EKSATelecom H1 Pro Telecom Bluetooth Trucker Headset User Manual
- June 1, 2024
- EKSAtelecom
Table of Contents
EKSATelecom H1 Pro Telecom Bluetooth Trucker Headset User Manual
Package Contents
-
KSAtelecom H1 Pro Wireless Headset
-
Type-C Charging Cable
-
Carry Pouch
-
User Manual
-
Replacement Ear Pad
Specifications
Bluetooth Version: 5.0
Effective Wireless Range: 30 m/99 ft (Max 50 m/164 ft without obstacles)
Music Time : ≈57 hours (70% volume)
Talk Time : 30 hours (70% volume)
Charging Time : ≈1.5 hours
Speaker Diameter: 40 mm
Impedance: 32 Ω ± 15%
Sensitivity: 114 ± 3 dB
Frequency Response: 20 Hz-20 kHz
Size: 2.7 mm 1.85 mm
Sensitivity: -25 ± 1 dB
Frequency Response: 100 Hz – 10 kHz
Impedance: 2.2 ΚΩ
Polar Pattern: Unidirectional
Mic: EKSAtelecom Voice Pure Technology
Product Overview
- Call Indicator
- EKS Telecom Voice Pure Technology
- Type-C Charging Port
- Volume +
- Bluetooth Indicator
- Multi-Function Button (MFB)
- Volume
- Mic Mute Button
- Charging Indicator
Operation Guide
Multi-Function Button:
Press for 3 seconds: Headphone on/off
Click: Play/Pause
Triple Click: Voice Assistant/Sir
Volume Button:
Click: Volume +/-
Press for 2 seconds to next/previous track
Mic Mute Button:
Click: Microphone on/off
Call Functions
Call Handling:
Redial
Audio Switching:
Three-Way Calling:
**Click
**
Double Click
Three-way calling mode
**Press for 2 seconds
**
**Tom
Answer a new call and hang up your current call
**
**Tom
** Answer a new call
Amy
Keep your current call
During a three-way call
**Amy
** Keep your current call and reject a new call
Switch between two calls
Bluetooth Pairing
-
Turn on EKSAtelecom H1 Pro, until its Bluetooth indicator flashes alternately between red and blue, indicating that the headset is in pairing mode.
-
Turn on the Bluetooth of your device, activate the search feature, and select “EKSA-H1 Pro”. After pairing, the Bluetooth indicator flashes slowly in blue light with a voice prompt “your headset is connected”, confirming a successful connection.
Note: -
Keep the distance between the EKSAtelecom H1 Pro and your device within 1 meter,
-
If necessary, the pin code to complete pairing is “0000”.
-
While in pairing state, if a connection cannot be established within 10 minutes,
the headset will turn off automatically. -
When the headset is turned on again, it will connect to the last connected device automatically.
-
Compatibility issues may arise when connecting directly to a computer via Bluetooth. Preferably with an adapter (not included).
-
To connect to a new device, turn off the Bluetooth of the currently paired device and follow the above steps to connect successfully to a new device.
**device A
device B
**
Dual Pairing
-
After successfully connecting the Telecommute H1 Pro to device A, turn off the Bluetooth of device A. The headset’s Bluetooth indicator flashes in red and blue alternately to signify pairing mode.
device A
-
Turn on the Bluetooth of device B, activate search mode, and connect to “EKSA-H1 Pro”.
device B
-
Turn on the Bluetooth of device A to connect with “EKSA-H1 Pro”. This puts both devices A and B in a simultaneous connection with “EKSA-H1 Pro”.
device A
Reset
The Bluetooth indicator flashes alternately in red and blue.
When EKSAtelecom H1 Pro is in connected/pairing mode, press and hold the
“volume +” and “volume -” buttons simultaneously for 6 seconds until the LED
lights up in red and blue, indicating the pairing information is cleared.
Charging
- When the battery is less than 10%, the headset will give a voice prompt “ battery low” every 3 minutes. Please charge it as soon as possible.
- When EKSAtelecom H1 Pro is not in use, please charge it at least once every 2 months.
- Please use the original charging cable for charging. Charging voltage can’t exceed 5 V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>