RIGA V2 An ultra-compact coaxial speaker Instruction Manual

: June 1, 2024
: Riga

Table of Contents

Please Read Our Introduction
How to instal Components
ACCESSORY LIST
GENERAL VIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RIGA V2 An ultra-compact coaxial speaker RIGA V2

Please Read Our Introduction

Valued Customer,
We design and carefully manufacture our products for our customers, We wish that our customers to have fun while they are doing their new furniture
The product you just purchased was subjected to all sorts of tests and controls before sending out to you.
Hope you enjoy your new furniture!!!
Although all products are carefully manufactured and packed, sometimes we experience damage during transportation.

Insuch cases, please check the damaged part, note the part number written on the part and do not hesitate to contact us
Mail : info@kybeledecor.com
Furniture parts are going to several manufacturing procedures. During this process, parts can have little dust or marks. Please clean the parts with dump cloth before assembly to get the best result. Usual cleaning would be suffice.
Before starting, please check all components and accessories according to the provided list.
If you purchased more than one product, to prevent confusion, be sure that you completed the first product, the start the next one.
Please make sure that you select correct numbered part and use specific connector to assemble.
We do not recommend any modification or rotation in assembly.
Please follow the manual carefully.
Do not use your furniture for out of purposes.
If you would like to use it out of purpose or would like to do some modification or rotation, please contact us for more details.
Please do not expose your furniture with excessive heat, cold and humidity because product can be affected negatively.

How to instal Components

| MINIFIX HEAD
---|---
| MINIFIX SCREW
| DOWEL

If the dowel is not required during the installation phase, it is not included in the package.

*Please notice that there is an small arrow on A03 (minifix head).This arrow should show the direction of upper hole.

*After attaching two pieces please turn the A03″ (minifix head) clockwise direction with the help of a screwdriver.

*Please do not over screw the minifix head since it may be broken if too much power is imposed. Just make sure that it is screwed to the direction “+” do not go any further.