GLOBO LIGHTING 54308-3 IM Ceiling Light black Instruction Manual
- May 14, 2024
- GLOBO LIGHTING
Table of Contents
GLOBO LIGHTING 54308-3 IM Ceiling Light black
Product Information
| Model Number | 54308-3 |
|---|---|
| Maximum Wattage | 3x MAX 40W |
| Bulb Type | E14 |
| Voltage/Frequency | 230V~ 50Hz |
| Manufacturer | GLOBO Handels GmbH |
| Address | Gewerbestrasse 3, A-9184 Sankt Peter, AUSTRIA |
| Website | www.globo-lighting.com |
Installation Diagram
The installation diagram shows an exploded view of the light fixture,
including the following components:
- Mounting bracket
- Light bar with three sockets
- Electrical connections with L, N, and ground symbols
- Screws for mounting
- Individual light socket casings
- Spring-like components for securing the light bulbs
- Light bulbs
There are also two inset diagrams
- An illustration of a circuit breaker in the off position, indicating the power should be disconnected during installation.
- Construction to twist wires together, depicting a broken wire being twisted onto a solid wire.
- Illustration of a circuit breaker in the on position, indicating that power can be turned on after installation is complete.
Specifications
| Model Number | 54308-3 |
|---|---|
| Maximum Wattage per Bulb | 40W |
| Total Maximum Wattage | 120W |
| Number of Bulbs | 3 |
| Bulb Type | E14 |
| Voltage | 230V~ |
| Frequency | 50Hz |
| Manufacturer | GLOBO Handels GmbH |
| Manufacturer Address | Gewerbestrasse 3, A-9184 Sankt Peter, AUSTRIA |
| Manufacturer Website | www.globo-lighting.com |
POWER
ON
OFF
INSTALLATION
- 3x MAX 40W
- E14 230V~ 50Hz
FAQ
- What type of bulbs does the GLOBO LIGHTING 54308-3 fixture use?
- The fixture uses E14 bulbs with a maximum wattage of 40W per bulb.
- How many bulbs are required for the fixture?
- The fixture requires 3 bulbs.
- What is the total maximum wattage for the fixture?
- The total maximum wattage for the fixture is 120W.
- What should be done before starting the installation process?
- Ensure that the power is turned off at the circuit breaker (as shown in inset A) to prevent electrical shock.
- Are there any specific wiring instructions for installation?
- Yes, wires should be twisted together as shown in inset B.
- When can the power be turned back on after installation?
- Once the installation is complete, the power can be turned on at the circuit breaker (as shown in inset C).
- Where can I find additional information or support?
- Additional information and support can be found on the manufacturer’s website at www.globo-lighting.com.
GLOBO Handels GmbH
Gewerbestrasse 3
A-9184 Sankt Peter AUSTRIA
www.globo-lighting.com
Read User Manual Online (PDF format)
Loading......