sylvac S-Depth EVO Smart Rotary Pin Instructions
- June 1, 2024
- sylvac
Table of Contents
sylvan S-Depth EVO Smart Rotary Pin
Specifications:
- Model: S_Depth EVO Smart
- Frequency: 2.4GHz (2.402 – 2.480GHz)
- Modulation: GFSK (Gaussian Frequency Shift Keying)
- Transmission Power: Class 3, 1mW (0dBm)
Product Usage Instructions
-
Mode Selection:
To select different modes, press the MODE button. The display will show available modes, and you can navigate through them using the SET button. -
Data Input:
Use the SET button to input data. Press and hold to change the value. Use the MODE button to confirm the input. -
Unit Selection:
To switch between units (MM or Inch), press and hold the SET button for more than 1 second. -
Favorite Settings:
To access your favorite settings, press and hold the DATA button for more than 1 second. Navigate through the options using the SET button.
FAQ
- How do I reset the device?
- To reset the device, press and hold the reset button for more than 2 seconds.
- How do I pair the device?
- To pair the device, access the PAIr mode by pressing the SET button in conjunction with other specified actions as per the manual.
Instructions
Replacing the battery
Button Description
Configuration
| off | disconnected |
|---|---|
| blinking | advertising |
| on | connected |
| rESEt | clear pairing information |
| MAC | display the MAC address MAC |
| SIMPLE | profile without pairing |
| PAIr | paired and secured profile |
| HId | virtual keyboard |
Technical Data
| Frequency band | 2.4GHz (2.402 – 2.480GHz) |
|---|---|
| Modulation | GFSK (Gaussian Frequency Shift Keying) |
| Max output power | Class 3: 1mW (0dBm) |
| Range | Open space: <15 m |
Industrial environment: 1-5 m
Autonomy| Continuous : up to 2 months (Always connected with 4 values /s.)
Saver : up to 5 months (The instrument sends value only when the position has changed)
Blind/Push : up to 7 months (Value is sent from the instrument (button) or requested from the computer)
Specifications
| Resolution | 0.01 / .0005’’ |
|---|---|
| Measuring range | 150 mm – 6’’ / 200mm – 8’’ / 300mm – 12’’ |
| Max. error | 100mm: 20µm |
100-300mm: 30µm (DIN862)
Repeatability| 10µm / .0005’’
Max slider speed| Max 2.5m/s. – 100’’/s.
Display refresh rate| > 10 / s.
Data output| Bluetooth® 4.0 2.4GHz
Mean power consumption. Consumo| 45 µA
Battery life| Bluetooth® OFF: 8000h
Bluetooth® ON : See Bluetooth® technical data
Working temperature (storage)| +5° to +40°C
(-10° to +60°C)
Measuring system| Sylvac system patented
IP specification| IP 67 (IEC60529)
Frame| 16×3.5mm / 0.62x 0.11’’
Functions| Zero setting, preset (max 999.99), mm/inch, Hold, Data
Error Messages
Certifications
CERTIFICATE OF CONFORMITY
We certify that this instrument has been manufactured by our Quality Standards
and tested concerning masters of certified traceability by the Federal
Institute of Metrology.
Bluetooth® Certification
DESCRIPTION OF BLUETOOTH® MODULE:
This module is based on Nordic Semiconductor nRF8001 μBlue Bluetooth Low
Energy Platform. The nRF8001 is a single-chip transceiver with an embedded
baseband protocol engine, suitable for ultra-low power wireless applications
conforming to the Bluetooth Low Energy Specification contained within v4.0 of
the overall Bluetooth specification. The nRF8001, used in the current revision
of ISP091201, is a production product using a RoM for the baseband protocol
engine.
US/CANADA CERTIFICATION
This device contains
- FCC ID: 2AAQS-ISP091201
- IC: 11306A-ISP091201
Maintenance
Carefully dry all mechanical parts of the instrument after contact with liquids to ensure proper operation and avoid corrosion. Don’t use aggressive products (alcohol, trichloroethylene, or others) to clean plastic parts. Don’t expose the instrument to direct sunlight, heat, or humidity.
FCC STATEMENT
NOTICE:
Changes or modifications made to this equipment not expressly approved by
Sylvac may void the FCC authorization to operate this equipment.
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions.
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
A digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used under the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
RADIOFREQUENCY RADIATION EXPOSURE INFORMATION:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sylvac is under license. Other trademarks and trade names are those of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>