Smart Bidet B01 SERIES Smart Toilet Seat Instruction Manual

Smart Bidet B01 SERIES Smart Toilet Seat

Product Information

• Specifications
  • Rated voltage and rated frequency: 110V~ 60Hz
  • Length of wire: Not specified
  • Water yield: Not specified
  • Posterior cleaning: Yes
  • Feminine cleaning: Yes
  • Washing equipment: Smart Toilet Seat

The B01 SERIES Smart Toilet Seat is designed to provide enhanced hygiene and comfort during toilet use. It includes various features such as posterior and feminine cleaning functions, remote control operation, and safety precautions to ensure user well-being. The components included with the product are the Smart Toilet Seat itself, a remote control, remote control holder, fast mounting plate, adjustment sheets, expansion screws, adhesive tape, user’s manual, inlet hose, and T-junction component.

Product Usage Instructions

• Safety Precautions
  • Before using the Smart Toilet Seat, it is essential to follow these safety precautions:
  • Read the user manual carefully before installation.
  • Stop using the product immediately if you observe smoke, unusual sounds, odour, leakage, breakage, or damage.
  • Avoid using heavy chemical cleaning agents on the bidet.
  • Ensure proper ventilation in the installation area to prevent electrical shock or fire.
  • Disconnect the power supply before cleaning or removing the product.
  • Keep the product away from direct sunlight.
  • Do not expose the product to industrial or sewage water.
  • Supervise individuals with special health conditions or disabilities when using the product.
  • Ensure all electrical cords and plugs are waterproof and installed correctly.
• Installation
  • Follow these steps for installing the Smart Toilet Seat:
  • Refer to the user manual for detailed installation instructions.
  • Ensure the product is placed in a well-ventilated area.
  • Use the included components for mounting and connection.
  • Connect the inlet hose and T-junction as per the manual.
  • Secure the remote control holder in a convenient location near the toilet.
• Operation
  • To use the Smart Toilet Seat:
  • Sit on the toilet seat and adjust your position if needed.
  • Use the remote control to activate the desired cleaning function (posterior or feminine).
  • Adjust water pressure and temperature as per your preference.
  • After use, clean and dry the seat as recommended in the user manual.

FAQs

• Q: Can children use this product unsupervised?
  • A: No, children must have adult supervision when using the Smart Toilet Seat to prevent any accidents or misuse.
• Q: What should I do if I notice an unusual sound while using the product?
  • A: Immediately stop using the product and refer to the troubleshooting section in the user manual for guidance. Do not continue use under such conditions.

Safety precautions

• To prevent damage to the unit and possible injury to users, please follow the safety warnings.
• Please be sure to carefully read through the user’s manual before installation.
• Keep the user’s manual after installation to refer to for troubleshooting advice.

Symbols and meanings

WARNING: This could  result in serious injury or death.

The following symbols are used to indicate important safety precautions when using the product.

WARNING

• Prohibited
  • Stop using the product immediately if you observe: Smoke
  • Unusual sound or odour
  • Leakage, breakage or other damage
  • Blocked toilet pan
  • Continued use under these conditions could cause electrical shock, injury, or water leakage.
  • Do not clean the smart bidet with heavy chemical cleaning agents such as paint thinner, gasoline, putty powder, nylon brush, etc. Otherwise, it could trigger a chemical reaction, cause leakage, damage to the product or personal injury.
  • A loose electrical connection could cause an electric shock or a fire.
  • Do not operate the product or handle the plug with wet hands. This may result in electrical shock or a fire.
  • Handling the plug during thunderstorms and lightning may cause electrical shock.
  • Make certain to use the proper voltage. Overloading circuits could overheat and cause a fire.
  • Do not pour liquids onto the electrical components while it is plugged in as this could result in electrical shock or a fire.
  • Do not stand or place heavy objects on the product, as it can cause damage.
  • Do not attempt to disassemble or repair this product yourself. It needs to be taken for professional repair. Otherwise, it may result in damage to the product.
  • If the electrical plug or line is damaged, unplug the product. Do not attempt to fix the outlet and consult a professional.
  • Do not block the air openings of the product. Keep the air openings free of lint, hair, and the like.
  • Do not use it while bathing.
• Caution
  • Make sure the product is installed in a well-ventilated area. Excess humidity and moisture could cause electrical shock or fire.
  • Disconnect the power supply before removing this product from the toilet to prevent electrical shock or fire.
  • To prevent electrical shock or fire, disconnect the power supply before cleaning the product and do not apply water directly to it.
  • Do no expose the product to direct sunlight.
  • Persons with special health conditions should only use this product with the permission of their doctor. In some instances, supervision or assistance may be necessary when using the product.
  • Do not use industrial water, wastewater, seawater, reclaimed water and other sewage water. This could cause skin inflammation or other conditions.
  • Persons (including children) with physical, perceptual, intellectual disabilities or other conditions, need to use the product under the guidance or supervision of someone else, or they may experience electric shock, injury or fire.
  • All electrical cords and plugs must be waterproof.
  • The electrical plug must be located more than 0.5m above the floor and away from the bathtub and shower. Otherwise, it could cause electrical shock or a fire.
  • When replacing an existing bidet toilet seat, remove the old hose assemblies and replace them with the included hose assemblies. Do not reuse the old hose assemblies to avoid safety-related problems.
  • Do not allow children to play with this product. Children must have adult supervision when using the product.
  • The grounding wire must conform to local codes and must use a three-pronged grounding plug for use.

Components

Specifications

0.7L/min(hydraulic pressure of 0.2Mpa)
Feminine cleaning
Swing cleaning| Swing cleaning back and forth
Massage cleaning| Interval cleaning. Powerful cleaning
The adjustment of the water gear and nozzle place| 5 settings
Effluent-water temperature range| About 35°C – 42°C / 95°F – 107.6°F（Top Gear）
Safety device| Prevents the circuit from overheating Temperature control switch & Temperature fuse
Drying device| Drying temperature control| About 32°C – 57°CF / 89.6°F – 134.6°F（Top Gear）
Safety device| Temperature control switch & Temperature fuse
Seat cover| Temperature range| About 30°C – 42°C / 86°F – 107.6°F（3 settings）
Soft-close control for seat

cover

| Damper device
Safety device| Temperature sensor & Temperature control switch & Temperature fuse
Self-cleaning| Antibacterial seat cover/ nozzle| Made from anti-bacteria plastic
Self-cleaning nozzle| Self-cleaning
Deodorization| Odor control| Activated carbon deodorant
Rated power| 980W| Maximum power| 1600W| Waterproofing

grade

| IPX4
Temperature of water supply| 4°C – 35°C / 39.2°F – 95°F| Ambient temperature| 3°C – 40°C / 37.4°F – 104°F
Water pressure| 0.07MPa（Dynamic）~0.75MPa（Static）

1. Rated power： Water pressure is 0.18MPa + 0.02MPa under an ambient temperature of 23°C±2°C (73.4°F±35.6°F), and the condition of 15℃±0.5℃ (59°F±32.9°F) water-inflow temperature. Increase the water quantity, the seat temperature and the water temperature, to start the posterior cleaning on the average setting.
2. Maximum power： Water pressure is 0.18MPa+0.02MPa under an ambient temperature of 23°C±2°C (73.4°F±35.6°F), and the condition of 5°C±1°C (41°F±33.8°F) water-inflow temperature. Increase the water quantity, the seat temperature and the water temperature, in turn, to start the feminine cleaning on the average setting.

Product Diagram

The power outlet and the water inflow connection (Caution)

• If the power cord is not long enough, please do not use an extension cord.
• Only for reference. Bathroom sizes and configurations may vary.

Product Functions

Cleansing functions

cleaned
Water flow adjusting| Adjusts water flow
Massage cleaning| Variable intensity of the water spray for massaging action
Swing cleaning| Swings back and forth to cleanse most area

Comfort functions

drying
Deodorization| Auto-deodorizes after the user is seated
Seat sensor| Enables cleaning functions after the user is seated
Soft close function| Soft-close toilet seat and lid
LED night light| The on-and-off sensor adjusts brightness
Prevent low

temperature scald

| The seat temperature will automatically decrease after the user is

seated for 15 min.

Cleaning functions

cleaner

Functions may not be the same for all models.

Installation

【TIps】

1. Put expansion nuts into installation holes
2. Put fast-install baseboard on installation holes
3. Put adjustable sliding vane on the fast-install baseboard
4. Fix adjustable sliding vane and baseboard to ceramic body through expansion screws.

Put the cover seat in the direction of the fast-install baseboard, and push the cover seat as the arrow shows. The seat is properly installed after a “click” sound.

Tips for installation of fast baseboard

1. Install the baseboard and cover seat slightly loosened to adjust the position.
2. Take out the cover seat after pressing the button again.
3. Fix the baseboard, then install the cover seat.
4. Press the arrow to indicate the fixed power line

Connection Instructions

Water supply connection instructions

Note: Turn off the shutoff valve and drain the water tank before removing the valves to prevent water spillage.

1. Connect the T-connector to the toilet inlet valve.
2. Connect the included braided hose to the product.
3. Connect the original hose to the T-connector.
4. Connect the original hose to the inlet valve.

WARM PROMPT

• This product has been tested with water.
• It is normal if a small amount of water drips out of the product when it is removed from the packaging.

Components

Remote Control Functions

• Stop
  • Press the button; turns all functions off.
  • Atmosphere light will be turned off or on by holding the“stop” button more than 2 sec. (Some models do not have this function).
• Posterior cleaning
  • Press the button; the posterior cleaning function will start after a beep. The function turns off after 2 min. or by pressing the stop button.
  • The function will stop if the user leaves.
• Feminine cleaning
  • Press the button; the bidet function will start after a beep. The function turns off after 2 min. or by pressing the stop button.
  • The function will stop if the user leaves.
• Drying
  • Press the button; the drying function will start after a beep. The function automatically turns off after 2 min. or by pressing the stop button.
  • The function will stop if the user leaves.
• Massage
  • During Posterior/Feminine Cleaning Mode, press the “Massage” button. The function will start after a beep.
  • Interval massage mode： The nozzle sprays with varying pressure.
  • Powerful massage mode： The nozzle sprays pressurized water.
  • Remark： The massage cycle order is interval massage > powerful massage > regular cleaning.
• Swing
  • During Posterior/Feminine Cleaning Mode, press the “Swing” button. The function will start after a beep. During the swing function, the nozzle will oscillate back and forth. Press the “swing” button again to stop the swing function. Pressing the “stop” button will stop all cleaning functions.
• Water temperature setting
  • There are 5 settings. When the rear mode or bidet mode is turned on, the starting position is the third setting.
  • Press the “+” button to increase the water temperature.
  • Press the “-” button to decrease the water temperature. The indicator light corresponds to the setting.
• Dryer temperature setting
  • There are 5 settings. When the rear mode or bidet mode is turned on, the starting position is the third setting.
  • Press the “+” button to increase the dryer temperature.
  • Press the “-” button to decrease the dryer temperature. The indicator light corresponds to the setting.
• Spray position setting
  • There are 5 settings. When the rear mode or bidet mode is turned on, the starting position is the third setting.
  • Press the “+” button to move the nozzle forward.
  • Press the “-” button to move the nozzle backwards. The indicator light corresponds to the setting.
• Adjust water flow
  • There are 5 settings. When the rear mode or bidet mode is turned on, the starting position is the third setting.
  • Press the “+” button to increase water intensity.
  • Press the “-” button to decrease water intensity. The indicator light corresponds to the setting.
• Adjust seat temperature
  • There are 3 settings. When the rear mode or bidet mode is turned on, the starting position is the second setting.
  • Press the “+” button to increase seat temperature.
  • Press the “-” button to decrease seat temperature. The indicator light corresponds to the setting.

Note

• Adjust the seat temperature to room temperature or low temperature.
• To prevent scalding, the seat temperature will automatically decrease after 15 min. of use.

Side push button instructions

Posterior & Feminine cleaning function instructions:

• Function 1： Press the Posterior/Feminine cleaning button to start the rear and front cleaning.
• Function 2： When the posterior cleaning or feminine cleaning function is on, press the button again to stop cleaning.
• Function 3： Hold the Posterior/Feminine cleaning button for approximately 2 seconds to start the function.
• The cycle will consist: of swing Posterior/Feminine cleaning for 30 sec.; massage function for 60 sec.; and drying for 2 min.

Note: For faster access to swing or massage mode, the remote control can be used. Press the posterior cleaning button for more than 5 sec. to turn off/on the LED.

Dry function instructions：

• Function 1： Press the Dry button to start the drying function.
• Function 2： Press the button again to stop the drying function.

Push button function instruction：

• Function 1 Under posterior/feminine cleaning mode, slide the side button to adjust the position of the nozzle. (Total of 5 settings. The default is the third gear.)
• Function 2 Under posterior/feminine cleaning mode, slide the side button to adjust the volume of water. (Total of 5 settings. The default is the third gear.)
• Remark： To switch between the above two functions, hold the dry button for approximately 2 seconds. The switch is complete after a beep.
• Function 3 Under the dry mode, slide the side button to adjust the temperature (Total of 5 settings. Default is the third setting) If the beep sounds twice， it means that the cycle is complete.

Remote control installation instructions

• Method 1

1. Install the remote control fixing panel with a magnet on the remote control fixed seat and lock tightly.
  *  **Note：** Pay attention to the polarity when installing the magnet. Place the larger side of the magnet hole outside the fixed panel, and enclose the small hole surface inside the fixed panel, as shown in FIGURE 1 below.
2. Put the double sided tape on the remote control fixed seat.
3. Clean dust, grease, and water droplets on the walls and wipe them clean.
4. Press the remote control fixed seat with double-sided tape on it. Press it evenly for 3 to 5 min. Attach the remote control fixed seat to the wall.
  *  **Note：** The method applies to glazed tiles, glass and smooth walls.![Smart-Bidet-B01-SERIES-Smart-Toilet-Seat-FIG-1 \(25\)](https://manuals.plus/wp-content/uploads/2024/04/Smart-Bidet-B01-SERIES-Smart-Toilet-Seat-FIG-1-25.png)

• Method 2

1. Drill a hole of 46mm~52mm(1.81in~2.05in) length and 22mm(0.86in) depth on the wall with a 6mm(0.24in) diameter drill. Have a user sit on the seat to check the position of the hole in the wall. The user should be able to access the remote control while seated.
2. After installing the expansion plug in the wall, align the fixing hole of the remote control at the expansion plug and then lock the bolt. Install the remote control fixing panel with a magnet on the remote control fixed seat and lock tightly.
  *  **Note：** Pay attention to the polarity when installing the magnet. Place the larger side of the magnet hole outside the fixed panel, and enclose the small hole surface inside the fixed panel, as shown in Figure 2.![Smart-Bidet-B01-SERIES-Smart-Toilet-Seat-FIG-1 \(26\)](https://manuals.plus/wp-content/uploads/2024/04/Smart-Bidet-B01-SERIES-Smart-Toilet-Seat-FIG-1-26.png)
  * Put the remote control on the fixed base after installing the battery, and the remote control will affix to the base automatically.
  *  **Note：**
    * Place the remote control on its base when not in use.
    * The remote control falling can damage it.
    * Do not spill water on the remote control or drop it in water.

Removal & Maintenance

1. Unplug the product and turn off the shutoff valve. Remove the braided hose and drain excess water.
2. Press the water outflow button to drain water out of the toilet.
3. Press the fast-install button. Remove the cover seat from the toilet.

WARM PROMPT

• Please check and test before using the product again.

Cleaning

1. Close the water shutoff valve.
2. Unplug the product and unscrew the braided hose.
3. Press the quick installation button and take off the seat cover.
4. Wipe the seat cover with a sponge or a smooth cloth. Only use natural cleaning substances.
5. Install the seat cover.

Cleaning the water filter

Nozzle cleaning

1. Press the Posterior and Bidet Buttons simultaneously for approximately 2 seconds for the nozzle to extend out. Remove the nozzle
2. Scrub the nozzle and spray rod with a toothbrush, sponge, or smooth cloth with soap or mild detergent.
3. After reattaching the nozzle, press the Stop, Posterior, or Bidet Button for approximately 2 seconds. The nozzle will automatically retract into the product.

WARM PROMPT

• Do not use hydrogen chloride cleaning agents, diluents, pesticides and other non-organic detergents to clean the product， and do not use sandpaper or rough cloth to scrub it.

Common Troubleshooting

button and wait for the water supply
Please open the water-inflow valve if it is closed
Please clean or replace the filter (optional feature) device if it is blocked
The seating sensor does not recognize that someone is on the product| Please sit in a manner that covers the sensor
The cleaning stops suddenly| After a mode is selected, the product goes through its selected mode for 2 min. before automatically stopping.| This is the correct operation. To continue cleaning, select a new mode
The nozzle stops suddenly| If the user moves too fast or leaves the seat, the seat sensor cannot detect the motion.| Ensure that the seat sensor is covered and continue
Low water pressure when posterior cleaning or feminine cleaning| Filter (optional feature) may be blocked| Clean the filter screen or replace the filter
The water-inflow hose may be leaking| Check the hose and tighten it
Deodorizer does not activate| The seating sensor does not recognize that someone is on the product| Please sit in a manner that covers the sensor
Activated carbon filter(optional feature) block or spacer may be blocked| Remove the deodorizing window to clean or replace the carbon filter
The deodorant function continues to work after a user leaves| The deodorant function will continue to work for 20 sec. to remove the residual odour after the user leaves| This is the correct operation
The toilet seat can’t be heated| The seating sensor does not recognize that someone is on the product| Please sit in a manner that covers the sensor
The seat temperature is set lower than desired| Adjust the seat temperature with the remote control
Cold water for posterior cleaning and feminine cleaning| The water temperature is set lower than desired| Adjust the water temperature with the remote control
The drying temperature is not high enough| The dryer temperature is set lower than desired| Adjust the drying temperature with the remote control

Troubleshooting and alarm maintenance

the power supply immediately and stop using the product， then contact the local dealer or call the service hotline.
If the power light flashes 2 times as it lights for 2 sec.| The outlet water temperature sensor is faulty or there is a broken circuit.
If the power light flashes 3 times as it lights for 2 sec.| The drying fan temperature sensor is faulty or there is a broken circuit.
If the power light flashes 4 times as it lights for 2 sec.| The seat temperature sensor is faulty or there is a broken circuit.
If the power light flashes 7 times as it lights for 2 sec.| The dryer fan may be faulty.
When the product is in use, the leakage protection switch on the power supply trips from time to time| Leakage beyond a normal range has been detected.

WARM PROMPT

• Please read the above troubleshooting and follow the instructions.

Maintenance Service Sheet

Product|  | Product code|
---|---|---|---
The selling store|  | Purchase date|
Province                 City| Dealer ( signature )：
Maintenance content|
Free maintenance regulation:

1、Free maintenance is provided when you use it properly following instructions and under warranty.

2、Please contact the dealer or the company if the fault occurs under warranty.
3、The following situations are chargeable for maintenance under warranty:

① Faults or damages caused by the improper operation, repair or reinstall.

② Faults or damages caused by forced movement after the product is installed.

③ Faults or damages caused by earthquakes, fires, floods, lightning strikes, corrosive liquids, abnormal voltages and other natural disasters.

④ Faults or damages caused by other approaches that are not for family use.

⑤ Fail to provide the maintenance service sheet.

⑥ There are no detailed records or there are modified records on the maintenance-service sheet. 4、This maintenance service sheet is valid.

5、This maintenance-service sheet is unrepeatable, please safe keep it.

6、The customer can go to the local repair network or send the products back to the company for free repair within two years from the purchase date.

Executive standard: CONFORMS TO UL STD. 1431 ASME A112.4.2-2021
Warranty period: within two years from the purchase date

• Due to the constant improvement of our products, we will keep the final interpretation of products changing.
• If the products you bought are different from the instructions, please in kind prevail.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CONTACT

• KELISS TRADING CO., LTD
• ADD： RM4, 16/F, HO KING COMM CTR,
• 2-16 FAYUEN ST, MONGKOK KOWLOON,
• HONG KONG

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>