ico W3202 Avento Towel Warmer Installation Guide
- June 1, 2024
- ICO
Table of Contents
AVENTO TOWEL WARMER
I NSTALLAT I ON GU I DE
W3202 / W3203 / W3204 / W3205 / W3206 / W3208
23.5” x 31” Hardwired877-757-8930
www.icobath.com
Towel Warmer Installation Procedure **
**
STEP 1
Rough-in Requirements (see figure 3)
- The incoming power feed goes to a deep single gang electrical box (for the controller). This electrical box can be located anywhere in the room, although we recommend it be alongside your light switches.
- A power feed then goes from the controller electrical box to a single gang electrical box (for towel warmer). The location of this electrical box governs the location of your towel warmer (see figure 2).
- Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations.
STEP 2
Installation Instructions (see figure 1)
- Check all items have been received. You should have received a towel warmer, hardwire kit, programmable controller and mounting bracket kit. Read all instructions before continuing.
- Fix wall supports “B” including collar “A” to the wall using the screws provided and in locations as shown on figure 2.
- Screw the threaded pin “C”, into the threaded bushing “D” on the back of the towel warmer.
- Hang and adjust the towel warmer using set screws “E” to lock pin “C” in the wall bracket “B”. Ensure the towel warmer is firmly and safely fixed.
STEP 3
Hardwire Connection (see figure 4)
Do not connect the towel warmer to the power supply until all instructions
have been read and installation carried out in accord with them. The heating
element is 150W, 300W or 450W 110V. The element conforms to UL standards and
the unit to CSA standards (File ref: 229718). Ensure the CSA label is
visible. TURN OFF POWER SUPPLY BEFORE PROCEEDING.
- Feed the electrical cord located at the bottom of the towel warmer first through the round tube “G” and then through the cover plate “F”.
- Complete all electrical connections as shown in figure 3.
- Fit tube “G” over towel warmer element sleeve until it meets the hexagonal chrome collar.
- Push cover plate “F” onto tube.
- Screw cover plate to electric box with the enclosed screws. Adjust where necessary.
Technical Drawing
Warning:
In case of damage or failure of the towel warmer the unit should be returned
to the manufacturer or their distributor. The warranty of 2 years on the
heating element and limited lifetime on the towel warmer frame is NOT VALID in
case of improper use or installation. Do not hang towel warmer upside down.
Product is designed for use within Canada and the United States only.
Specifications
Model #| Description| Finish| Weight (lb)| Element
Size| Output (BTU)| WxH (mm)| WxH (Inches)| Metal Type
---|---|---|---|---|---|---|---|---
W3202| Electric Hardwire| Matte White| 27| 300W| 1024| 600 x 790| 23.5 x 31|
Mild Steel
W3203| Electric Hardwire| Chrome| 27| 150W| 512| 600 x 790| 23.5 x 31| Mild
Steel
W3204| Electric Hardwire| Brushed Nickel| 27| 150W| 512| 600 x 790| 23.5 x 31|
Stainless Steel
W3205| Electric Hardwire| Matte Black| 27| 300W| 1024| 600 x 790| 23.5 x 31|
Mild Steel
W3206| Electric Hardwire| Polished Nickel| 27| 150W| 512| 600 x 790| 23.5 x
31| Mild Steel
W3208| Electric Hardwire| PVD Brushed Gold| 27| 150W| 512| 600 x 790| 23.5 x
31| Mild Steel
Heating Element Specifications: 150 watt / 300 watt / 450 watt, 12″ long / 18”
long / 23” long, 110 volt, 60 Htz, IP55 cord, ULC approved
Material Specifications: Mild Steel – Din 2394 Quality – ST 34-2 KB /
Stainless Steel – Din 17457 Quality – 1.4301 Warranties:
- Towel Warmer Frame: Limited lifetime warranty. Refer to www.icobath.com for full warranty coverage details.
- Heating Element: 2 years
- Programmable Controller: 2 years
Fixings: Screws, and Allen Key (if needed) are included.
Heating Element Location: Right-hand vertical tube unless specified otherwise.
Care & Maintenance: A periodic wash using warm water and a soft cloth will
retain the high quality finish of your towel warmer for many years to come. ON
NO ACCOUNT should any household bleaches, detergents, abrasive polishes, steel
wool or other cleaning agents be used on this item.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>