TSL 7KW 32A Car Charger US Standard Power Supply User Manual
- June 1, 2024
- TSL
Table of Contents
TSL 7KW 32A Car Charger US Standard Power Supply
Product Information
- The TSL 7KW 32A Car Charger is a high-power charging solution designed for electric vehicles.
- It is compatible with US standard power supplies and provides efficient charging for your vehicle.
Specifications
- Charging Power: 7KW (32A, 120-240V)
- Charging Speed: Variable based on power supply wattage, battery capacity, and electric charge quantity
- Compatibility: US Standard Power Supply
Product Usage Instructions
- Insert the power plug into the power outlet.
- Insert the TSL charging head into the charging port of your electric vehicle.
- Wait for the charging indicator to turn green, indicating that the charging process is active.
FAQs
- Q: What is the maximum charging power of the TSL Car Charger?
- A: The maximum charging power is 7KW (32A, 120-240V). The actual charging speed depends on various factors such as the wattage of the power supply, battery capacity, and electric charge quantity.
- Q: Is the TSL Car Charger compliant with FCC regulations?
- A: Yes, this device complies with part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received.
- Note: Any changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment.
Packaging Accessories
Warning:
- Please read the instructions before use, if not used per the instructions may cause fire, electric shock, or serious injury.
- It is strictly prohibited to disassemble or tamper with this charger, and strictly prohibited to repair this charger from non-professionals workers.
- Avoid using the charger under extreme conditions (hurricanes, rainstorms, etc.).
Key Description
- Please press 2 seconds the button to enter adjustment mode, with [CUR] and [APPT] optional, respectively for adjusting the charging current and setting the charging appointment time.
- Shortly press the button to switch options, Press 2 seconds the button to enter the corresponding setting option.
- Adjusting charging current: After entering the current setting model, there are tour options: 8A, 16A, 24A, and 32A. Short press the button to switch options, cycling through the four levels. After selecting the corresponding level, press 2 seconds the button to confirm and exit the setting mode.
- Setting charging appointment: After entering the charging time setting mode, short-press the button to adjust the scheduled charging time.
- Each press increases the time by one hour. The range is adjustable from 0 to 12 hours, with 13 levels to cycle through. After selecting the desired time, press seconds the button to confirm and exit the setting mode.
- The countdown begins and charging starts at the set time.
- Factory default data is 32A and immediate charging (the current level is 32A and no scheduled time).
- Current Adjustable:
Method of use
- Insert the power plug into the power outlet.
- Insert the TSL charging head into the charging port.
- Wait for the charging indicator to turn green.
FAQ:
- Q: Is this charger waterproof?
- A: The charging gun can reach IP54 in working condition, while the protection level of the control box can reach IP66 in unworking condition, it is not suggested using the charger in extreme environments and avoid the control box from rain.
- Q: How fast is the charge speed?
- A: The maximum charging power is 7KW (32A, 120-240V), and the actual charging speed depends on a variety of factors: the watt of the power supply, the capacity of the battery and the quantity of electric charge.
Product Specification
Electrical properties
- Input voltage 120-240V
- Rated current 32A
- Insulation resistance ≥ 1000M
- Mechanical performance
- Durability Above 10000 times, (unworking status)
Environmental performance
-
Environmental temperature -65°C ~ + 125°C ( PE cable-40°C ~ +85°C)
Vibration MIL-STD-202 Meth.204 -
Corrosion resistance MIL-STD-202 Meth. 101
Material
-
cover Thermoplastic
-
Insulator Thermoplastic
-
seal ring Rubber
Flame retardant rating UL94- VO -
Touchpoint Copper Alloy silver-plated
Eco-friendly performance
- Operating temperature – 10°C~+80°C
- Relative humidity 40°C 98%
- Protection level IP54 (working) IP66(unworking)
- Cable length 5m
- Weight 2.8kg
Package Transportation
- Transportation Express/Logistic
- Package Storage case / PE+ Carton box
FCC
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in porlable exposure conditions without restriction.