Shanghai Loostone Information Technology Co Ltd K3AMZ3 Q1 Pro Wireless Microphone User Manual

Shanghai Loostone Information Technology Co Ltd K3AMZ3 Q1 Pro Wireless

Microphone

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Interference Conditions: Must not cause harmful interference and must accept any received interference
• Antenna: Ensure proper separation and connection

Product Usage Instructions

FCC Compliance:
Ensure that any changes or modifications to the equipment are approved by the responsible party to maintain compliance with FCC regulations.

Antenna Setup:
Properly position the antenna to avoid interference. Increase the separation between the equipment and receiver to prevent signal issues.

Power Connection:
Connect the equipment to an outlet on a different circuit than the receiver to prevent electrical interference.

Technical Assistance:
If you experience any difficulties or need help with the setup, consult the dealer or a qualified radio/TV technician for assistance.

FAQ (Frequently Asked Questions)

• What should I do if my device is causing interference?
  Ensure proper antenna positioning and separation from the receiver. If issues persist, consult a professional for assistance.

• Can I make modifications to the equipment on my own?
  No, any changes should be approved by the responsible party to maintain FCC compliance.

What’s Inside

Receiver Hub

1. Indicator Light
   • Solid White Normal working mode
   • Quick Flashing White Pairing mode
2. Volume Adjust the volume of Music
3. Reverb Adjust Microphone Reverb
4. Echo Adjust Microphone Echo

Remote control

Microphona effects

1. Standard
2. Cave
3. Rock
4. TAO
5. R&B
6. KTV
7. Studio
8. Concert
9. Llve

Microphone

Microphone light Details

• Solld Yellow Microphone functioning normally
• Quick Flashing Yellow Microphone in pairing mode
• Salid Red Low power (<10%]
• Quick Flashing Grean Microphone is charging
• Solid Green Microphone Is fully charged

How to Install

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement for receiver hub:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This station should be installed and operated with minimum distance 20cm between the radiator& your body.RF warning for microphone: The device has been evaluated to meet general RF exposure requirment.
The wireless microphone can be used in portable exposure condition without restriction.

RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirment. The device can be used in portable exposure condition without restriction.

Note : This equipment has been testedand found to comply with the limits fora Class B digital device, pursuant topart 15 of the FCC Rules. These limitsare designed to provide reasonableprotection against harmful interferencein a residential installation. This equipmentgenerates,uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

warranty & Exchange

Exchange
Within 14 days starting from the date of purchased, users can replace the product of same model in the event that the fault occurs during normal use is caused by non-human factors and has been identified through inspection.

Warranty
You are eligible to claim warranty witllin 12 months starting from the date of purchased.

Non-warranty regulations

1. The unauthorized maintenance, misuse, bumping, negligence, abuse, liquid inlet, modification, improper use of products and accessories.
2. 0ut of warranty period.
3. Damage caused by human factors.
   Notice
   Please keep the product away from high temperature and damp places so as to avoid any breakdown.

FAQ

• Microphone indicator light is not on
  Please charge the microphone, it maybe out of battery.

• There is no sound from the Microphone

1. Check if the microphone is turned on and its LED indicator is solid yellow;
2. Make sure that the mixer receiver has been correctly inserted into the interface ofTV;
3. If the mixer indicator light is not on, please refer to our pairing guide by scanning the qr code on the cover of the manual;

• There Is no sound from Speaker
  • Make sure the audio cable Is connected prope~y to your speaker
  • Please make sure you select the correct audio input on your speaker;

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>