TIGA SRSW01 Robot Mower Instruction Manual

TIGA SRSW01 Robot Mower

Specifications:

• Model: Cableguided Robot Lawnmower
• Brand : STIGA
• Platform: SRSW01
• Language Options : English, Deutsch, Italiano, Nederlands, Norsk, Svenska, Dansk, Suomi, Cesky, Polski, Magyar, Eesti, Hrvatski, Lietuviskai, Latviesu, Slovenscina, Russian

Product Usage Instructions

Safety

OBLIGATION: Read carefully before use and store for future reference.

Safe Operating Procedures

General Information:

• Do not operate the machine with defective guards or safety devices.
• Avoid putting hands or feet near rotating parts.

Training:

• Read the instructions carefully and learn the controls.
• Do not allow children or inexperienced individuals to operate the machine.

Preparation:

• Ensure the perimeter delimitation system is correctly installed.
• Regularly inspect the area for foreign objects that may interfere with the operation.
• Check blades and cutting unit for wear or damage.

Operation

Follow these guidelines during machine operation:

• Avoid touching moving parts until they have stopped.
• Wear appropriate clothing and footwear.
• Do not leave the machine unattended while in operation.

FAQ

• Q: Where can I find the complete instruction manual?
  • A : The complete manual is available on the website stiga.com, on the STIGA GO app (App Store/Google Play), or by scanning the QR code.
• Q: Which models do these instructions apply to?
  • A : These instructions apply to all cable-guided robot lawnmower models. Illustrations refer to the SRSW01 platform unless otherwise indicated.

The complete instruction Manual is available:

• on the website stiga.com
• on the STIGA GO app, available on the App Store and Google Play
• by scanning the QR code

NOTE : The instructions in this manual apply to all cable-guided robot lawnmower models. All illustrations, unless otherwise indicated, refer to the SRSW01 platform.
NOTE : This manual contains basic instructions, mainly related to safety. For correct installation, the complete instruction manual (see above) must be read and followed carefully.

SAFETY

OBLIGATION:

Read carefully before use and store for future reference.

SAFE OPERATING PROCEDURES

Training

• a. Read the instructions carefully, learn the controls and the correct use of the machine.
• b. Never allow children, persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, or persons unfamiliar with these instructions, to operate the machine. Local regulations may limit the age of the operator.
• c. The operator, or user, is to be held responsible for accidents or hazards involving third parties or third-party equipment.

Preparation

• a. Make sure that the automatic system of perimeter delimitation is installed correctly as indicated.
• b. Periodically check the area where the machine is used and remove stones, sticks, cables and any other foreign objects that may interfere with its operation.
• c. Periodically carry out a visual inspection of the blades, blade bolts and of the cutting unit to check that they are not worn out or damaged. Replace worn-out or damaged blades and bolts in pairs to maintain the balance of the machine
• d. Warning signs must be placed around the working area of the machine if it is used in public areas or areas open to the public. Signs must read as follows: “Warning! Automatic lawn mower! Keep away from the machine! Children must be supervised!”

OPERATION

General information

• a. Do not operate the machine with defective guards or safety devices that are not present, for example without protections.
• b. Do not put hands or feet near or under the rotating parts. Always keep away from the drain opening.
• c. Do not touch any moving parts of the machine until they have come to a complete stop.
• d. Always wear sturdy shoes and long trousers when operating the machine.
• e. Never lift or transport the machine when the motor is running.
• f. Remove the disabling device from the unit:
  • Before removing an obstruction;
  • Before checking, cleaning or working on the machine;
  • If hit by a foreign object, to check for possible damage to the machine;
  • If the machine starts to vibrate abnormally, check for damage before starting it.
• g. Do not leave the machine in operation unattended in the presence of pets, children or other people nearby.

Maintenance and storage

• a. Tighten all nuts, bolts and screws securely for safe operation of the machine.
• b. Frequently check the robot lawn mower for wear or deterioration.
• c. For safety reasons it is necessary to replace worn out or damaged parts.
• d. Make sure that the blades are replaced only with suitable spare parts.
• e. Make sure the batteries are recharged using the correct charger recommended by the manufacturer. Incorrect use can cause electric shock, overheating or leakage of corrosive liquid from the battery.
• f. In case of electrolyte leaks, wash with water / neutralizing agent and consult a doctor in case of contact with eyes, etc.
• g. Machine maintenance must be carried out in accordance with the manufacturer’s instructions.

Residual Risks

• Although the product complies with all safety requirements, additional risks may still exist due to improper installation and/ or unforeseeable circumstances. Therefore, the area on which the product will operate must be free of objects, people and animals, and all persons who may have access, even occasionally, to the work area must be informed of the possible hazards.
•  In the event of thunderstorms with risk of lightning and in anticipation of bad weather conditions in general, it is recommended not to use the product and to disconnect the perimeter cable from the charging base and all peripheral devices from the mains.

To use the product, reconnect the perimeter cable and peripherals to the mains following the manual’s instructions.

PRODUCT DESCRIPTION

The robot lawn mower is designed to mow the grass around areas of the garden delimited by the perimeter cable. The operating principle is based on random navigation. The robot lawn mower changes trajectory whenever the perimeter cable or an obstacle is detected.
Any other usage may be hazardous and harm persons and/ or damage things. Improper use includes (for example, but not limited to): transporting people, children or animals on the machine; being transported by the machine; using the machine to pull or push loads; using the machine for cutting non-grass vegetation.

Platform TYPE : SRBW01 is equipped with a 3G/4G module with SIM card and a GNSS module, allowing the remote control of the robot lawn mower and navigation assistance functions.

SYMBOLS AND NAMEPLATES

WARNING:
Read the user instructions before starting the product.
WARNING:
The danger of projections of objects against the body.
Keep an adequate safe distance from the machine while it is running.
WARNING:
Do not put hands and feet near or under the opening of the cutting means.
Remove the disabling device before operating on the machine or before lifting it.
WARNING:
Do not put hands and feet near or under the opening of the cutting means.
Do not stand on the machine.
BAN:
Make sure that there are no people (especially children, elderly or disabled) and pets in the working area during the operation of the machine.

Keep children, pets and other people at a safe distance when the machine is functioning.
BAN:
Do not use high-pressure cleaners on the machine to clean or wash it.

Appliance with insulation class III, powered by a battery (Robot Lawnmower) or special power supply unit (Charging Base and Reference Station).

Use the original power supply with the specifications on the rating plate.

DC power supply symbol.

Protection rating against the ingress of solids and water.
Electrical and Electronic Equipment Waste, to be taken to designated facilities for recycling and disposal.
Guaranteed sound power level

Warning

STOPPING AND TURNING OFF THE ROBOT LAWN MOWER IN SAFE CONDITIONS

OBLIGATION:

Always switch off the robot lawn mower in safe conditions before any cleaning, transport or maintenance operation.

1. Press the “STOP” button (Fig. 1.A) to stop the robot lawn mower safely and open the protective cover (Fig. 1.B).
2. Press the off button (Fig. 1.E) for a few seconds and wait for the LED on the same button to go out.
3. Only after the LED has gone out (Fig. 1.E), remove the safety key (Fig. 1.D) to switch off the robot lawn mower in safe conditions.
4. The robot lawn mower is stopped or switched off in a safe condition.

INSTALLATION

WARNING:

Do not modify, tamper with, elude or eliminate the safety devices installed

NOTE : For further clarification on the installation of the product please contact a STIGA dealer.

INSTALLATION COMPONENTS (Fig. 2)

(A) Charging base, (B) Power supply, (C) Perimeter cable, (D) Perimeter cable fixing pegs, (E) Fixing screws for the charging base, (F) Joint for perimeter cable, (G) Charging base connectors

VERIFICATION OF THE INSTALLATION REQUIREMENTS

GARDEN ASSESSMENT:

• Check the garden’s condition by.
• Level the ground to prevent puddles from forming after a rainfall.

CHECKS FOR THE INSTALLATION OF THE CHARGING BASE AND POWER SUPPLY:

ELECTRICAL HAZARD: It is absolutely necessary to provide an electrical outlet that complies with the relevant laws of the country.
ELECTRICAL HAZARD: The circuit provided must be protected by a residual current device (RCD) with an activation current not exceeding 30 mA.
ELECTRICAL HAZARD:
Do not connect the power supply to an electrical outlet if the plug or the cable is damaged.
Do not connect or touch a damaged cable before it is disconnected from the power supply.

A damaged cable can lead to contact with live parts.

1. Provide a flat surface at the edge of the lawn to position the charging base.

2. Ensure that the distance of the base from any bends is at least 200 cm.

   • WARNING:
     The power cable, power supply unit, extension cord, and all other electric cables that do not belong to the product must remain outside the cutting area to maintain their distance from hazardous moving parts and prevent damage to cables that may come into contact with live parts.

3. Set up the installation area of the power supply unit in such a way as to prevent it from being submerged by water under all weather conditions. Preferably installed in a closed room and protected from weather conditions, in a location not easily accessible by unauthorized persons.

MAIN VERIFICATIONS FOR THE INSTALLATION OF THE PERIMETER CABLE:

1. Check that the maximum slope of the work area is less than or equal to 45% or 50% depending on the model (see Par. 7 TECHNICAL DATA), and comply with the rules shown in Fig. 3
   • WARNING: The robot can mow surfaces with a maximum slope of 45% or 50% depending on the model. In case of non-compliance with the instructions, the robot may slip and exit the work area
   • WARNING : Areas with slopes higher than allowable slopes cannot be mowed. Then place the perimeter cable before the slope, excluding that area of lawn from the mowing.
2. Check the entire work surface: assess the obstacles and areas to be excluded from the work area, which must be delimited with the perimeter cable.

CRITERIA FOR INSTALLING THE PERIMETER CABLE

Following are the criteria used to install the perimeter cable, for more detailed information please refer to the complete instruction Manual.

CAUTION:
The operating area and in general the areas where the robot lawn mower can navigate must be delimited by a non-crossable fence. Ensure that the fence is suitably enclosed or monitor the robot lawn mower while operating.

COMPONENTS INSTALLATION

ELECTRICAL HAZARD:

Only use the battery charger and power supply provided by the manufacturer. Improper use may cause electric shock and\or overheating.

CAUTION:

The danger of cutting hands. Use protective gloves to avoid cutting your hands.

CAUTION:

The danger of dust in the eyes. Use safety glasses to avoid the danger of dust in the eyes.

ELECTRICAL HAZARD:

Connect the power supply only at the end of all the installation operations. If necessary during the installation, turn off the general power supply

INSTALLATION OF THE PERIMETER CABLE POSITIONING WITH PEGS

1. Run the perimeter cable starting from the installation area of the charging base.
2. Run the cable along the entire length of the route and secure it using the pegs provided (Fig.7.B) approximately 100 cm apart, and complying with the installation requirements provided (See par. 2.2).
3. Leave 2 m of cable or more to subsequently cut it to size in the final phase of the connection.
4. When making a bend, position the cable in such a way to ensure that the bending radius is approximately 20 cm (Fig. 7.A).

WARNING: Make sure that the cable is in contact with the ground along its path to prevent the robot lawn mower from damaging it.

NOTE : The perimeter cable used for installation must be at least 40 m. long. If the cable is shorter, it will be necessary to install the resistor code 122063053/0. Refer to the complete instruction Manual.

CHARGING BASE INSTALLATION

Install the charging base aligned with the perimeter cable so that the robot will be able to access it by navigating the perimeter cable clockwise.

1. Check the installation requirements as indicated in par.2.2.
2. If necessary, prepare the ground so that the surface of the charging base is at the same level as the lawn, the ground must be perfectly flat and compact in order to avoid deformation of the surface of the charging base.
3. Remove the cover (Fig. 8.C).
4. Position the charging base aligned with the perimeter cable (Fig. 8.D2) so that the robot is able to access it by navigating around the perimeter cable clockwise.
5. Insert the two ends of the cable into the appropriate slots (Fig. 8.E2).
6. Cut the ends of the cables to the exact length.
7. Apply the self-drilling connectors on the cable (Fig. 9.F),(Fig. 9.G),(Fig. 9.H).
8. Connect the connectors to the terminals (Fig. 8.I).
9. Fix the charging base (Fig. 10.L) to the ground with the fixing screws (Fig. 10.M).
10. Put the cover back on (Fig. 10.C).
11. Connect the power supply unit to the charging base and screw in the connector.
12. Connect the power supply plug to the electrical outlet.
13. Make sure that when the robot lawn mower is not in the charging base, the warning light on the charging base (Fig. 10.N) is lit with a fixed light

CHARGING THE ROBOT LAWN MOWER AFTER INSTALLATION

When charged for the first time, the batteries must remain connected for at least 2 hours.

PRODUCT SETTINGS

The automatic operation of the robot lawn mower requires a series of settings that can be made via mobile device (smartphone) iOS or Android with the “STIGA GO” App installed.
NOTE : For a more detailed description of the available functions, please refer to the Complete Instruction Manual.

OPERATION

MANUAL FUNCTIONING OF THE ROBOT LAWNMOWER

The robot lawn mower can be used without performing the programming procedure described (See Par.2.5). In this mode the robot lawn mower carries out a work cycle, returns to the charging base and remains there until the next manual start.

1. Place the robot mower on the charging base or within the perimeter of the installation.
2. Press the “STOP” button (Fig. 1.A) to open the cover (Fig. 1.B) and access the control panel (Fig. 1.C).
3. Press the “ON/OFF” button (Fig. 1.E) for 5 seconds to switch on the robot lawn mower.
4. Press the “MODE SELECTION” button (Fig.1.F), until only the icon flashes (Fig. 1.L).
5. Press the “CONFIRM” push button (Fig. 1.G). The icon (Fig. 1.L) is lit with a fixed light to confirm the operation.
6. Close the cover (Fig. 1.B). The robot lawn mower will start operating.
   • NOTE : this mode may not guarantee adequate coverage of the garden, both in terms of time required and in terms of uniformity of the cutting result, especially if the garden has an irregular shape. To achieve the maximum efficiency of the robot lawn mower, it is recommended to carry out programming (See par. 2.5).

DESCRIPTION OF THE CONTROLS ON THE ROBOT LAWN MOWER

List of controls, indicators, and their function:

• Press the “STOP” push button (Fig.1.A): it is used to stop the robot lawn mower safely.
• “SAFETY KEY” (Fig.1.D): it is used to stop the robot lawn mower safely.
• “ON/OFF” button (Fig. 1.E) is used to turn the robot lawn mower on and off and to reset the alarms.
• “SELECT MODE” push button (Fig.1.F): it is used to select the operating mode of the robot lawn mower and to force it to return to the charging base.
• “CONFIRM” push button (Fig. 1.G): it is used to confirm the set operating mode.
• “SCHEDULED PROGRAMME” luminous icon (Fig. 1.l): it is used to display the scheduled program settings.
• “SINGLE WORK CYCLE” luminous icon (Fig.1.L): is used to display the single work cycle settings.
• “RETURN TO BASE” luminous icon (Fig.1.H): it is used to display the settings of the forced return of the robot lawn mower to the charging base.
• The “BLUETOOTH” push button (Fig.1.M) is only used by the service centre for diagnostic purposes.
• “ALARM” luminous icon (Fig. 1.N): it is used to display alarm statuses.
• “BATTERY” luminous icon (Fig. 1.O): it is used to display the battery charge level.
  • NOTE : For a more detailed description of the commands listed above, please refer to the Complete Instruction Manual.

CHARGING BASE OPERATION

The charging base is equipped with a warning light (Fig.10.N) which lights up as shown below:

• Warning light off: the charging base is powered off or the robot is on the base.
• Steady indicator light: the perimeter cable is correctly connected to the charging base, and the perimeter signal is correctly transmitted.
• Warning light with slow flashing: the perimeter cable is not connected or it’s interrupted.
• Warning light with fast flashing: the perimeter cable is too short or there is a fault in the charging base.

BATTERY CHARGING

The “BATTERY CHARGING” procedure allows to recharge the robot lawn mower manually.

1. Position the robot lawn mower on the charging base (Fig. 11.R).
2. Slide the robot lawn mower onto the charging base, until the charging connector is engaged (Fig. 11.S).
3. Press the “STOP” button (Fig. 11.A) to open the cover (Fig. 11.B) and access the control panel (Fig. 11.C).
4. Turn the robot lawn mower on with the “ON/OFF” button (Fig. 11.E).
5. The “BATTERY” luminous icon (Fig. 11.L) flashes, the robot lawn mower is charging.
6. Close the cover (Fig. 11.B).
7. Leave the robot lawn mower to charge for at least the time shown in Par. 2.4.
   NOTE : Charging the battery before winter storage should be carried out as shown in Par. 4.3.

CUTTING HEIGHT ADJUSTMENT

PLATFORM TYPE SRSW01 – MANUAL ADJUSTMENT

1. Switch off the robot lawn mower in safety conditions (see par. 1.4).
2. Use the height adjuster (Fig. 12.P) to select the desired cutting height so that the patch of grass being cut is not higher than 10 mm.

NOTE : The length of the grass cut by the robot lawn mower must not exceed 10 mm.

PLATFORM TYPE SRBW01 – ELECTRICALLY ADJUSTABLE

Follow APP wizard to adjust the cutting height. The blade height adjustment system requires an initial calibration and subsequent periodic calibrations, which are performed automatically. Calibration can also be performed manually using the dedicated menu in the App

CAUTION: Do not touch the cutting means when adjusting the cutting height.

NOTE : The length of the grass cut by the robot lawn mower must not exceed 10 mm.

MAINTENANCE

CAUTION:
Only use original spare parts.
CAUTION:
Do not modify, tamper with, elude or eliminate the safety devices installed.
CAUTION:
Danger of cutting hands.
Use protective gloves to avoid cutting your hands.
CAUTION:
Danger of dust in the eyes.
Use safety glasses to avoid the danger of dust in the eyes.
WARNING:
Too much water can filter in and damage electrical parts.
BAN :
Do not use pressurized water jets.
BAN:
To avoid irreversible damage to the electrical and electronic components, do not immerse the robot lawn mower, partially or completely, in water.
BAN:
Do not wash the internal parts of the robot lawn mower to avoid damaging the electrical and electronic components.

BAN:

Do not use solvents or petrol so as not to damage varnished surfaces and plastic parts.

SCHEDULED MAINTENANCE

For a better operation and longer life, be sure to clean the product regularly and replace worn parts. Perform the interventions following the frequency indicated in the table.

It is necessary to carry out maintenance servicing annually at an authorized service center to keep the robot lawn mower in good working conditions.
NOTE : any malfunction due to not having carried out the annual servicing will not be recognized under warranty.

REPLACEMENT OF THE CUTTING BLADES

1. Switch off the robot lawn mower in safety conditions (see par. 1.4).
2. Turn the robot lawn mower upside down, taking care not to damage the floating cover.
3. Unscrew the fixing screws (Fig. 14. E).
4. Replace the cutting blades (Fig. 14.D).
5. Tighten the fixing screws (Fig. 14.E).

WINTER BATTERY MAINTENANCE AND STORAGE

1. Charge the battery according to the guided procedure in the App, accessible from the “Settings” page.
2. Clean the robot lawn mower (see the Complete Instruction Manual).
3. Check the robot lawn mower is switched off and stored in a dry place, protected from icy conditions.

NOTE : For more detailed information on the winter charging procedure, please refer to the Complete Instruction Manual.

NOTE : Registering the charge through the app procedure is required for the battery warranty to be valid.

BATTERY REPLACEMENT

Battery replacement is the sole responsibility of the STIGA

TECHNICAL ASSISTANCE STAFF.

If the battery needs to be replaced, contact a service centre or your retailer.

TRANSPORT, STORAGE AND DISPOSAL

TRANSPORT

NOTE : We recommend using the original packaging for transport over long distances.

1. Switch off the robot lawn mower in safety conditions (see Par. 1.4).
2. Clean the robot lawn mower (see the Complete Instruction Manual).
3. Lift the robot lawn mower by its handle (Fig. 15.D) and carry it, making sure to keep the cutting blade away from the body.

Other Figures

TROUBLESHOOTING

CAUTION:

Stop the robot lawn mower and bring it back to safety conditions (See Par. 1.4).
Below there is the list of any anomalies that may arise during the work phase.

For further details on the specific model, please consult the complete Manual available online (see QR code on the first page of this booklet).

DECLARATION OF CONFORMITY

UK DECLARATION OF CONFORMITY

UK DECLARATION OF CONFORMITY

More Information

STIGA LTD (UK Importer)

Unit 8, Bluewater Estate Plympton, Devon, PL7 4JH, England STIGA S.p.A. Via del lavoro, 6 31033 Castelfranco Veneto (TV) Italy

• stiga.com

Download full manual stiga.com

Install Stiga.GO App

Register your product now!

• stiga.com/int/product-registration

STIGA LTD (UK Importer)

• Unit 8, Bluewater Estate Plympton, Devon, PL7 4JH, England

STIGA S.p.A.

• Via del lavoro, 6
• 31033 Castelfranco Veneto (TV) Italy
• stiga.com

References

• STIGA: lawn mowers, garden tractors, brushcutters and chainsaws

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>