiencing interrupted sleep. If so,
in the afternoon or early evening would be preferable.
6. Once the treatment is complete, remove the SYMBYX Neuro
from your head and disconnect it from the battery. The
battery will automatically turn off.
If You Wish To Pause Mid-Treatment
If you wish to stop treatment at any time, simply remove the
SYMBYX Neuro from your head and remove the cord from the
battery pack. The battery will turn off automatically after 30
seconds. To turn the SYMBYX Neuro back on, simply reconnect the
cord to the battery. The treatment will reset and start again from
the beginning.
After Each Treatment Session
Disconnect the battery from SYMBYX Neuro helmet and place it on
a charger after each treatment. This will ensure that it is ready for
your next treatment.
Battery Care & Cleaning
-
In order to charge the battery 3 , first disconnect it from SYMBYX
Neuro 1 . -
Connect the battery to any Micro USB or TYPCE C charging cord
you have at home. -
The battery will take approximately 4 hours to charge completely.
-
To clean the SYMBYX Neuro wipe gently with 70% alcohol or
antiseptic wipes, or a soft dry cloth. Do not use abrasive cleaners.
Do not submerge the helmet in liquid or cover with any material
General Specifications
Battery Output 5V/2.1 A
-
Portable lithium-ion battery
-
Place the helmet in the case and store in a dry, dust-free location
away from direct sunlight. -
The SYMBYX Neuro helmet includes 20 plastic diode lens covers
fitted. Do not tamper with or remove these at any stage. -
Four white lights will illuminate to indicate the battery is fully charge
Either USB input can be used to connect to the SYMBYX Neuro.
LED Specifications
Light Source 20 RED LIGHT LEDs of 635nm (25 mW/cm2)
20 INFRA-RED LIGHT LEDs of 810nm (52mW/cm2)
Pulse Rate 40 Hz
Duty Cycle 20%
Safety Advice
Please review the Safety Precautions and Contraindications page on
our website and the User Guide before use. SYMBYX is not your primary
healthcare provider, and you are advised to consult with one if ever in doubt.
A level of caution should be exercised when commencing any new therapy
as there is always a small risk of producing unwanted side effects. These may
include mild and transient nausea, vomiting, dizziness and/or vertigo. These
symptoms are usually transient, and almost always fully resolve with a short
break from the therapy. Please perform your treatment sitting or lying down
and take your time standing up to minimize any risk of falls or injury. If you
experience any adverse reactions, please cease the therapy immediately and
contact our Clinical Support Team at [email protected] for
further instructions.
FOLLOW THE INSTRUCTIONS IN THE USER GUIDE.
DO NOT DROP OR PHYSICALLY ALTER THE DEVICE OR PROVIDED COMPONENTS. INCL PCB.
DANGER: DEVICE EMITS OPTICAL RADIATION.
DO NOT STARE DIRECTLY AT THE LIGHT SOURCES. LIGHT EMITTED FROM THIS DEVICE MAY CAUSE IRRITATION.
CAUTION: THIS DEVICE OPERATES USING REPEATED EXPOSURE TO NEAR INFRARED RADIATION (NIR).
ONLY USE BATTERY PROVIDED WITH THE DEVICE
THE APPLIANCE MUST ONLY BE SUPPLIED AT SAFETY EXTRA LOW VOLTAGE CORRESPONDING TO THE MARKING OF THE DEVICE
THIS APPLIANCE CAN BE USED BY CHILDREN PERSONS WITH REDUCED
PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION.
Limited One-Year Warranty
Your SYMBYX Neuro is warranted to be free of defects in material and
workmanship under normal personal use. This warranty is limited to a period of
one year from the delivery date. Within this period, repairs or exchange of
parts
that are deemed necessary by SYMBYX will be provided free of charge.
This warranty does not cover the following:
- Misuse, abuse or alteration to the product
- Damage caused by accident or neglect
- Service or repairs made by unauthorized persons
- Do not bend or alter the PCB board as this may compromise the diode lens covers.
We are not responsible for any incidental, special, or consequential damages resulting from the use of this product.
Additional IR and VR warnings:
– advice for the protection of the eyes against exposure to visible and
infrared
radiation and advise that adequate precautions must be taken to safeguard the
user against the dangers of excessive exposure.
– a statement that VIS appliances and IR appliances are not to be used by
• persons suffering from sunburn;
• persons under medical care for diseases that involve photosensitivity;
• persons receiving photosensitising medications;
– a statement that if unexpected side effects, such as itching, occur within
48hr of
the first session of using an appliance, medical advice should be sought prior
to
further exposure;
– information concerning the intended exposure distance (unless this is
controlled by the construction of the appliance);
– recommended schedule of exposure specifying duration and intervals (based
on the emitter characteristics, distances);
– a statement that the appliance must not be used if the timer is faulty or
the filter
is broken or removed;
– identification of alternative components that may influence the radiation,
such
as filters and reflectors;
– identification of replaceable emitters and a statement that they are only to
be
replaced by types marked on the appliance
Contact Information
SYMBYX Customer Care
Email: [email protected]
Phone (worldwide): +61 2 8066 9966
Phone (UK only): +44 2037 698576
SYMBYX Pty Ltd
3/116 Military Road
Neutral Bay NSW 2089
Australia
www.symbyxbiome.com