PEEQ LLC POM1 Real-Time Vehicle Tracking System User Manual

PEEQ LLC POM1 Real-Time Vehicle Tracking System

Product Information

Specifications

• Voltage: 3.3~4.2 VDC
• Standby Current: IDLE (35uA @ 3.8V)
• GPS Accuracy: 5-15m
• GPS Band: 1575MHz
• GSM Band: 850/900/1800/1900MHz
• WIFI Band: 2.4 GHz (receive only)
• LTE Band (Cat M1): B1/B2/3/4/5/8/12/13/20/25/26/28/66/85
• Working Temperature: -20~75°C
• Hot/Warm/Cold Start: Yes
• Dimensions (mm): Arrange

Product Usage Instructions

Install Device
Follow the installation instructions provided in the manual to properly install the LTE Cat M1 Tracker.

Power On/Off

Power On
To power on the device, press and hold the power button until the LED indicators light up.

LED Indicators
The LED indicators will provide information about the device’s status. Refer to the manual for details on the different LED indications.

Power Off
To power off the device, press and hold the power button until the LED indicators turn off.

Trouble Shooting

Cannot Connect to Platform
If you encounter issues connecting to the platform, refer to the troubleshooting section in the manual for step-by-step instructions on resolving the problem.

FAQ

• Q: What should I do if the device does not power on?
  A: Make sure the device is charged and try again. If the issue persists, contact customer support for assistance.

• Q: How often does the device upload GPS data?
  A: The device uploads GPS data regularly through LTE/GPRS for real-time tracking and history track playback.

Welcome to use our device， please read this manual carefully to install and operate the device exactly. This user manual is for reference only. If some contents and operation steps are inconsistent with those for the actual product, the latter will prevail.

Product Features

• Supports GSM/LTE CAT M1.
• GPS precise positioning, Support A-GPS, uploaded by LTE/GPRS regularly, real-time tracking and history track playback.
• Serial port.
• Built-in G-sensor, vibration, alarm.
• Built-in L-sensor, Brightness alarm.
• Built-in T-sensor,  Records temperature

Basic Specifications

Components

SIM Card Installation

• Open the packing case, check if the device is OK and the accessories are intact,
• You need a suitable SIM card to use the device, contact your dealer if any questions;

SIM card installation requires the case to be disassembled

Note:

• Please cut off the power before installing or uninstalling the SIM card.
• SIM cards should have GPRS/LTE functions.

Application of equipment

Install device

Please place the device in the item that needs to be monitored

Installation Notice

• Keep the device away from RF emission sources.
• Device Built-in GSM/LTE antenna and GPS antenna, Please ensure that the signal receiving side is facing up(towards the sky) when doing installation, without any metal material covered on the top. It may weaken the signal and result in not working properly.

Power On/Off

Power on
Power on: Insert a valid SIM card, then open the plug and use the card pin to gently touch the key for 2 seconds.

LED Indicators

• The red LED blinks quickly when the device is searching for a GSM/LTE network, and intermittently when the device successfully registers for a GSM/LTE network.
• The blue LED flickers fast when the device is searching for the GPS satellite signal, it flickers intermittently when the device has searched the satellites and can be positioned. the device enters the charging state, the red light is on. When the external battery of the device is full or not in the charging state, the red light is off.

1. Red LED(Indicating charging and GSM/LTE working status)
   light up| be charging
   ---|---
   OFF| The battery is in the full or uncharged state
   fast blink| Searching GPRS/CATM network
   Slow flicker| The        GPRS/CATM

network is connected

2. Blue LED(indicates GPS signal state)

Power off
Use the card needle to lightly touch the button for 1-2 seconds

Troubleshooting

Cannot connect platform
the device is never online on the position server when installed the first time. Please check the device:

1. Check if the battery level is sufficient.
2. Is SIMthe c d is led correctly? Please refer to the installation instructions.
3. Check the status of LED indicators. If the device is OK, Green LED and blue LED will intermittently flick.
4. Inquiry parameters of the device via dealer support team.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
   the equipment.

NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.
• These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user.s body and the device, including the antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>