Henry HE16153004 Low VOC Water Cut Off Mastic Instructions
- June 1, 2024
- Henry
Table of Contents
Henry HE16153004 Low VOC Water Cut Off Mastic
Low-VOC Water Cut-Off Mastic
USES
Low-VOC Water Cut-Off Mastic is a one component, low viscosity, self-wetting
butyl blenc specially compounded for use with various elastomeric membranes.
It is designed expressly for use under compression as a sealing agent between
membranes and most substrates.
SURFACE PREPARATION
All surfaces to be sealed with Low-VOC Water Cut-Off Mastic must be dry and free from oil, grease, mica dust, dirt and other foreign materials.
APPLICATION
Apply a 3/8″ to 1/2″ (9-12mm) bead of mastic to yield 10 linear feet (3
meters) per cartridge. Bring the mating surface of the membrane into contact
with the mastic, avoiding bridging or wrinkles.
- Roll or press membrane firmly against the mastic and substrate to assure complete contact, eliminating trapped air.
- DO NOT USE as splicing cement between rubber membrane when making splices.
- DO NOT USE as Lap Sealant. Jobsite storage temperatures in excess of 90°F (32°C) may affect product shelf life.
Hazardous Ingredients: Polybutene (Trade Secret), Solvent naphtha, petroleum, light aliphatic (CAS# 64742-89-8), Hydrous clay (Mixture), PCBTF (CAS# 98-56-6), Severely hydrotreated paraffinic oil (Trade Secret), Silica compound (Trade Secret)
WARNING: Cancer www.P65Warnings.ca.gov
For Transportation Emergencies Call 3E Company: 1-866-519-4752 (access code 334832) voC – 250 g/L, max Category – All other sealants
Low-VOC Water Cut-Off Mastic
DANGER
Causes skin irritation. Suspected of causing cancer. May cause respiratory
irritation. May cause drowsiness or dizziness. Highly flammable liquid and
vapor.
Prevention
Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Use personal protective equipment
as required. Wash face, hands and any exposed skin thoroughly after handling.
Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a
well-ventilated area. Keep away from heat/sparks/open flames/hot surfaces. –
No smoking. Keep container tightly closed. Ground/bond container and receiving
equipment. Use explosion-proof electrical/ ventilating/ lighting/ equipment.
Use only non-sparking tools. Take precautionary measures against static
discharge. Keep cool.
HENRY COMPANY 336 Cold Stream Rd Kimberton, PA 19460 800-486-1278 henry.com
614745 | HE16153004 025.HE.16153.1223
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>