Bestway 58517 Swim Fitness System Owner’s Manual

Bestway 58517 Swim Fitness System

Product Information

Specifications:

• Suitable for in-ground pools or above-ground metal frame pools
• Pool size: length 4.57 m (15′), width 2.44 m (8′), depth 1 m (39.5′)
• Speed range: 0.65 – 1.30 m/s or 0.71 – 1.42 yd/s
• Frequency band: 433.92 MHz
• Maximum radio-frequency power: 8 dBm

Product Usage Instructions

Display Panel Functions:

• A: Digital display window
• B: Calorie counter mode
• C: Timer mode
• D: Distance mode
• E: Stop button
• F: Speed and parameters adjustment buttons
• G: Start/pause button

Instructions:

• To use the calorie counter mode, press the corresponding button to display calorie information.
• In timer mode, set the desired time using the +/- buttons and start the operation with the start button.
• To measure distance, select the distance mode, set the desired distance, and start the operation.
• Adjust speed and parameters using the +/- buttons during operation or mode setting.
• To start or pause the system, use the start/pause button.

FAQ:

• Q: Where can I find spare parts for the Swim Fitness System?
  A: Spare parts can be found on www.bestwaycorp.com/support or by contacting customer support.

• Q: What is the maximum operating time for the system?
  A: The system will stop automatically after a maximum of 90 minutes of operation.

• Q: How do I clear current data on the display panel?
  A: Press the stop button to clear the current data and enter standby mode.

• Q: Can the Swim Fitness System be used in all types of pools?
  A: The system is suitable for in-ground pools and above-ground metal frame pools within specific size dimensions.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

• The appliance must be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30mA.
• Ensure the transformer is at least 2 meters away from the pool. Keep your distance as far as possible.
• The plug of the transformer must be at least 3.5m away from the pool.
• The appliance is only to be used with the provided transformer.
• Do not sit, straddle, step on or exert pressure on the product as injury could occur.
• DO NOT BURY CORD. Locate the cord to minimize abuse from lawnmowers, hedge trimmers, or any other equipment.
• To reduce the risk of electric shock, replace the damaged cord immediately.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
• Extension cords can’t be used.
• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustments to the product.
• Don’t plug or unplug the appliance if your hand is wet.
• Read the instructions before using the appliance, installing it, or reassembling it.
• If instructions are misplaced, please contact Bestway or search it on the website: www.bestwaycorp.com.
• Hereby, Bestway declares that the radio equipment type 58517 complies with Directive 2014/53/EU.
• The full text of the EU Declaration of Conformity is available at the following internet address: www.bestwaycorp.com
• Hereby, Bestway declares that the radio equipment type 58517 complies with Radio Equipment Regulations 2017.
• The full text of the UKCA declaration of conformity is available at the following internet address: www.bestwaycorp.com.
• Disconnect the pump from the supply mains before carrying out user maintenance such as cleaning the filter.
• This appliance shall not be used by children.
• Cleaning and user maintenance shall not be carried out by children.
• Always disconnect the appliance from the supply before assembling, disassembling or cleaning.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance safely and if they understand the hazards involved.
• Children shall not play with the appliance.
• Pumps without indication that they are protected against the effect of freezing shall not be left outside during freezing weather conditions.
• This product is not intended for commercial use.
• The battery is non-replaceable.
• Non-rechargeable batteries are not to be recharged.
• Exhausted batteries are to be removed from this product. Do not dispose of the product and its batteries in a fire. Check your local regulations for proper disposal instructions.

Suitable for in-ground pools or above-ground metal frame pools (Pool size: length≥4.57 m(15’), width≥2.44 m(8’), depth≥1 m(39.5”))

• Suggested water temperature range: 15-35°C
• Speed range (Approximate):

• Frequency band: 433.92 MHz
• Maximum radio-frequency power: 8 dBm

Parts

3

| P04754(EU)/ P04875(GB)/ P04874(CH)|

Transformer

|

1

4| P04755| Mounting bracket| 1
5| P04756| Screws| 2
6| P04757| Set screw| 1

Display Panel Function

• A. Digital display window Display current mode parameters
• B. Calorie counter mode

1. Press this button in free running mode, the digital screen displays the calorie interface
2. Press and hold this button in any state to enter the calorie consumption mode setting interface, and the calorie consumption mode button indicator will flash. Press the “+/-” button to set the parameter increase or decrease (range 10-1000 cal). After the setting is completed, press the start button to start the operation.

• C. Timer mode

1. Press this button in free running mode, the digital screen displays the time interface
2. Press and hold this button in any state to enter the timing mode setting interface, and the timing mode button indicator will flash. Press the “+/-” button to set the parameter increase or decrease (range 5-90 minutes). After the setting is completed, press the start button to start the operation.

• D. Distance mode

1. Press this button in free running mode, the digital screen displays the distance interface
2. Press and hold this button in any state to enter the distance mode setting interface, and the m/yd indicator will flash. Press the “+/-” button to set the parameter increase or decrease (range 10-5000 m/10-5500 yards). After the setting is completed, press the start button to start the operation. (Pressing this button without holding it down will switch between m/yd units)

• E. Stop button

1. In all cases except the standby state, press the stop button to clear the current data and the machine will enter the standby state.
2. When the fault code is reported, press this button to cancel the fault and the machine enters the standby state.

• F. Speed and parameters adjustment buttons
  During operation, you can accelerate or decelerate by pressing the “+/-” key; in the mode setting, you can set the parameter to increase or decrease by pressing the “+/-” key.

• G. Start/pause button

1. Press this button in the standby mode to enter the free mode, and press this button to pause during operation. The machine will stop automatically after a maximum of 90 minutes of operation.
2. After the calorie consumption, timing or distance mode setting is completed, press this button to start running. Press this button to pause during operation.

• H. LED light switch button Press to turn on/off the LED light
• I. Distance unit indicator m/yd indicator
• J. Speed Setting Display
  One speed bar represents one speed setting, which is represented from left to right with green representing slower speeds and red representing faster speeds. The default speed when the machine is activated is set at 4-speed bars.

Remote Control

• A. Indicator light
  Flashes a red colour when a button is pressed

• B. Speed Adjustment Buttons
  Press to increase or decrease the speed setting

• C. Emergency stop button
  In an emergency, press the emergency stop switch to completely cut off the power to the device.

• D. Start/pause button
  Press to start or pause

If the remote control or the body of the Swimfinity is replaced, they must be paired again using the following instructions:

1. Ensure the body of the Swimfinity is in standby mode.
2. The remote control must be within 3 m (10 ft.) from the control panel.
3. On the remote control, press the speed adjustment buttons and emergency stop button at the same time.
   Hold it until you hear the buzzer sound. This means the pairing was successful.

Important:
After the pairing operation is finished, the alarm will appear on the control panel. This is normal. Press the stop button on the control panel to reset the alarm, and you may use your Swimfinity.

MAINTENANCE

Please disassemble and store the product indoors when the device will not be used for a long period.

1. Turn off the transformer and unplug the power cable from the electrical outlet.
2. Disconnect the machine power cable from the transformer.
3. Remove the machine from the pool, and air-dry thoroughly.
4. Store the machine and transformer in a dry place. The storage temperature should be between 4°C and 40°C.

TROUBLESHOOTING GUIDE

your local Bestway Service Center for instructions.
Too noisy / Jet water is weak| – The machine unit is not fully immersed in the water.

– The machine is not parallel to the water surface.

– The motor doesn’t work properly.

| –  Make sure the device is under the water.

–   Check if the support plate is in place. Refer to the “Installation” for details.

For assistance, please visit the support section on our website, www.bestwaycorp.com.

No LED display| – The transformer is unplugged or off.

– The transformer is not connected to the machine.

– Display panel cord or display panel failure.

| –  Ensure the transformer is plugged in and switched on.

–  Connect the transformer with the machine. For assistance, please visit the support section on our website, www.bestwaycorp.com.

Disposal

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Transformer assembly

1. The transformer must be installed on a solid-level area.
2. The transformer requires free circulation of air for cooling.
3. The transformer must be installed in a location protected from moisture, rain and splashing water.

Connecting the swimming machine unit to the transformer

1. Be sure the transformer switch is OFF, and connect the transformer cable to a grounded electrical outlet.
2. The transformer shall be placed at least 2m away from the pool. Connect the machine power cable plug to the transformer power receptacle. Be sure the plug cover is securely tightened.
3. Test the PRCD before use:
4. Press the “RESET” button. The indicator on the PRCD should be ON.
5. Press the “TEST” button. The indicator on the PRCD should be OFF.
6. Press the “RESET” button again to start using the product.
7. Do not use the product if the test fails. Contact a qualified electrician to inspect the electrical outlet socket.
8. Turn the transformer switch ON.

Installation

The pool must be filled with water before installation. Two adults are required for both above and in-ground pools.

For above-ground metal frame pool:

1. Pull the fastening nut out, and remove the mounting bracket.
2. Lift the machine to the pool frame.
3. Pull back the support plate, place it against the wall of the pool, and adjust it so the plate is placed securely against the pool wall.
4. Grab the height adjustment handles on both sides of the machine to raise or lower the motor underwater.
5. Adjust the machine slightly to make it horizontal against the water line.
6. Tighten the locking screw.

For in-ground pool:

1. Install the in-ground pool mounting bracket.
   • Make sure the top surface of the pool edge is stable, flat and level.
   • Drill two holes on the pool edge – in the centre of the shorter side – where the mounting bracket will be installed. Pay attention to the electrical, gas and water lines when drilling the holes.
2. Place the machine on the mounting unit.
3. Pull back the support plate, place it against the wall of the pool, and adjust it so the plate is placed securely against the pool wall.
4. Grab the height adjustment handles on both sides of the machine to raise or lower the motor underwater.
5. Use the set screw for enhanced stability.

©2023 Bestway Inflatables & Material Corp.

All rights reserved.

Trademarks used in some countries under license from

Bestway Inflatables & Material Corp., Shanghai, China
Manufactured, distributed and represented in the European Union by.

Bestway Europe S.p.a., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy
Distributed in Latin America by

Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile

• Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia
• Tel:
  • Australia: +61 2 9037 1388
  • New Zealand: 0800 142 101

Distributed in the United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL
Exported by

Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong www.bestwaycorp.com. bestwaycorp.com/support.

References

• Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>