boAt Aavante Bar Opera Sound Bar User Manual

Aavante Bar Opera Sound Bar

USER MANUAL
SETTING UP THE SOUNDBAR
• Place the sound bar horizontally on a solid
surface such as a TV unit or shelf and align it
centrally.
• For the best sound output and good
airflow around the soundbar. place your
soundbar and subwoofer as shown in the
image below.
OPERATING INSTRUCTIONS
Powering On/Off
• Plug the power cable of the sound bar into the wall socket. The sound bar will
automatically enter standby mode.
• Press the Power /Source button on the sound bar to power on. Press the INPUT
button to switch t he input mode.
• To turn it off, press and hold the Power / Source button on the sound bar tor
about 2 seconds to enter standby, and then unplug it fTom the wall socket.
BLUETOOTH PAIRING
• Use either the buttons on the Soundbar or the ” Input” button on the remote to
act ivate BT mode.
• A Blue LED indicator will indicate that BT mode has been selected.
• Act ivate the pai ring function on your phone or other compatible device and
select” AAVANTE BAR OPERA ”
• When successfully paired, you will hear a tone and the LED will stay on,
SAFETY & WARNINGS
Caution
To reduce the risk of electric shock, do not dismantle the product and do not expose
it to rain or moisture, The unit has no user~serviceable parts inside. Refer servicing to
a qualified personnel only
G\_ The lightning f lash within an equilateral triangle is intended to alert you to the
~ presence of uninsulated dangerous voltage within the product’s enclosure that
may be of suffic ient magnitude to constitute an electric shock to a person or
persons.
A\. Important! This symbol alerts you to read and observe important warnings and
Lil instructions on the unit or in this manual.
Notice:
This appliance is not intended for use by persons ( including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they are under proper supervision.
Children should be supervised to ensure that they do not play with the appliance.
1. To prevent possible hearing damage, do not listen at high volume levels for longer
periods of t ime.
2. Never use the device unsupervised! Switch off the device when not in use.
3. The appliance is not intended to be operated by means of an external t imer or
separate remote controller system.
4. 4.lf the power supply cord is damaged, it must be replaced by the manufacturer,
service agent or sim ilarly qualified persons in order to avoid a hazard.
5. Before operating this system, check the voltage of this system to see if it is
identical to the voltage of your local power supply.
6. The unit should not be impeded by covering the venti lation opening with items
such as newspaper, table-cloths. curtains etc. Make sure that there are at least 20 cm
of space above and at least 5 cm of space on each side of the unit.
7. The system must not be exposed to dripping or splashing. Do not place objects
filled w ith liquid s such as vases, bottles or humidifiers on the unit.
8. To prevent fire or shock hazard, do not expose this equipment to direct heat, rain,
moisture or dust.
Notes:
• If your Pairing device is switched off or is manually disconnected, the soundbar
will automatically enter pairing mode.
• The successful ly connected device w ill be re-established once you re-enter the
wireless range (10 meters).
• There is no automatic shutdown in pairing mode. The sound bar will remain in
pairing mode even if no device is paired, so switch it off if not in use.
USING THE SOUNDBAR
Aux mode
• Firstly, connect t he sound bar to your PC, laptop, smartphone, TV. or other
audio devices by using an AUX cable provided. Make sure that these devices have
both AUX IN and AUX out terminals.
• Then short-press the “POWER/SOURCE” button on Soundbar or on the remote
control to switch the sound bar to Aux mode. once the sound bar is connected to
AUX mode, the source LED light will indicate green color.
• Playback can only be controlled on your connected device.
Note: For some computers, you may need to access the audio control panel to
manually set the soundbar.
USB MODE
• Plug the power cord of the soundbar & subwoofer into a wall outlet., it will
automatically enter standby mode.
• Press the STANDBY button on the soundbar or the POWER button on the
remote control to turn the soundbar on.
• To turn off, press and hold the STANDBY button or POWER button on the
remote control for about 2 seconds, the soundbar w ill enter standby mode, and
then unplug it fTom the wall outle
9. Do not place this unit near any water sources e.g. taps, bathtubs, washing
machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
10 . Do not place this unit close to a strong magnetic field.
11. Do not place the unit on an amplifier o r a receiver.
12. Do not place this unit in a damp area as the moisture w ill affect the life of electric
components.
13. Do not attempt to clean the unit w ith chemical solvents as this might damage the
finish. Wipe with a clean, dry or slightly damp cloth.
14. When removing the power plug from the wall outlet. always pull d irectly on the
plug, never pull on the cord .
15. Depending on the electromagnetic waves used by a television broadcast, if a TV
is turned on near this unit w hile it is also on, lines might appear on the LED TV.
Neither this unit nor the TV is malfunctioning. if you see such lines, keep this unit
away from the TV set.
16. The mains plug is used to disconnect the device. the disconnected device should
remain readily operable.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. Keep these instructions. Fo llow all instructions. Heed all
warnings.
2. Do not use the device near water.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install in accordance w ith the manufactur•
er’s instructions.
5. Do not install near any heat sources such as radiators. heaters, stoves, or other
devices (including amplifiers) that produce heat.
6. Do not ignore the safety measures of a polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other.
7. Pay special attention to the positioning of cords, plugs, and power sockets,
especially the point where they exit from the unit.
8. Only use attachments/accessories specified by the manufacturer.
9. Unplug this apparatus during lightning storms or when not in use.
10. Refer all servic ing to qualified service personnel. Servicing is required when the
apparatus has been damage in any way, for example, when the power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Working Range 10m
Driver Size S s•a Scm”2
Supported Prof oles A2DP, AVRCP
FreQuency 50Hz-20KHz
!mpedanc& 40*2
Output Power 3SW·2=70W
D1me-n51ons

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>