OPPSDECOR KF-01P Weight Lifting Bench Instruction Manual
- June 1, 2024
- OPPSDECOR
Table of Contents
OPPSDECOR KF-01P Weight Lifting Bench
WEIGHT LIFTING BENCH MANUAL
The Specifications of this product may vary from this photo, subject to change
with our notice
NOTICE!
- Please retain these instructions for future reference.
- Please do not exceed the weight limitations of this item.
- Maximum Weight for users: lbs/ kgs.
- Do not stand on or use any part of this item as a step ladder.
- Firmly secure all bolts, screws, and knobs before use.
- Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled.
- Be aware that some parts are heavy and have sharp edges.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
PARTS
HARDWARE
PRODUCT ASSEMBLY
-
Step1: Attach part H bench support to part D bench leg with two part 12 carriage bolts and two part 13 nuts.
-
Step2: Attach the bench leg to part A bench with a part 2 bolt, part 14 washer, and part 13 nut. Insert the part 16 pin.
-
Step3: Attach part F round support with two part 1 bolts, two part 14 washers, and two part 13 nuts.
-
Step4: Attach two part C side legs to two part B side frames with four part 5 carriage bolts, four part 10 washers, and four part 3 nuts.
- Insert two part Kipper side frames and secure them with two part 11 pins.
-
Step 5 : Attach the round support to the side frames with two part 9 screws and two part 14 washers.
-
Attach part E square support with four part 4 bolts, four part 10 washers, and four part 3 nuts.
-
Step 6: Secure two part G brackets with two part 11 pins.
Attach two part J arms with two part 9 screws and two part 14 washers .
-
Step7: Secure two part L ropes to the bench leg.
FEATURES
- Flip up the long bench to transform into an incline bench and secure with part 15 pin.
- Flip out the bench leg to transform into an decline bench.
- Fold bench to store; flip up bench and bench leg and secure with part 15 and part 16 Dins.
