REEL TECH CSI 7 Chandelier Hoist Instruction Manual
- June 1, 2024
- REEL TECH
Table of Contents
- Key Features
- Safety Precautions
- Overview
- Wiring Diagram:
- Safety Locking Device
- Electrical Contact Plates
- Standard mounting option
- Product Overview
- Dimensions
- Keyswitch operation example
- Key Switch Control
- Optional Product Accessories Examples
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
REEL TECH CSI 7 Chandelier Hoist
Key Features
- Lifting weight of up to 7kg
- Lowering distance 10m
- Safety locking device
- Manual key switch built in Pre wired terminals
Safety Precautions
Please note the following warnings!
Warranty is void with non-compliance!
-
DO NOT operate the lift without the minimum weight or the lift will fail!
-
DO NOT carry the lift by the cables!
-
DO NOT apply any external voltage to the signal control wires!
Overview
Wiring Diagram:
| Brand | REELTECH |
|---|---|
| Product | CSI 7 |
| Rated Specification | Lowering / Raising Specification |
| Type | Compact |
| Model | CSI 7 |
| Option | Standard |
| Operating voltage | 110-277v 50/60hz |
| Wattage | 20w |
| Dimensions | 140x140x216mm |
| Unit Net Weight | 3.0kg |
| Ambient Temperature | -15 to 40 |
| Construction | Lamp Capacity |
| Model | CSI 7 |
| Protection category | IP54 |
| Suspension Wire Dia | 1.2mm |
Safety Locking Device
- The Safety locking device provides additional security when the lift is at rest.
- Special safety locking jaws engage to take the load off the suspension cables.
- The jaws remain locked even in the event of a power failure and only disengage when the lift is operated.
Electrical Contact Plates
- Electrical contact is made by way of spring loaded contacts plates within the main unit and fixed contacts in the lowering coupler of the lift.
- Upon lowering the lift the internal relay isolates the electrical supply, once in the raised position the relay returns power to the lower contacts.
Standard mounting option
*NB Secondary fixing point or tether maybe required, If in doubt please
consult a structural engineer for advise**
Product Overview
Dimensions
Keyswitch operation example
Key Switch Control
Control switch
Do not connect Black+Red+White
Do not connect any voltage
Optional Product Accessories Examples
-
MB A : Bracket to securely mount the lift to the ceiling substrate with two points of fixing.
-
RCP: Recessed cover to conceal the lift behind a suspended ceiling to conceal the lift from view.
-
Key switch: Retractable two way key switch for lower and raising the hoist fits single pattress
Customer Support
REEL TECH UK LTD
Foxlea Lodge
Holcot Road
Brixworth
Northampton
NN6 9BS
United Kingdom
T: 01604 643522
E: enquiries@reeltechuk.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>