Electrolux EPWD257UTT Luxury Glide Pedestal with Spacious Storage Drawer Instruction Manual

June 2, 2024
Electrolux

Electrolux EPWD257UTT Luxury Glide Pedestal with Spacious Storage Drawer

Electrolux-EPWD257UTT-Luxury-Glide-Pedestal-with-Spacious-Storage-Drawer-
PRODUCT

Product Information

Specifications:

  • Model Number: A27862901
  • Dimensions: 24 7/8 in (632 mm)

Product Usage Instructions

Installation Instructions:

  1. Clean the floor where the front feet of the washing machine will be located after installation. Ensure the floor is free of dirt, dust, liquids, oils, cracks, or gaps.
  2. Adjust the feet of the pedestal so that the washer does not rock back and forth or vibrate.
  3. Cut the template along the dotted line and remove the cutouts. Align the paper template with the 2 front pedestal feet.
  4. Peel the paper off the back of one pad, then tip the machine back and stick the pad to the floor adhesive side down so that the feet rest on the rough side. Repeat for the other pad.
  5. Check that the pedestal feet are located on the pads and are adjusted for minimal vibrations.

Important Notes:

Do NOT stick the pad to the bottom of the pedestal foot. Stick to floor, remove backing, and stick the pads to the floor and not the foot.

FAQ

Q: Can I use these pads for any washing machine model?

A: These pads are specifically designed for use with our washing machine model A27862901. It is recommended to use them only with this model for optimal performance.

Q: How often should I check and readjust the feet of the pedestal?

A: It is advisable to check and readjust the pedestal feet periodically, especially if you notice any rocking or excessive vibrations during machine operation. Regular maintenance will ensure proper stability.

IMPORTANT
Do NOT stick the pad to the bottom of the pedestal foot

  1. Rough side up
  2. Stick to floor
  3. Remove backing
  4. Stick the pads to the floor and not the foot

CAUTION
Use care when removing the non-skid pad.

Cut and discard

Electrolux-EPWD257UTT-Luxury-Glide-Pedestal-with-Spacious-Storage-Drawer-
FIG-2

  1. Cut along the dotted lines to remove cutouts.
  2. Align the template with the 2 front feet.
  3. Tilt the unit back and place the pads on the floor with the rough side up.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals