Merai MF212221 Twin Over Full L-Shaped Bunk and Loft Bed Instruction Manual
- June 3, 2024
- Merai
Table of Contents
TWIN OVER FULL L-SHAPED BUNK & LOFT BED ASSEMBLY INSTRUCTIONS
ITEM : MF212221/212222/212223/212224
-
Weight Limit
220 Lbs -
Weight Limit
400 Lbs
PLEASE DO NOT RETURN PRODUCT TO THE STORE
If you have any problem or concerns,please feel free to contact our customer service department. Please send your request to the following contact details according to the platform you purchased.
Walmart Platform:
E-mail : wmcsr@comptree.net
Tell: 626-912-8886 Ext. 100
Other(Amazon,Wayfair,Homedepot,Overstock etc.). Platform:
E-mail : csr@merax.com
Tell: 626-912-8886 Ext. 100
PART LIST MF212221
1 Headboard
1PC
| 2 Headboard
1PC
| 3 Footboard
1PC
| 4 Footboard
1PC
---|---|---|---
25 Wooden shelf panel
1PC
| 26 Wooden shelf panel
1PC
| 27 Wooden shelf panel
1PC
| 28 Wooden shelf panel
1PC
HARDWARE LIST MF212221
A Bolts
1/4″*60 20PCS
| B Bolts
1/4″*35 25PCS
| C Bolts
1/4″*30 22PCS
| D Bolts
1/4″*15 30PCS
---|---|---|---
E Pipe plug
Ø42 12PCS
| F Pipe plug
20*20 3PCS
| G Allen key
4*59 1PC
PART LIST MF212222
5 Hand Rail
1PC
| 6 Hand Rail
1PC
| 7 Vertical bar
4PCS
| 11 Horizotal bar
2PCS
| 12 Horizotal bar
8PCS
| 22 Vertical bar
3PCS
---|---|---|---|---|---
PART LIST MF212223
15 Footboard
1PC
| 16 Headboard
1PC
| 17 Headboard
1PC
---|---|---
PART LIST MF212224
9 Table Frame
1PC
| 10 Guard Bar
2PCS
| 13 Slats
2PCS
| 14 Slats
10PCS
| 18 Horizotal bar
2PCS
---|---|---|---|---
8 Guard Handrail
1PC
| 19 Slats
2PCS
| 20 Slats
2PCS
| 21 Slats
8PCS
| 23 Horizotal bar
1PC
| 24 Wooden table panel
1PC
SAFETY WARNINGS AND GENERAL NOTES:
Follow the information on the warnings on the bunk bed end structure and on the carton.
Do not remove the warning label from the bed.
Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls.
The top surface of the mattress must be at least 5 (127mm) below the upper edge of the guardrail.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure the guardrail, ladder and other components are in their proper position, free from damage, and all connectors are tight.
Prohibit horseplay on or under beds. Always prohibit jumping on the bed.
Prohibit more than one person on upper bunk.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts.Contact the manufacturer or dealer for replacement parts.
Use of a night-tight may provide added safely precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk.
If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
The use of water or sleep flotation mattresses is prohibited.
Keep these instructions for future reference.
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet. Be certain all staples are out of the box before beginning assembly on the shipping carton.
STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to,
hooks, belts, and jumping ropes.
DETAIL VIEW
STEP 1 :
Following below illustration Assembly Frame # 1, 2, 3.
Using hardware #D & #E connect #1 & #2 with #7. #3 & #4 with #7. #5 with # 6
to complete Frame #1, Frame #2, Frame #3
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
E 8PCS
Ø42
| D 10PCS
1/4*15
| G 1PC
---|---|---
STEP 2 :
Following below illustration Assembly Frame #4.
Using hardware #D connect #10 with #13 & #14 to complete Frame #4.
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
D 4PCS
1/4*15
| G 1PC
---|---
STEP 3 :
Following below illustration Assembly Frame #5.
Using hardware #A & #D connect Frame #1 & Frame #2 with Frame #4 to complete
Frame #5.
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
A 8PCS
1/4*60
| D 4PCS
1/4*15
| G 1PC
---|---|---
STEP 4 :
Following below illustration Assembly Frame #6.
Using hardware #A ,# B & #D connect #8, #11 & #12 with Frame #3, Frame #5 to
complete Frame #6.
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
A 4PCS
1/4*60
| B 16PCS
1/4*35
| G 1PC
| D 4PCS
1/4*15
---|---|---|---
STEP 5 :
Following below illustration Assembly Frame #7.
Using hardware # B connect #9 with Frame #6 to complete Frame #7.
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
B 4PCS
1/4*35
| G 1PC
---|---
STEP 6 :
Following below illustration Assembly Frame #8.
Using hardware # C connect #24, #25, #26, #27, #28 with Frame #7 to complete
Frame #8.
NOTE: Tighten all step before using.
Thank you
C 22PCS
1/4*30
| G 1PC
---|---
STEP 7 :
Following below illustration Assembly Frame #9, #10.
Using hardware #E connect #15 & #16 with #17 to complete Frame #9, Frame #10.
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
E 4PCS
Ø42
STEP 8 :
Following below illustration Assembly Frame #11.
Using hardware #D connect #18 with #19, #20, #21 to complete Frame #11.
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
D 8PCS
1/4*15
| G 1PC
---|---
STEP 9 :
Following below illustration Assembly Frame #12.
Using hardware #A connect Frame #9 & Frame #10 with Frame #11 to complete
Frame #12.
NOTE: In this step, DO NOT tighten any bolt until you connect all part together
A 8PCS
1/4*60
| G 1PC
---|---
STEP 10 :
Following below illustration Assembly Frame #14.
Using hardware #B, #F connect Frame #12 with Frame #13 to complete Frame #14.
NOTE: Tighten all step before using.
Thank you
F 3PCS
20*20
| G 1PC
| B 5PCS
1/4*35
---|---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>