TRIVIDIA HEALTH ZE4TVH08 Blood Glucose Meter User Guide

June 1, 2024
TRIVIDIA HEALTH

TRIVIDIA HEALTH ZE4TVH08 Blood Glucose Meter

TRIVIDIA HEALTH ZE4TVH08 Blood Glucose Meter

Blood Glucose Meter

Blood Glucose Meter

Lancing Device and Lancet

Images are for illustration purposes only. Your lancing device/lancet may look different.
Refer to your lancing device/lancet instructions for use for detailed information

Lancing Device and Lancet

Test Strip

Test Strip

Before You Test

✔ Contact your Doctor or Healthcare Professional to determine how often you should test and what your target ranges are for blood glucose results.
ALWAYS read the Owner’s Booklet before testing for the first time and before using this Quick Reference Guide.

Let’s start the blood glucose test now

  1. Wash hands. Rinse well. Dry thoroughly. Refer to lancing device Instructions for Use for detailed instructions on cleaning and disinfecting the fingertip.
    Let's start the blood glucose test now

  2. Pull to remove the lancing device cover.
    Let's start the blood glucose test now

  3. Insert a lancet into the lancing device until it comes to a full stop. Remove the lancet cap.
    Let's start the blood glucose test now

  4. Push the lancing device cover back on.
    Let's start the blood glucose test now

  5. Twist the depth dial to adjust the puncture depth.
    Choose a higher number for deeper puncture depth.
    Let's start the blood glucose test now

  6. Pull the spring mechanism back to arm the lancing device.

  7. Remove one test strip from vial. Close vial immediately.
    Use test strip quickly after removal from vial.
    Let's start the blood glucose test now

  8. With meter off, insert test strip contact end (blocks facing up) into Test Port. Meter turns on.
    Keep test strip in meter until testing is finished.
    Let's start the blood glucose test now

  9. Make sure the lancing device is pressed firmly to your finger.
    Press the release button to lance.
    Attention: If you did not produce a large enough blood sample, gently massage your finger. DO NOT SQUEEZE YOUR FINGER. Adjust the puncture depth and lance again.
    Let's start the blood glucose test now

  10. With test strip still in meter, the meter screen displays the flashing blood symbol, apply the blood sample to the tip of the Test Strip. Hold the tip of the test strip to the blood drop until the meter beeps.
    Let's start the blood glucose test now

  11. After a 5-second count down, meter displays the test result.
    Let's start the blood glucose test now

  12. Hold meter with test strip pointing down. Press test strip release button to discard test strip according to your healthcare professional’s instructions or dispose them in an appropriate trash container. Meter turns off.
    Let's start the blood glucose test now

  13. Remove the lancing device cover. With the lancet cap on the table, stick the needle of the lancet into the lancet cap and remove lancet from lancing device. Please discard them carefully according to your healthcare professional’s instructions or dispose them in an appropriate trash container. Replace the lancing device cover.
    Let's start the blood glucose test now

P/N: 36301481-A.5
ZE4TVH08 Rev. 1

Caution: Before testing, please read the Owner’s Booklet and this Quick Reference Guide carefully

Customer Consultation

  1. FDA Public Health Notification: Use of Fingerstick Device son More than One Person Poses Risk for Transmitting Blood borne Pathogens: Initial Communication. Available at https://wayback.archiveit.org/7993/20170111013014/ http://www.fda.gov/MedicalDevices/SafetyAlertsandNotices/ucm224025.htm.
  2. Glucose Monitoring and Insulin Administration Available at https://www.cdc.gov/injectionsafety/blood-glucose-monitoring.html.

English or Spanish, Monday – Friday,
8AM-8PM EST, 1-800-803-6025
www.trividiahealth.com

LogoLogo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals