UL Listed Connect 2BCGV0004 Wireless Power Bank Instruction Manual
- June 2, 2024
- UL Listed Connect
Table of Contents
UL Listed Connect 2BCGV0004 Wireless Power Bank
Product Information
Specifications:
- Model: SP0611
- Capacity: 5000 mAh
- Ports: USB-A Output Port, Type-C Input Port
- Functions: Wireless Charging, LED Indicators, ON/OFF Button
Product Usage Instructions
Charging the Powerbank:
- Connect the included charging cable to the Type-C Input Port of the power bank.
- Plug the other end of the charging cable into a power source to charge the power bank.
Charging Mobile Phones and Other Devices:
When charging mobile phones or other devices:
- For wired charging, connect the device to the USB-A Output Port using a compatible cable.
- For wireless charging, ensure there are no objects between the device and the wireless charging surface to avoid interference with the charging process.
Safety Precautions:
- Read all instructions before use.
- Avoid using or storing the product in extreme conditions.
- Do not use a damaged power bank to prevent risks of explosion or injury.
- Avoid disassembling the device; seek professional help if needed.
- Remove attachments from the phone before wireless charging to ensure effectiveness and prevent overheating.
FAQ:
-
Q: What should I do if the wireless charging LED indicator does not light up?
A: If the LED indicator does not light up during wireless charging, ensure there are no obstructions between the device and the charging surface. Also, check if your device is compatible with wireless charging. -
Q: Can I use this power bank with devices other than mobile phones?
A: Yes, you can use this power bank to charge various devices that are compatible with USB charging, including tablets, smartwatches, and more.
Functions
- USB-A Output Port
- Wireless Charging LED Indicator
- LED Indicators
- Type-C Input Port
- ON/OFF Button
- Wireless Charging Surface
What’s Included
- 1 x Wireless Power Bank
- 1 x Charging Cable
- 1 x Instruction Manual
Tech Specification
- Type-C Input/output: 5Vdc / 2A
- USB-A Output: 5Vdc / 2.1A
- Wireless Output: 5W
- Battery/Cell Capacity: 18.5Wh, 3.7V / 5000mAh
- Product Capacity(USB-A/Type-C): XXWh, 5Vdc/XXXXmAh
- Operating temperature:
- 5~40°C tor Charging
- 0~40°C for Discharging
- Product Name: Power Bank
Important Instructions
- Charging the Powerbank:
- Be sure the power bank is fully charged before usage.
- The LED Indicators(3) display the battery capacity of the powerbank.
- Using the included Type-C to USB-A charging cable, insert the USB-A tip of the USB-A port of a computer and the Type-C tip into Tthe ype-C Input(4).
- Once connected, the LED indicator(3) will
- Once fully charged the LED indicator will charge the cable from the power bank.
- Charging Mobile Phones and Other Electronic Devices:
- Connect the charging cable to your mobile phone/device using the appropriate connector and connect the USB-A tip of the cable to either USB-A Output(1).
- This device will begin to charge automatically, and the LED indicators(3) will glow.
- Remove the charging cable from your device when it is fully charged.
- The power bank can be turned OFF by double pressing the ON/OFF button(5).
- Wireless Charging Mobile phones and other electronic devices:
- Press the ON/OFF button to turn ON the powerbank.
- Place the wireless charging supported mobile device on the wireless charging surface(6), LED indicator(2) will glow GREEN when the device is charging.
- The phone will begin to charge automatically.
- Once fully charged remove the device.
Note:
When wireless charging, if the LED indicator flashes the device is either NOT
a wireless charging device or there is an object between the device and the
charging surface interfering with the charging. process.
SAFETY PRECAUTIONS
WARNING
When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F(0°C) or above 113°F(45°C).
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device over its output rating. Overload outputs above the rating may result in a risk of fire or injury
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not disassemble the device. For professionals, Corriere assembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause an explosion.
- To ensure product safety, ensure that identical replacement parts.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. You must remove attachments from the phone before charging on this device.
FCC Statement
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
this can be determined by turning the equipment the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
IC Statement:
This device contains license-exempt transmitter (s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment.
CAN ICES-3 (B)/NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
CAUTION:
- Risk of Fire and Burns, don’t open, crush, disassemble, or dispose of in a fire.
- Accessible surfaces held or touched for short periods only. Don’t heat above 45 °C or Incinerate.
Follow the Manufacturer’s Instructions
Name of the Distributor:
Leedsworld Inc
- Address of the Distributor: 400 Hunt Valley Road, New Kensington, PA 15068 USA.
- WWW.PCNA.COM
- Made in China
- FCC ID: 2BCGV0004
- IC: 31955-00002
- HVIN: 002