XiXi Technology Shenzhen CO Ltd Z08 Repeater Instructions
- June 1, 2024
- XiXi Technology Shenzhen CO Ltd
Table of Contents
XiXi Technology Shenzhen CO Ltd Z08 Repeater
Product Information
Specifications:
- Model : wifi repeater-xx
- Wireless Bands: Dual band 2.4G & 5G
- IP Address : 193.168.11.1
Product Usage Instructions
Power On and Connection Settings:
Power LED: The power indicator turns on when the device is powered on.
Signal LED: After 10 seconds of powering on, the signal indicator turns on, indicating connection settings can be made.
Repeater LED: When expansion is successful, the Repeater LED lights up.
LAN LED: Connect the network cable to the LAN port, and the LAN LED will light up when connected to the superior router.
WPS Connection:
WPS LED: Indicates WPS connection status.
Reset/WPS Button: Press and hold for 7 seconds to reset the device to factory settings. Short press for 2 seconds to activate the WPS connection.
Configuration and Setup:
- Modify the device name after expansion.
- Ensure the password matches the original router’s password.
- Configure settings until successful display configuration.
- Return to mobile/computer, select WiFi for internet access or connect via LAN port for direct internet surfing.
Administrator Login and AP Mode:
- Select a language for operation in the administrator login interface.
- Modify name and password in AP mode settings.
- Complete configuration steps for successful setup.
FAQ
- What should I do if the device does not connect to the network?
- If the device fails to connect, try resetting it by holding the Reset/WPS button for 7 seconds to restore factory settings and attempt the setup process again.
- Can I change the WiFi network name and password after setup?
- Yes, after successful expansion, you can modify the device name and ensure the password matches the original router’s password for continued usage.
PRODUCT OVERVIEW
When the machine enters the power-on state, the signal indicator light is on,use the mobile phone or computer WiFi to search and connect the Repeater- box, click the connection, then will automatically jump to the setting page(if the jump interface does not appear, you need to the WiFi connection again.If this operation is still invalid,you can manually enter the website 192.168.11.1 in the browser),After entering the administrator login interface, select the language for the next operation. The next step in relay mode is as shown in the figure.Select the thesuperior network WiFi to be extended and enter the password
After expansion, the name can be modified. The password is consistent with the original router password. Continue to the next step until the display configuration is successful. Return to the mobile phone or computer and select WiFi connection after expansion to surf the Internet,or connect the computer to surf the Internet directly through LAN port network cable
After entering the administrator login interface, select the language for the next operation.The next step in AP mode is shown in the figure.The name and password can be modified.Continue to the next step until the display configuration is successful. Return to the mobile phone or computer and extended WiFi connection to surf the Internet
FCC
The picture above shows the operation
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>