realme Buds Air 2 Neo True Wireless Earphones User Guide
- June 6, 2024
- realme
Table of Contents
realme Buds Air 2 Neo True Wireless Earphones
This guide contains important information, please read it carefully before using the product.
USE TOGETHER WITH realme LINK
- realme Link can provide more function settings for realme Buds Air 2 Neo.
- Search realme Link in the app store or scan the following QR code to download and install the realme Link APP.
TIPS FOR USE
Wear the earbuds (the schematic diagram shows the right earbud)
- Keep the earbud tips inclined downward.
- Put the earbuds into the ear canal and rotate it left and right until your ear feels comfortable.
Instructions for touch control
- Please try to use your finger pulp with a large area to touch the touch area.
- The success rate of touch recognition can be improved by properly increasing the strength of the finger pulp touch on the touch area.
PACKING LIST
Choose suitable earbud tips
According to the actual situation of your left and right ears, please try on
different sizes of earbud tips, and choose the one that suits you. The
appropriate tips will bring you better noise cancelling experience, better
music quality and more comfortable wearing experience.
PRODUCT INTRODUCTION
- Charging box
- Indicator lamp
- Multi-function key
- Type-C charging port
- Call microphone
- Earbud touch area
- Noise cancelling microphone
- Charging contact
- Back tone hole
- Front tone hole
INSTRUCTIONS FOR USE
First use
Open the cover of the charging box, put two earbuds into the charging box,
press and hold the multifunction key for 3 seconds, and when the indicator
lamp flashes in green, the earbuds will automatically enter the pairing state.
Touch “realme Buds Air 2 Neo” in the Bluetooth list to pair.
Power on
Open the cover of the charging box, and the earbuds will be turned on
automatically and reconnected to the previously paired device.
When the earbuds are automatically shut down outside the box, put them in the
charging box, close the cover of the charging box, and after it is opened
again, the earbuds will be turned on and reconnected automatically.
Shut down
Put the earbuds in the charging box, close the box cover and the earbuds will
be shut down automatically.
- If the earbuds in the pairing state fail to be connected to other device within 10 minutes, they will be turned off automatically.
- If the earbuds are beyond the effective distance of Bluetooth and fail to be reconnected within 10 minutes, they will be turned off automatically.
Pairing with a new device
Keep the earbuds in the charging box, press and hold the multifunction key for
3s, and when the indicator lamp flashes in green, the earbuds will enter the
pairing state and can be paired with a new device.
Earbud charging
After the two earbuds are put in the charging box, close the cover of the
charging box, and the earbuds will enter the charging state.
Charging of charging box
Please use the Type-C cable provided with the product for charging. If the
indicator lamp is on after the cable is inserted, it indicates that the
charging box has entered the charging state.
- The indicator lamp flashes during charging and is normally on after the product has been fully charged.
Touch functions
1. Touch twice: Play/pause music; Answer/hang up.
2. Touch three times: Next Song.
3. Press and hold for 2s:
Reject incoming call.
4. Press and hold both left and right earbuds for 2s:
Switch between the noise cancelling mode and transparency mode.
Restore factory settings
Keep the earbuds in the charging box, press and hold the multifunction key for
10s until the indicator lamp flashes in red and green alternately, and the
factory setting will be restored.
BASIC PARAMETERS
| Product name | realme Buds Air 2 Neo |
|---|---|
| Product model | RMA2008 |
| Interface of charging box | Type-C |
| Earbud endurance in music mode | Noise cancelling is disabled: About |
7H
Noise cancelling is enabled:
About 5H
Charging box based music playing endurance
| Noise cancelling is disabled: About 28H
Noise cancelling is enabled:
About 20H
Charging time| About 2H
Bluetooth version| Bluetooth 5.2
Bluetooth protocol| HFP, HSP, A2DP, AVRCP
Bluetooth code| SBC, AAC
Communication distance| ≤ 10m
Operating temperature| 0°C~45°C
Frequency| 2.4GHz~2.48GHz
Power| ≤ 10dBm
- The Earbud endurance is the endurance of AAC|
The Earbud endurance is the endurance of AAC music playing at 50% volume. The actual endurance may be different according to the use scenario. The data is from realme laboratory.
Realme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan Yubei District, Chongqing, China