sunlight HD03058 CCT and Wattage Selectable Round Flushmount Ceiling Fixture Instruction Manual

sunlight HD03058 CCT and Wattage Selectable Round Flushmount Ceiling

Fixture

Specifications

• Product Name: CCT & Wattage Selectable Round Flushmount Ceiling Fixture
• Color Temperature (CCT) Range: 3000K to 5000K
• Wattage Range: Adjustable
• Assembly Time: 15 minutes
• Tools Required: Phillips Screwdriver (not included)

Product Usage Instructions

Safety Information

PREPARATION: Before beginning assembly, ensure all parts are present. Do not proceed if any part is missing or damaged.

Installation Instructions

1. Align the crossbar (DD) with the fixture pan (A) and insert long screws (BB) through the aligned holes, leaving space between the screw heads and the crossbar.
2. Attach the crossbar (DD) to the outlet box using short screws (AA).
3. Connect fixture wires to supply wires (black to black, white to white, green to copper/bare) using wire nuts (CC). Ensure proper grounding.
4. Lift fixture pan (A) towards the ceiling, tuck wires into the outlet box, align keyholes on the fixture pan with long screws, and secure by twisting.
5. Adjust CCT and Wattage settings using the switches on the fixture to desired levels before proceeding.
6. Insert diffuser (B) into fixture pan (A), align tabs and channels, and twist diffuser clockwise to secure. Ensure proper installation to prevent falling.

Care and Maintenance

Clean with a mild, non-abrasive glass cleaner and soft cloth. Do not use solvents or abrasive cleaners. Ensure power is off during cleaning.

FAQ

Q: What should I do if a part is missing or damaged?

• A: Do not attempt to assemble the product. Contact customer support for assistance.

Q: How do I adjust the CCT and Wattage settings?

• A: Use the toggle switches on the fixture to set the desired color temperature and wattage levels by following the markings next to each switch.

PACKAGE CONTENTS

HARDWARE CONTENTS

SAFETY INFORMATION

• Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.
• Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION:

• The fixture body is one piece. Do not disassemble it.
• This fixture is dimmable with most phase-cut triac dimmer switches, for the latest compatibility list, please visit www.energeticlighting.com.

FCC

NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

PREPARATION

• Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product.
• Estimated Assembly Time: 15 minutes
• Tools Required for Assembly (not included): Phillips Screwdriver

INSTALLATION INSTRUCTIONS

1. Align two of the threaded holes on the crossbar (DD) over one set of keyhole slots on the fixture pan (A). From the inside of fixture pan (A), insert long screws (BB) into aligned holes, leaving about 1 in. of space between the screw heads and crossbar (DD).
   • Note: Do not install fixture pan (A) yet.
   • Hardware Used
2. Attach crossbar (DD) to outlet box (not included) using short screws (AA).
   • Hardware Used
   • AA Short Screw
3. Connect the fixture wires to the supply wires — black to black, white to white, and green to copper/bare.
   • WARNING: If there is no ground supply wire, stop installation and consult a qualified electrician.
   • Once wire connections are made, secure each with a wire nut (CC).
   • CC Wire Nut
4. Lift fixture pan (A) toward the ceiling and carefully tuck wires into the outlet box.
   • Align keyholes on fixture pan (A) with long screws (BB), then twist fixture pan (A) until the long screws (BB) engage the narrow end of the keyholes Tighten long screws (BB) to secure.
5. This fixture allows the correlated color temperature (CCT) of the LEDs to be adjusted from warm white (3000K) to cool white (5000K) as desired. The wattage can also be adjusted to a lower level if a fixed lower light level is desired for the fixture location.
   • Before proceeding to the next step, the CCT switch and Wattage switch should be set to the desired positions by moving the toggle switch through the range of detents or clicks and following the position markings next to each switch.
6. Align the tabs on fixture pan (A) with the channels on diffuser (B), then insert diffuser (B) into fixture pan (A).
   • Carefullly twist the diffuser (B) clockwise until secure.
   • CAUTION: Make sure the upper lip of the diffuser (B) is secured completely by the tabs on the fixture pan (A). If not, the diffuser (B) could potentially fall and break.

CARE AND MAINTENANCE

• Clean with a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents.
• When cleaning the fixture, make sure the power is turned off, and any liquid spray should be applied to the cleaning cloth and not sprayed directly onto the fixture itself.

TROUBLESHOOTING

2.  Incorrect wire connection.

3.  Defective wall switch.

| 1.  Check the circuit breaker or wall switch.

2.  Check wire splices.

3.  Replace switch.

Circuit breaker trips when the light is turned on.| Crossed wires or power wire is grounded out.| Verify wires are correctly connected.

• Sunshine Lighting Company
• www.sunlite.com
• 744 Clinton Street Brooklyn, NY 11231, USA
• T. 718.768.7000
• F. 718.768.0970

Documents / Resources

| sunlight HD03058 CCT and Wattage Selectable Round Flushmount Ceiling Fixture [pdf] Instruction Manual
HD03058 CCT and Wattage Selectable Round Flushmount Ceiling Fixture, HD03058, CCT and Wattage Selectable Round Flushmount Ceiling Fixture, Selectable Round Flushmount Ceiling Fixture, Round Flushmount Ceiling Fixture, Flushmount Ceiling Fixture, Ceiling Fixture
---|---

References

• Energetic Lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>