OMEKNTOP 550210 Freestanding Tub Faucets Black Tub Filler User Manual
- June 1, 2024
- OMEKNTOP
Table of Contents
OMEKNTOP 550210 Freestanding Tub Faucets Black Tub Filler
Specifications
- If static pressure exceeds 0.5MPa, a pressure-reducing valve must be fitted.
- Avoid major pressure differences between hot and cold water supply.
Product Usage Instructions
Installation
Tools required for installation:
- Cold water supply line
- Hot water supply line
- 42mm (1.65 Inch) wrench
- 115mm (4.53 Inch) wrench
1. Ensure that the seals are correctly seated during installation.
2. Flush all supply lines prior to installation.
3. Shut off both HOT and COLD supply lines after flushing.
4. Position the faucet in the desired direction for operation.
5. Divide the hot water and cold water connections appropriately.
Functionality
1. Check connections for leaks and ensure proper function of the fittings.
2. Tighten the screws evenly and alternately to secure the faucet in place.
Maintenance
1. Inspect and clean all components regularly, replacing any damaged parts as necessary.
2. Shut off the water supply before conducting any maintenance work.
3. To maintain a clean and bright surface:
- Use rinsing water and a soft cloth to clean the faucet surface.
- Clean any residues with approved cleansers:
- Soft liquid cleanser
- Colorless glass cleanser
- Totally soluble powder cleanser without abrasive capability
- Avoid using abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, solvents, or other harsh products on the chrome finish.
- Rinse thoroughly after cleaning and dry with a soft cloth.
FAQ
- Q: Can I use detergent powder to clean the faucet?
- A: No, detergent powder should not be used as it may scratch the finish. Use only approved cleansers mentioned in the manual.
- Q: How often should I inspect and clean the components?
- A: It is recommended to inspect and clean all components regularly to ensure proper functioning and longevity of the faucet.
PRODUCT INFORMATION
INSTALLATION STEPS
TOOLS REQUIRED FOR INSTALLATION
OPERATION AND MAINTENANCE
Specifications
- Minimum Flow Pressure:————————————0.05MPa
- Recommended Flow Pressure:————————-0.1-0.5MPa
- Operating Pressure: ————————————-Max.1.0MPa
- Test Pressure:—————————————————1.6MPa
- Maximum Hot Water:———————————————–90°C
- Recommended Hot Water:—————————————-60°C
- Environmental Temperature :——————————-5°C-49°C
If static pressure exceeds 0.5MPa, a pressure-reducing valve must be fitted. Avoid major pressure differences between hot and cold water supply
Operation
When installing the faucet, ensure that the seals are correctly seated. Flush all supply lines prior to installation. Shut off both HOT and COLD supply line after flushing. Please make sure the direction of the faucet should face to. Please divided the hot water and cold water
Function
Check connections for leaks and check function of fitting. Tighten the screws evenly and alternately
Maintenance
Inspect and clean all components and replace if necessary. Shut off water supply for maintenance work. To keep the surface clean and bright, please clean the faucet regularly
- Use rinsing water and soft cloth, clean the bilge and bilge membrane on the surface to the best of the abilities.
- Cleaned the residua with the following cleansers only.
- Soft liquid cleanser
- Colorless glass cleanser, totally soluble powder cleanser without abrasive capability.
- Never use detergent powder, polishing powder, a nylon brush, or anything that may scratch the finish.
- Never use cleanser, emery cloth or handkerchief which can rub.
- Never use cleanser containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, solvents or other products not recommended for chrome.
- Never use silicone gel containing acetic acid.
- After cleaning, rinse to flush the cleanser off and dry with a soft cloth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>