Bathlink ACMC-1DC-2032L Lighted Medicine Cabinet Instruction Manual

Bathlink ACMC-1DC-2032L Lighted Medicine Cabinet

Specifications:

• Model Codes: ACMC-1DC-2032L, ACMC-1DC-2032R, ACMC-2D-3030, ACMC-2DC-3032
• Indoor Use Only
• Power Input: 100v-120v, 50/60Hz
• Material: Aluminum pendant, ST4*35 screws

Product Usage Instructions

Before Installation:

1. Read the instructions carefully.
2. Installation should be done by a qualified professional.
3. Turn off electrical connections before installation.
4. Ensure you have the necessary tools.

Installation Steps:

1. Confirm installation height and mark hole positions on the wall.
2. Drill holes using a 1/4 (6mm) drill.
3. Attach the aluminum pendant to the wall with screws and connect electricity.
4. Hang the mirror cabinet after turning on the power.

Maintenance and Cleaning:
Clean with a damp soft cloth, avoid acidic or alkaline cleansers.

Safety Instructions:

• Keep away from water and electricity when hanging on the wall.
• Ensure there are no obstacles inside the wall before installing.
• The product is fragile, install it with suitable protective equipment.

Adjusting Cabinet Doors:

• Doors may need adjustment after shipping.
• Doors have a three-way adjustment feature for closing speed.

FAQ:

• Q: Can this mirror cabinet be used outdoors?
  A: No, this product is for indoor use only.

• Q: What should I do if the cabinet doors are not closing properly?
  A: You can adjust the closing speed of the doors by following the provided instructions in the manual.

Model Code

• ACMC-1DC-2032L
• ACMC-1DC-2032R
• ACMC-2D-3030
• ACMC-2DC-3032

Mirror Diagram

Before Installation

• Please read these instructions carefully before installation.
• Installation should be only carried out by a qualified professional.
• ENSURE THAT ELECTRICAL CONNECTIONS ARE TURNED OFF AT THE CONSUMER UNIT OR FUSE BOARD BEFORE INSTALLING OR CARRYING OUT ANY MAINTENANCE.
• Please take note of the Tools Required before commencement of any installation procedures.
• Follow the Installation Steps on Page 2 to ensure that the correct installation method is adhered to. Please also read all operating and safety instructions before commencing any installation to ensure a complete understanding of the installation procedure.
• All information provided by these guidelines is based on the latest technical product information. We reserve the right to change the product characteristics, packaging, or supply without prior notice.
• These guidelines include maintenance and cleaning advice.
• THIS PRODUCT IS FOR INDOOR USE ONLY.
• WARNING: There may be hidden dangers to people or products during installation. To avoid trapping fingers, please pay attention to the open and closed door position.
• WARNING: Do not use any acidic or alkaline cleanser or alcohol on this product. Please clean with a damp soft cloth.
• WARNING: Keep away from water and electricity when hanging on the wall.
• IMPORTANT: This product is a one-way hanging mirror. Please make sure that there are no obstacles (i.e. electrical cable/water pipework) inside the wall before commencing the installation procedure.
• WARNING: This product is fragile – it should be installed by a professional person with suitable protective equipment, as listed in the Tools Required above.

Material Statement

Two persons are required for the correct installation

• [1] MIRROR CABINET X1
• [2] Wall plugs X3
• [3] ST4*35 screw X3
• [4] Aluminum pendant X1

Installation

1. Confirm the installation height and aluminum pendant installation position, and mark the hole position on the wall.
2. Use a 1/4″(6mm) drill to drill holes at the marked points to a depth of 1¾”(45mm), then apply the wall anchors with a hammer . Mount the aluminum pendant to the wall with screws, then connect the electricity.
3. Hang the mirror cabinet after turning on the power.
4. Doors may need to be adjusted after the initial shipping of the cabinet. The cabinet doors have a three-way adjustment feature.

Adjust the closing speed of the door:

1. Dclockwise to increase the closing time;
2. Counterclockwise to reduce the closing time.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>