NIUBILITY KQiAir Series Lightest Electric Scooter Instruction Manual
- June 1, 2024
- NIUBILITY
Table of Contents
NIUBILITY KQiAir Series Lightest Electric Scooter
Specifications
- Manufacturer: Jiangsu Niu Electric Technology Co., Ltd.
- Importer: Niubility Tech Srl
- Address : Corso San Gottardo 9, 20136 Milano, Italy
- Model : KQi Air / KQi Air X
- Version: 1.0
Product Usage Instructions
Parts Info
The scooter consists of various parts including throttle, turn signal, headlight, front reflector, folding lever, disk brake, dashboard, brake lever, ambient light, charging port, folding buckle, side reflector, rear hub motor, battery compartment, kickstand, and horn.
Handlebar Functions
The handlebar features a power button, turn signal buttons (left and right), throttle, and horn buttons. Each button serves a specific function for controlling the scooter.
Power Button
Name: Power Button
Function: Power on, power off, activate NFC, mode switch, headlight control, Bluetooth activation, speed unit switch, pedestrian mode switch, turn signal control, hazard light control, horn activation.
Operation Method: Refer to the manual for detailed instructions on using each function of the power button.
Dashboard Info
The dashboard provides essential information about the scooter’s status and settings. It includes indicators for turn signals, warning messages, speed modes (Dynamic Mode, Cruise Mode, Sport Mode, E-Save Mode), speedometer, Bluetooth connectivity status, battery level indicator, and dashboard light that changes based on the scooter’s status.
FAQ
- How can I find the serial number of my KickScooter?
- You can find your KickScooter serial number on the side of your KickScooter or in the Niu E-scooter App under the [manage]section.
- How do I activate the hazard lights on the scooter?
- To activate the hazard lights, press the left or right turn signal button twice.
Parts Info
Handlebar Functions
Dashboard Info
- Turn Signal Indicator
- Cruise Mode
- Headlight
- Warning Indicates that the scooter has detected an error. The error code will display on the dashboard. See the troubleshooting page for possible causes and solutions.
- Sport Mode Speed limit : 25 km/h (15.5mph) Switching method: Short press the Power Button once to switch modes.
- E-Save Mode Speed limit : 15 km/h (9.3mph) Switching method: Short press the Power Button once to switch modes
- Dynamic Mode: Speed limit: 25 km/h (15.5mph) Switching method: Activate feature in the app to set speed range and acceleration. Press the power button to switch modes.
- Speedometer: Displays the current speed of the scooter.
- Bluetooth: Indicates that the scooter is connected to the app.
- Pedestrian Mode Speed limit : 6 km/h Switching method: Short press the Power Button five times to switch to pedestrian mode
- Battery Indicator: Displays the remaining battery power in the battery bar
- Dashboard Light: Color changes based on the scooter’s status.
Ambient Light Functions
Riding lights
When riding the scooter, the ambient light length changes with the adjustment of the throttle. It can also be switched to different modes in the NIU app.
Charging tips
While charging, you can view the battery level on the indicator.
Scooter status
The scooter status will be shown in the light, such as when the turn signals are being turned on.
Specifications
- Average battery life : It is tested when the driver weighting 75 kg (165 lbs) drives at a constant speed of 15 km/h (9.3 mph) on a flat road in an ambient temperature of 25℃ (77℉) in case of a full battery. (Factors affecting battery life include speed, number of startups and shutdowns, kinetic energy recovery setting, driver weight, and ambient temperature.)
- Maximum Slope： The maximum gradient that driver weighing 75 kg (165 lbs) gets through at a constant speed of 8 km/h (5 mph) in the ambient temperature of 25℃ (77℉) in case of a full battery
Troubleshooting
Certifications
For model : KQi Air / KQi Air X
Bluetooth Operating Frequency:2400-2483.5MHz; Max Radio Power: 2dBm
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AZ6G-KAYC3121
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)
IC:27459-KAYC3121
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE: Unauthorized modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
- Manufacturer: Jiangsu Niu Electric Technology Co., Ltd.
- Importer: Niubility Tech Srl
- Address: Corso San Gottardo 9, 20136 Milano,Italy
- Manufacturer: Jiangsu Niu Electric Technology Co., Ltd.
- Importer: Sinnis International Trading Ltd
- Address: Unit 1, Ocean View Business Park, Gardner Road, Portslade, BN41 1PL
Contact
Keep your KickScooter serial number on hand when contacting us.
You can find your serial number on the side of your KickScooter or on the page [manage] in the Niu E-scooter App