REEL TECH CSI 7 Single Wire Hoist Owner’s Manual
- May 15, 2024
- REEL TECH
Table of Contents
Owner’s Manual
TECHNICAL DOCUMENT
CSI 7 – Single Wire Hoist
Key Features :
Lifting weight of up to 7kg
Lowering distance 10m
Remote controlled
Manual key switch built in
Safety locking device
Pre wired terminals
Please note the following warnings!
Warranty is void with non-compliance!
DO NOT
operate the lift without the minimum weight or the lift will fail!
DO NOT
carry the lift by the cables!
DO NOT apply any external voltage to the signal control
wires!
Overview: Wiring Diagram:
| Brand | REELTECH |
|---|---|
| Product | CSI 7 |
| Rated Specifcation | Lowering / Raising Specifcation |
| Type | Compact |
| Model | CSI 7 |
| Option | Standard |
| Operating voltage | 110-277v 50/60hz |
| Wattage | 20w |
| Dimensions | 140x140x216mm |
| Unit Net Weight | 3.0kg |
| Ambient Temperature | -15 to 40 |
| Construction | Lamp Capacity |
| Model | CSI 7 |
| Protection category | IP54 |
| Suspension Wire Dia | 1.2mm |
Safety Locking Device :
The Safety locking device provides additional security when the lift is at
rest.
Special safety locking jaws engage to take the load off the suspension
cables.0
The jaws remain locked even in the event of a power failure and only disengage
when the lift is operated.
Electrical Contact Plates
Electrical contact is made by way of spring loaded contacts plates within the
main unit and fixed contacts in the lowering coupler of the lift.
Upon lowering the lift the internal relay isolates the electrical supply, once
in the raised position the relay returns power to the lower contacts
Standard mounting option :
NB* Secondary fixing point or tether maybe required, If in doubt please
consult a structural engineer for advise 
Product Overview :
Dimensions :
Remote control : or RCU can control up to 999 lift addresses
Each lift has its own integrated radio receiver with a unique serial address.
The RCU operates in the license-free ISM band of 433.92 MHz The range is circa
100 metres.
Lifts can be controlled individually, in pairs or in multiple groups.
- “ON” button for Lighting
- erase the value
- “OFF button for Lighting
- To ascend lifter
- To descend lifter
- Control button for descending length
- Set mode is secured by password please contact local retailer or agency
- Group button for group functions
- Select switch button for unit code and serial number code.
- To check serial number with unit code.
- Mode button is used in conjunction with the following buttons
- Power button for Remote control
Auto
Stop Feature :
When lowering, the lift stops automatically if the decent is interrupted or
when it reaches the ground.
Adjustable Lowering Height : Each lift can be set to stop at the users
desired lowering height.
This can be stored in the lift for future operations
Keyswitch operation example :
Keyswitch Control :
Control switch
Do not connect Black+Red+White
Do not connect any voltage.
Optional Product Accessories Examples :
MB A :
Bracket to securely mount the lift to the ceiling substrate with two points of
fixing. 
RCP : Recessed cover to conceal the lift behind a suspended
ceiling to conceal the lift from view. 
RCU : Remote control handset, can control
upto 1000 units. Group and Pair multiple Lifts
REEL TECH UK
LTD
Foxlea
Lodge
Holcot
Road
Brixworth
Northampton
NN6 9BS
United Kingdom
T: 01604 643522
E: enquiries@reeltechuk.com
www.reeltechuk.com
REEL
TECH UK LTD
www.reeltechuk.com
01604 642522
enquiries@reeltechuk.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>