llitt 480021 Alexandra LED Strip User Manual
- June 1, 2024
- Llitt
Table of Contents
Alexandra
User Manual
Art.nr. 480021
480021 Alexandra LED Strip
Warning
- Make sure the power supply is DC 24V only;
- Don’t ever disassemble or repair under any circumstances;
- When the lamp is not used for a long time, please disconnect the power supply;
- Do not overload the circuit, otherwise it may cause electric shock or fire.
Download app and Register account
a. You can download the App by searching Tuya Smart in mobile app stores or scanning the following QR code.
https://smartapp.tuya.com/tuyasmart
b. Open the APP, click “Sign Up” and create your account according to the prompt.
Fixture Connection
Note:
a. Make sure the fixtures are blinking after power on, either fast or slow, if
not, power ON/OFF the Smart box by 3 times till you see the blink.
b. If EZ mode is not working, change to AP mode(some routers don’t support EZ
mode).
EZ Mode(Easy-Connect Mode)
If you
could see the rapid blinks from the connected fixtures, click “Confirm the light
is blinking rapidly” →“Next”; If not, reset by turning Off/On by 3 times till
it appears.
Enter your WI-FI and password, click “Next”.
Note: Only 2.4 GHz network are supported.
Click
“Done” after the connecting process is completed, now the fixtures are added
successfully.
AP Mode (Access Point Mode)
Click “AP Mode”→“ Confirm the light is blinking slowly”→ “Next” .
If you see the rapid blinking instead of slow ones, reset to AP mode by
turning OFF/ON 3 times.
Enter your WI-FI name and password, click “Next”, you’ll see the hotspot named
“Smartlife-XXX” generated from the Smart box, click “Go to Connect” .
Note: Only 2.4 GHz network are supported.
Go back to TUYA app, click “Done” after the connection process is completed.
Nexa Trading AB
Tallvägen 5, SE-564 35 Bankeryd, Sweden
info@nexa.se, www.llitt.com