TORQ ENGINEERING LLC RAV-CARGO Toyota Rav4 Cargo Basket Instruction Manual

TORQ ENGINEERING LLC RAV-CARGO Toyota Rav4 Cargo Basket

Product Information

• Specifications:
  • Part Number: RAV-CARGO
  • Manufacturer: Torq Engineering
  • Compatibility: 2019+ Toyota RAV4
  • Includes: Mounting Brackets (LH/RH), Cargo Rack

Product Usage Instructions

• Installation:
  • Read all instructions carefully before starting the installation.
  • Test fit and align the cargo rack into the vehicle. Make adjustments as necessary.
  • Centre punch or mark the mounting holes with a marker (4 holes).
  • Install the mounting brackets (LH/RH) securely using appropriate tools.
  • Attach the cargo rack to the mounting brackets ensuring a tight fit.
• Safety Precautions:
  • Always wear your seatbelt and shoulder harness when operating the vehicle.
  • Operate the vehicle safely and conservatively, especially in off-road conditions.
  • Remain on designated trails and observe conservation techniques while using the cargo rack.

FAQs

• Q: Can this cargo rack be used on other vehicle models?
  • A: The cargo rack is specifically designed for the 2019+ Toyota RAV4 and may not be compatible with other models.
• Q: Is professional installation recommended?
  • A: While installation can be done following the provided instructions, professional installation is recommended for optimal results.

Product Instructions

Notice to Dealer / Consumer

Important! Read all instructions before attempting any work on the vehicle.

• Disclaimer Notice: Installing this suspension system on any vehicle implies that you are in agreement with the following terms and conditions concerning that vehicle, the vehicle owner, and any or all occupants of said vehicle at any time:
• Torq Engineering is not responsible, and cannot be held responsible for any conditions of the said vehicle including, but not limited to the following:

1. any adverse behaviour, premature failure, or breakage caused by oversized tyres and wheels, improper installation, failure to follow instructions, or any general negligence caused by the installer or owner of said vehicle.
2. Any breakage or premature failure caused by racing or driver negligence.
3. Any incident determined to be caused by an increased height in said vehicle’s centre of gravity.
4. Any incident determined to be caused by improper installation.
5. Any incident determined to be caused by a failure of materials.

• Torq Engineering is to be held harmless by the installer of this suspension component, the owner of said vehicle, and any parties related directly or indirectly to said vehicle or the owner of said vehicle. Torq Engineering is to be held harmless by all parties mentioned during all circumstances or incidents resulting from the installation of this suspension component.
• It is not the intention of Torq Engineering that said vehicle be modified for use on public highways sanctioned by the Department of Transportation, or any state or local governing body. The vehicle owner accepts sole responsibility for ensuring that said vehicle is not in violation of local, state, or federal laws or vehicle codes. Please check local vehicle laws and regulations before modifying your vehicle.
• By installing this kit or having this kit installed on your vehicle, you are implying that you agree to the above terms and conditions. Please do not install this system if you do not agree.

WARNING: Vehicles modified for Off-road use may handle differently and vehicles may roll over.

• Vehicles modified for off-road are generally not designed to improve cornering or maneuverability on the highway, therefore it is imperative to familiarize yourself and all operators of the vehicle with the special driving characteristics of the vehicle.
• Failure to operate a vehicle safely and conservatively may cause you, your passengers and third parties to suffer serious injury or even death if control is lost and the vehicle overturns.
• Always wear your seatbelt and shoulder harness. Seatbelts not only help to protect occupants from injury but also keep the driver behind the wheel and in control when operating in rough terrain.
• Always remain on trails and observe conservation techniques while operating your vehicle.

2019+ TOYOTA RAV4 REAR CARGO RACK Bill of Materials

• 2 MOUNTING BRACKETS ( LH / RH )
• 1 CARGO RACK
• 4 ¼-20 Rubber Well Nuts
• 6 ¼-20 X ½ STAINLESS BUTTON HEAD CAP SCREWS.
• 4 ¼-20 X 1-1/8 STAINLESS BUTTON HEAD CAP SCREWS.

INSTALLATION

INSTALLATION NOTES:

• Inspect the contents of the kit and read the entire instructions before proceeding.
• We recommend this installation be performed by a qualified technician
• Torque all hardware to factory specifications
• We recommend using red Loctite on all bolts

1. Assemble the Cargo Rack. Bolt-on the side mounting brackets using the ¼-20 x ½” Button Head screws. The cargo rack sits on top of the mounting brackets.
2. Test fit and align the cargo rack into the vehicle, Adjust as necessary.
3. Centre punch or mark the mounting holes with a marker (4 holes)
4. Remove the Cargo rack. Drill a small pilot hole first then use a ½” drill bit.
5. Install the ¼” Rubber Well Nuts.
6. Reinstall the Cargo Rack and use the ¼-20 x 1-1/8” Button Head Screw to attach the cargo rack.

Part # RAV-CARGO
www.torq-engineering.com.

References

• Toyota Lift Kits - Torq Engineering – TORQ ENGINEERING LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>