sigel Glas-Magnetboard Artverum Instruction Manual

: June 4, 2024
: sigel

Table of Contents

Mounting and safety instructions
SAFETY & GUARANTEE
MOUNTING INSTRUCTIONS
SAFETY PRECAUTIONS
SAFETY
GUARANTEE
MAGNETS
DISTANCE BETWEEN DRILL HOLES
PRODUCT RANGE
ACCESSORIES FOR MAGNETIC GLASS BOARDS
GLASS BOARD MARKERS
ACCESSORIES FOR MAGNETIC GLASS BOARDS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Glas-Magnetboard Artverum
Instruction Manual sigel Glas-Magnetboard Artverum

Glas-Magnetboard artverum ®

Mounting and safety instructions

sigel Glas-Magnetboard Artverum FIG

Congratulations! In choosing this artverum® Magnetic Glass Board, you have chosen a striking designer piece. With its outstanding, prizewinning design it adds a stylish touch to your meeting rooms or conference rooms. The understated styling with its simple, straight lines and the polished tempered glass turn the board into a genuine designer piece for the wall. Mounted without frames for a free-floating, 3D look. Mounting instructions: Page 3, 5 Accessories: Page 11-13

SAFETY & GUARANTEE

Sigel’s artverum® Magnetic Glass Boards guarantee the highest level of safety!
➔ TÜV-approved safety mountings without frames hold the boards securely to the wall
➔ TÜV and GS-approved product safety
➔ High-quality tempered glass/safety glass (EN 12150-1)
Superb brand quality – 25-year guarantee for the glass surface!
➔ Guarantee that the glass surface will remain perfect to write on and easy to clean – no smudges or residue – when using Sigel glass magnetic board accessories.*
➔ The guarantee does not apply in cases of mistreatment, negligence, incorrect usage or other methods of utilization that do not comply with the enclosed instructions.
➔ For the terms of our manufacturer‘s guarantee, visit www.sigel.co.uk/guarantee

MOUNTING INSTRUCTIONS

Magnetic Glass Board
Anchors
Screws
Wall fixings
Mounting fittings on the board

The enclosed anchors and screws are suitable for solid walls only. For all other walls, please use special anchors and screws. sigel Glas-Magnetboard
Artverum FIG 4

www.sigel-style.it/montaggio
MOUNTING INSTRUCTIONS

Before mounting, check that there are no service pipes, e.g. for electricity, gas or water, in that part of the wall.
When mounting the magnetic glass board, please ensure that it does not come into contact with sharp objects or hard surfaces such as stone or tiles. We cannot accept any claims for resulting damage to the board. Place the board on a soft surface until it is ready to be mounted and do not remove the protective corners until it is attached to the wall.
The magnetic glass board is suitable for wall mounting only.
In order to mount our magnetic glass boards correctly, we recommend using the enclosed drilling template. You will find the measurements for the relevant distances
between drill holes on page 10 and on our website at www.sigel.co.uk/mounting

MOUNTING

The magnetic glass board can be mounted in portrait or landscape format. The enclosed drilling template makes it simple to mark the position of the drill holes. The wall fixings d are screwed securely to the wall using anchors b and screws c. The side of the board with the Sigel logo should be facing outwards (Fig. I).
Tip: Please use a spirit level to check that the wall fixings d are lined up straight.
The wall fixings d have an oblong hole that can be used to adjust their position if necessary. To do so, loosen the screw and move the wall fixings d vertically or horizontally as required. Then tighten the screw again.
The magnetic glass board a is then mounted onto the wall fixings d (Fig. II). There are two mounting fittings e on the back of the board for this. Each mounting fitting e has two openings (Fig. III); the wall fixings d must always be slotted into the top opening rather than the side opening, whether the board is hung in portrait or landscape format. Place the mounting fittings e on the back of the board over the wall fixings d so that the wall fixings d are in the centre (Fig. III). Now slide the board downwards so that the wall fixings d click into the mounting fittings e (Fig. IV) and the board is mounted securely.
Make sure that the magnetic glass board is always mounted on two fittings and check that the board is securely in place before letting go. Silicon pads on the back of the board keep it steady while it is being written on.

SAFETY PRECAUTIONS

The artverum® Magnetic Glass Board is made of tempered safety glass tested to EN 12150-1.
The glass surface should be written on using only special markers for glass. The magnetic glass board can be cleaned with a damp or dry cloth. Please do not use abrasive scouring agents, detergents or chemicals to clean the board. To prolong the life of your board, we recommend using our own Sigel accessories: liquid chalk markers and microfibre cloth. Sigel GmbH does not assume any responsibility or guarantee for boards that have been incorrectly mounted or for any resulting damage.

SAFETY

With TÜV-approved safety mounting fittings plus superb function and product quality – tested and approved by the Global Safety Certification of the TÜV Saar branch (safety, fitness for purpose, and tested safety).

GUARANTEE

We offer a 25-year guarantee that the glass surface will remain perfect to write on and clean. We guarantee that the magnetic glass board will remain easy to wipe and free of smudges and another residue when using Sigel accessories and following our instructions for use. This guarantee does not apply in cases of mistreatment, negligence, incorrect usage, or other methods of utilization that do not comply with the enclosed instructions.

MAGNETS

As this magnetic board is made of thick glass, you will need to use the enclosed SuperDym magnets or magnets with an extra strong hold to attach items to it. Treat the SuperDym magnets with caution at all times and separate them by sliding them apart sideways.
Please ensure that there is a distance of at least 10 cm between any two magnets on the artverum® Magnetic Glass Board.
If used incorrectly, two or more magnets may collide unexpectedly, causing the magnets to splinter and the magnetic coating to chip.
Splinters can fly off the magnet, injuring people nearby and damaging the glass surface of the board. Careless use can lead to fingers or skin becoming jammed between two magnets, resulting in bruising.
Magnets create a strong, far-reaching magnetic field. Among other things, they can cause damage to televisions, laptops, computer hard drives, credit cards and EC cards, data carriers, mechanical watches, hearing aids, and loudspeakers. Magnets can affect the functioning of pacemakers and heart defibrillator implants. Magnets are not toys! Keep them away from children – small parts are a choking hazard. Make sure that the magnets are kept out of the reach of children. Sigel cannot be held liable for any damage or injury caused by a failure to follow these safety measures.

DISTANCE BETWEEN DRILL HOLES

sigel Glas-Magnetboard Artverum FIG 5

PRODUCT RANGE

sigel Glas-Magnetboard Artverum FIG 6

Discover the variety: www.sigel.co.uk/artverum

ACCESSORIES FOR MAGNETIC GLASS BOARDS

SUPERDYM MAGNETS
In 4 strengths (approx. 8 sheets, 15 sheets, 25 sheets, and 35 sheets of A4 paper, 80 gsm)

Super-Strong for Format 20x20x20 mm
Superdry Magnets C20

white 2 pcs. No. GL 723| black 2 pcs. No. GL 722
sigel Glas-Magnetboard Artverum FIG 9
gold 2 pcs.No. GL 721| copper 2 pcs. No. GL 720

for max. 8 A4-
sheets Format 10x mm
SuperDym Magnets C5
6 pcs. No. GL 192
10 pcs. No. GL 193| for pour max. 8 A4feuilles
Format Ø 10×10 mm
SuperDym Magnets
C5 5pcs.
No. GL 700
10pcs.
No. GL701

for max. 8 A4-sheets
Format Ø 12,7 mm
Superdry Magnets C5
3 pcs. No. GL 702| for 15 A4-sheets
Format 20x10x20 mm
Superdry Magnets C10
2 pcs. No. GL 704

for max. 25 A4 sheets feuilles
Format 20x20x20 mm
SuperDym
Magnets C20 1pc
No. GL 196
2 STpcs
No. GL 706| for max. 35 A4
Format 20x30x20mm
SuperDym
Magnets C30 1pc.
No. GL 1972pcs.
No. GL 707

Sigel accessories are available from specialist stationery suppliers

GLASS BOARD MARKERS

Perfect for jotting down notes and ideas during meetings and conferences.
Good coverage produces clear lettering in the classic business colors of black, blue, red, and green.

Pen Tray 17 cm // clear acrylic // No. GL 199 sigel Glas-Magnetboard Artverum
FIG 14

Glass board markers are ideal for White Magnetic Glass Boards
Glass board markers are also suitable for sigel Glas-Magnetboard Artverum FIG
16 Pen Tray 50 cm // clear acrylic // No. GL 198

ACCESSORIES FOR MAGNETIC GLASS BOARDS

CHALK MARKERS
For decorative writing that catches the eye. Ideal in catering outlets, foyers, and in the private sphere. Extremely good coverage produces striking lettering in black, white, and luminous colors. sigel Glas-Magnetboard
Artverum FIG 17

Delta Microfibre Cloth // blue // wash at 40° // No. GL 189
Chalk Markers 20 round tip 1-2 mm sigel Glas-Magnetboard Artverum FIG
18

Chalk Markers 50
chisel tip 1-5 mm sigel Glas-Magnetboard Artverum FIG
19 Chalk Markers 150
chisel tip 5-15 mmBoard Eraser // magnetic // No. GL 188