DanForce HL-690 USB Rechargeable Headlamp User Manual
- June 1, 2024
- DanForce
Table of Contents
DanForce HL-690 USB Rechargeable Headlamp
Specications
LUMENS
|
Hight Mode
6000Im
|
Low Mode
2000Im
---|---|---
DISTANCE| 1000 feet| 400 feet
BURNTIME
WEIGHT
| 9 hours
330g
| 12 hours
WARNINGS
- AVOID EYE INJURY – Do not stare directly into the beam or point it directly into anyone’s face. Doing so for more than a few seconds could cause retinal damage.
- Not recommended for use by children under fourteen years of age.
- Any battery may leak harmful chemicals which may damage skin, clothing, or the inside of the headlamp.
- TO AVOID RISK OF INJURY, DO NOT LET ANY MATERIAL LEAKED FROM A BATTERY COME IN CONTACT WITH EYES OR SKIN.
- Any battery may rupture or explode if put in a fire or otherwise exposed to excessive heat.
- TO AVOID RISK OF INJURY, DO NOT EXPOSE BATTERIES TO EXCESSIVE HEAT.
- To reduce the risk of personal injury or harm to your headlamp, take the following precautions:
- Use only 18650 lithium batteries from a reputable manufacturer. Do not use different brands of batteries in the same headlamp When replacing batteries, always replace the whole set. Do not try to recharge batteries that are not specifically designed to be recharged.
Warning: batteries must be inserted correctly. Failure to do so could cause permanent damage to the LED module. Follow the battery manufacturer’s instructions as to proper handling, storage, and disposal of batteries.
Carefully follow the steps listed under INSPECTION AND MAINTENANCE.
INSTRUCTIONS
BATTERY
- Use 18650 3.7v lithium ion 2200mah. Do not mix old and new batteries or different battery types.
- Dispose of used batteries properly. Remove batteries during storage and transport.
CHARGING
Before the first use, please fully charge the headlamp. Charging for the first time takes up to 5 hours. Let it charge until the red light on the charger becomes green.
- Open the battery case, and insert the batteries by the drawing.
- Plug the charging cable into the charging slot. Normal Charging time: 4-7 hours.
HEADLAMP ADJUSTMENT
Place the headlamp on your head with the lights forward. The center of the headlamp base should be in the middle of your forehead. The battery case position should be at the height of your ears and between them.
- With the upper adjustment clip, adjust the strap to your foot height. (Move the clip towards the flashlight to enlarge, move to batteries to make it smaller).
- With the side adjustment clip, adjust the strap to your head wide. (Move the clip toward the headlamp to smaller, move to the batteries to enlarge).
4 LIGHT MODES
Press the main button to turn on and switch modes.
THE FOCUS SYSTEM
- The focus system allows to expansion of the flood of the headlamp.
- The focus in the headlamps is rotatable; it means you have to rotate the head of the headlamp in order to adjust it.
- Rotate clockwise to increase the beam.
- Rotate counterclockwise to reduce the beam.
CHANGING THE ANGLE OF THE HEADLAMP
The headlamp can be easily rotated down to 90°. The head will stay in the chosen angle.
FEATURES
- LED Headlamp of Superior Quality The DanForce HL-690 USB Rechargeable Headlamp provides illumination of superior quality, boasting a brightness of 1080 lumens.
- Because it is designed to withstand water splashes and dust, the IPX45 Water and Dust Resistance rating makes it suited for use in outdoor activities that take place in a variety of weather situations.
- Multiple Light Modes: This product supports four different light modes, including high, low, medium, and strobe, making it versatile enough to be used in a variety of settings and situations.
- Red Light Headlamp: This type of headlamp comes with a supplementary red light feature, making it an excellent choice for maintaining night vision for activities such as hunting, camping, or operational use.
- A Headlamp with an Adjustable Head that Can Be Rotated 90 Degrees The headlamp has a head that can be rotated 90 degrees, which enables users to modify the angle of the light beam to suit their specific requirements.
- Equipped with a zoomable focus, this device offers the highest possible level of lighting precision, making it an ideal choice for activities that call for concentrated forms of illumination.
- Versatile design that allows for a variety of outdoor activities, including camping, hiking, fishing, hunting, and tactical use, is what we mean when we talk about multi-functional gear.
- Compatibility with Hard Hat Lights: This light is designed to perform flawlessly as a hard hat light, allowing for hands-free illumination for work in low-light or dark environments.
- Made-to-Order Comfort: Designed to provide the highest possible level of comfort, featuring a sweat-resistant headband and adjustable size, which ensures a perfect fit for each individual user.
- All-Weather Ready: Constructed to withstand harsh weather conditions, such as heat, cold, dust, ice, and water, for the purpose of providing the highest possible level of reliability.
- Enhanced longevity and dependability of the headlamp are achieved by the utilization of air-tight rubber sealing, which shields the rechargeable battery from dust, ice, and water.
- An updated rechargeable battery with a capacity of 5000 milliampere-hours (mAh) is included in this product. This battery increases the amount of time that it can be used, making it suitable for use during outdoor activities.
- USB Rechargeable: Capable of being easily recharged through the use of a USB cable, thereby removing the requirement for using throwaway batteries and providing the ease of charging while on the move.
- Accessories that are included include a carry bag and a carabiner, which make it simple to transport and store the item, thus increasing its portability when used for activities that take place outside.
- The confidence of the manufacturer is backed by the assurance that comes with becoming a member of the DanForce family, which guarantees high-quality performance and complete customer satisfaction.
SETUP GUIDE
- Please remove the DanForce HL-690 USB Rechargeable Headlamp and any accessories that are included in the package after you have opened the box.
- Charge the rechargeable battery that comes with the headlamp by using the USB cable that is provided. It is important to make sure that the battery is fully charged before beginning use.
- Make sure that the headlamp’s headband is adjusted so that it securely fits on your head or helmet.
- While the headlamp is mounted on your head, use the 90-degree adjustable head function to make any necessary adjustments to the angle of the light beam for your specific needs.
- After activating the headlamp by pressing the power button, you should then cycle through the various light modes in order to become comfortable with the functions that are available.
- You can modify the strength of the light beam and the spread of the beam according to your preferences by using the zoomable focus option at your disposal.
- In the event that you are going to use the headlamp for work reasons, make sure that it is attached to a hard hat in a secure manner and that it does not compromise your vision.
- You can use the headlamp for a variety of activities, making sure to select the proper light mode and focus for the activity you are performing.
- As a means of conserving battery power and extending the headlamp’s lifespan, it should be turned off when it is not being used.
- If you want to keep the headlamp and its attachments safe and make transit easier, you may put them in the carry case that is provided.
- Keep the USB cord close at hand so that you can recharge the light whenever it is required, particularly when you are out on an expedition.
- To guarantee that the operation is not interrupted, it is important to regularly check the battery level and recharge it as required.
- If you want to prevent the internal components of the headlamp from being damaged, you should avoid exposing it to excessive temperatures or dampness.
- Using a gentle, wet cloth, clean the headlamp on a regular basis to eliminate dirt, dust, and debris, so ensuring that it continues to function at its highest level.
CARE & MAINTENANCE
- You should perform routine checks on the headlamp to look for any indications of damage or wear, such as cracks, loose parts, or frayed wires, and then either repair or replace it as required.
- The lens and body of the headlamp should be cleaned on a regular basis with a gentle, wet cloth to remove debris, dust, and residue. This will ensure that the illumination is both clear and effective.
- Because harsh chemicals, solvents, or abrasive materials have the potential to damage the surface or internal components of the headlamp, it is important to avoid exposing it to these substances.
- When the headlamp is not being used, it should be stored in a cool, dry place that is away from direct sunlight and severe temperatures. This will help to avoid damage and extend the headlamp’s lifespan.
- Make sure that the battery of the headlamp is completely charged before putting it away for a lengthy period of time. This will help to preserve its functionality and prevent any degeneration.
- Maintaining a clean and dry USB charging port on the headlamp is essential for preventing corrosion and ensuring that the charging function is functioning correctly.
- It is important to avoid overcharging the battery of the headlamp because doing so might damage its performance and limit its lifespan. The USB cable should be disconnected once the battery has reached its full charge.
- The headlamp should not be disassembled or modified in any way since doing so could potentially void the warranty and pose a risk to the user’s safety.
- Maintaining the headlamp’s resistance to water and dust requires that the seals and gaskets be inspected on a regular basis for any signs of wear or damage, and if necessary, they should be replaced.
- Children and animals should not have access to the headlamp in order to avoid the possibility of unintentional damage or ingesting of small pieces.
- Before using the headlamp, make sure it is completely dry in the case that it becomes wet. This will avoid water damage to the internal components.
- The headlamp should not be dropped or subjected to impacts because doing so might potentially cause damage to the housing or the electronics that are contained within it.
- Make sure the headlamp is functioning properly and producing the desired amount of light by testing it on a frequent basis, especially before going outside to engage in activities.
FREQUENTLY ASKED QUESTIONS
What is the brand of the HL-690 USB Rechargeable Headlamp?
The brand of the HL-690 USB Rechargeable Headlamp is DanForce.
What is the brightness level of the DanForce HL-690 USB Rechargeable Headlamp?
The brightness level of the DanForce HL-690 USB Rechargeable Headlamp is 1080 lumens.
What is the weight of the DanForce HL-690 USB Rechargeable Headlamp?
The DanForce HL-690 USB Rechargeable Headlamp weighs 8.8 ounces.
What is the model number of the DanForce HL-690 USB Rechargeable Headlamp?
The model number of the DanForce HL-690 USB Rechargeable Headlamp is HL690.
How many batteries are required for the DanForce HL-690 USB Rechargeable Headlamp?
The DanForce HL-690 USB Rechargeable Headlamp requires 2 lithium-ion batteries.
What are some special features of the DanForce HL-690 USB Rechargeable Headlamp?
Special features of the DanForce HL-690 USB Rechargeable Headlamp include long range, high power, secondary red light, adjustable strap, and being rechargeable.
What is the warranty description for the DanForce HL-690 USB Rechargeable Headlamp?
The warranty description for the DanForce HL-690 USB Rechargeable Headlamp is 90 days from the day of purchase.
What is the price of the DanForce HL-690 USB Rechargeable Headlamp?
The price of the DanForce HL-690 USB Rechargeable Headlamp is $35.97.
What is the power source for the DanForce HL-690 USB Rechargeable Headlamp?
The power source for the DanForce HL-690 USB Rechargeable Headlamp is battery powered.
What type of light source does the DanForce HL-690 USB Rechargeable Headlamp use?
The DanForce HL-690 USB Rechargeable Headlamp uses LED as the light source type.
What are the dimensions of the DanForce HL-690 USB Rechargeable Headlamp?
The dimensions of the DanForce HL-690 USB Rechargeable Headlamp are 3.5 inches in diameter, 0.4 inches in width, and 3 inches in height.
What is the composition of the batteries used in the DanForce HL-690 USB Rechargeable Headlamp?
The batteries used in the DanForce HL-690 USB Rechargeable Headlamp are lithium-ion.
What is the water resistance level of the DanForce HL-690 USB Rechargeable Headlamp?
The water resistance level of the DanForce HL-690 USB Rechargeable Headlamp is water-resistant.
Does the DanForce HL-690 USB Rechargeable Headlamp offer a secondary red light?
Yes, the DanForce HL-690 USB Rechargeable Headlamp offers a secondary red light.
Can the DanForce HL-690 USB Rechargeable Headlamp be recharged via USB?
Yes, the DanForce HL-690 USB Rechargeable Headlamp can be recharged via USB.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK: DanForce HL-690 USB Rechargeable Headlamp User Manual