Miliwave Co Ltd MWC-936 5G NR-U Wireless Bridge User Manual

Miliwave Co Ltd MWC-936 5G NR-U Wireless Bridge User Manual

Product Information

Specifications

• SOC:  Dual core ARMv7 Cortex-A9
• PoE : Passive PoE (Typ 48V)
• Operating Frequency:  802.11 ad – CH1, CH2, CH3, CH4, CH5, CH6 (57.24GHz ~ 70.20GHz)
• Transmit Power (max.):  38 dBm @ MCS1 (ANT Beamforming Index 3)
• Input Voltage:  Voltage: 24V(typ), Current: 1000mA
• Power Consumption:  Not specified
• Operating Temperature:  Not specified
• Storage Temperature:  Not specified
• Operating Humidity:  Not specified
• Storage Humidity:  Not specified
• Volume (L x W x H):  200 x 220 x 57 mm
• Weight:  Typical 1.2kg
• Input / Output Port:
• 24V DC port(2-pin) x1
• SFP x1
• RJ45 2.5 GbE x1

Product Usage Instructions

1. Introduction
   Overview
   The MWC-915 5G NR-U Wireless Bridge uses the 60GHz radio frequency band to form a wireless bridge with a transmission rate of 2Gbps in both directions. It supports IEEE 802.11ad Standard and can use Ch1~Ch6. It has an SFP port supporting either 1Gbps or 2.5Gbps and one 2.5 Giga Ethernet LAN port interface. And Passive PoE operation using LAN port is possible. (Type 48V) Please refer to http://www.miliwave.co.kr/ for more information.

2. Abbreviations and Acronym Definitions
   Acronym Definitions:

   •   *  **Gbps:**  Giga bits per second

   • GHz:  Giga Hertz
   • • IEEE:  Institute of Electrical and Electronics Engineers
   • LED:  Light Emitting Diode
   • • LoS:  Line-of-sight
   • Mbps:  Mega bits per second
   • • MCS:  Modulation and Coding Scheme
   • MHz:  Mega Hertz
   • • PTMP:  Point-to-multipoint Communication
   • QAM:  Quadrature amplitude modulation

Web UI user guide
Login

1. Open your web browser, then go to https://192.168.1.1.

2. Enter the device login username and password.
   The default username and password are as follows:

   • Username : admin
   • Password : admin

3. Your device’s home page (or dashboard) should be displayed.

4. Device Overall Status
   No information provided in the user manual.

5. Wireless Status No information provided in the user manual.

6. Password Change
   No information provided in the user manual.

7. IP Network Settings
   No information provided in the user manual.

8. Wireless Setting
   No information provided in the user manual.

9. Installation
   The MWC-915 is installed with power supply through 24VDC. It also supports Passive PoE (Typ 48V) function.

FAQ
No frequently asked questions provided in the user manual.

MWC-915 User Manual

• 5G NR-U Wireless Bridge
• Rev. 1.1 2023-07-12

Revision History

• Address: Room 504, 106-40 Gwahakdnji-ro, Gangneung-si, Gangwon-do.  25440 KOREA.
• http://www.miliwave.co.kr/
• Tel. 070-8825-0630
• Fax.
• Email:  sales@miliwave.co.kr
• Copyright © Miliwave Inc. 2020. All rights reserved.
• No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Miliwave Co., Ltd. All specification supplied herein are  subject to change without notice at any time.

introduction

Overview

• The MWC-915 5G NR-U Wireless Bridge uses the 60GHz radio frequency band to form a wireless bridge with a transmission rate of 2Gbps in both directions.
• It supports IEEE 802.11ad Standard and can use Ch1~Ch6.
• It has an SFP port supporting either 1Gbps or 2.5Gbps and one 2.5 Giga Ethernet LAN port interface. And Passive PoE operation using LAN port is possible. (Type 48V)

For more information, please contact your Miliwave (sales@miliwave.co.kr)

Abbreviations and Acronym Definitions

Technical Specifications

57.24GHz ~ 70.20GHz
Transmit Power(max.)| 38 dBm @ MCS1 (ANT Beamforming Index 3)
Input Voltage| Voltage: 24V(typ), Current: 1000mA
Power Consumption| Data Transfer mode: Typical 20W ( at Max. Power )
Operating Temperature| -30ºC ~ +70ºC
Storage Temperature| 10℃～＋40℃
Operating Humidity| 5%~95%
Storage Humidity| 5%~95%
Volume (L x W x H)| 200 x 220 x 57 mm
색상| Ivory
Weight| Typical 1.2kg
**** Input / Output Port| RJ45 2.5 GbE x1 SFP x124V DC port(2-pin) x1

Web UI user guide
Login

1. Open your web browser, then go to https://192.168.1.1.

2. Enter the device login username and password.
   The default username and password are as follows: Username: admin
   Password : admin
   

3. .Your device’s home page (or dashboard) should be displayed.
   

4. Device Overall Status
   

5. Wireless Status
   

6. Password Change
   

7. IP Network Settings
   

8.  Wireless Setting
   

 Installation

It is installed with power supply through 24VDC. And the Passive PoE(Typ 48V) function supported.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The device must be installed such that a minimum separation distance of at least 25.15 cm is maintained between the radiator (antenna) and all persons at all times.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Read More About This Manual & Download PDF:

References

• miliwave.co.kr

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>