Wilfa HS1-SWB Innovac Aqua Plus Cordless Stick Vacuum And Wet Mop Instruction Manual
- June 13, 2024
- Wilfa
Table of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- ATTENTION – BATTERY
- ATTENTION – CLEANING AND MAINTENANCE
- PRODUCT OVERVIEW
- OPERATION
- DISPLAY
- CHARGING
- CLEANING AND MAINTENANC
- CLEANING
- FLOOR BRUSH
- TROUBLESHOOTING
- GUARANTEE
- PRODUCT SPECIFICATIONS
- SUPPORT AND SPARE PARTS
- RECYCLABILITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wilfa HS1-SWB Innovac Aqua Plus Cordless Stick Vacuum And Wet Mop
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- This product is intended for indoor, non-industrial, non-commercial, household use only.
- Do not use the item outdoors or for any other purpose
- Suitable for dry locations only. Do not use outdoors or on wet surfaces.
- Do not immerse in water.
- Do not use the hose if it is damaged.
- The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
ATTENTION – BATTERY
- Do not charge the vacuum cleaner at the ambient temperature of lower than 5°C and higher than 40°C.
- Let the vacuum cleaner cool down after use before charging.
- If the low power icon is shown on the display after turning the vacuum cleaner on, you should charge the battery.
- When the battery is fully charged, disconnect the power supply.
- If your vacuum cleaner is not used for a long time (more than 2 months), please unplug it from the power supply. In order to ensure the battery life, it needs to be fully charged once every 2 months.
- Only use the maximum power when needed. Too much usage on max will shorten the expected battery life
ATTENTION – CLEANING AND MAINTENANCE
- To ensure the suction force of your vacuum cleaner, please clean the floor brush, brush rollers, filters, and dustbin regularly.
- Make sure that all components are installed properly, otherwise it could cause product failure.
- Do not let water get into the electric elements of your vacuum cleaner, it could cause product failure.
CORDLESS VACUM WITH WET MOP · HS1-SWB
PRODUCT OVERVIEW
-
Main unit
-
Extension tube
-
Electric floor brush
Components: -
2- in 1 brush
-
Crevice nozzle
-
Power adapter
-
Wall mount
-
Mini power brush
-
Combo carpet brush
-
Telescopic crevice nozzle with
LED light -
Wet mop attachment
-
Washable mop pad
-
Hard floor brush
OPERATION
- Press the power button to start.
- After switching the vacuum cleaner on, press the speed regulation button to adjust the speed. The speed will go from Auto-High-Medium-Low.
- When using the Auto level, the dust sensing function is enabled. After sensing dust, the background animation on the display will change from blue to purple. If no dust is detected, the animation remains blue, and power will run on low.
- The battery time is indicated by a circle on the display, divided into 6 sections. As the battery is consumed the circle will lower section by section. When the battery is low, the display shows “Low Power”.
MOP ATTACHMENT
- Before use, attach the mop onto the tank. Fill the tank with water and close the lid. Do not fill over the max indicator.
- Attach the mop to the floor brush by placing the mop attachment on the floor, and gently lower the electric floor brush onto the mop attachment (see illustration)
- Press the foot pump to pump water onto the mop to keep the mop damp. Wet the mop before attaching it to the mop attachment for a better cleaning result
- Store the mop attachment with an open lid to make it dry and to prevent mould.
- The mop pads are machine washable at 40°. Clean after every use.
- Do not emerge the tank in water.
- Do not use floor cleaner.
- Do not use on wet surfaces.
DISPLAY
-
Filter clean
-
Dust tank blocking
-
Roller blocking
-
Air flow blocking
-
Air flow blocking
-
Brush blocking
-
Low speed
-
Mid speed
-
High speed
-
Low battery
-
Charging finished
-
Charging
CHARGING
-
Hang the vacuum cleaner on the wall rack
-
Connect the power cord to the charging port.
-
Charge for 4–6 hours.
CLEANING AND MAINTENANC
DUST CUP
Disassembly Hold the bottom of the dust cup. Press the release button and carefully pull the dust cup out downward.
Installation Push the dust cup up with the suction inlet facing outward.
CLEANING
Press the Dust cup release button, and the bottom cover opens. Clean the dust bin with water. Make sure it is completely dry before re-assembling.
FILTER COMPONENTS
-
Hold the ribs on both sides and pull upwards to remove the filter components.
-
Remove the filter sponge, lay it with the white side down and tap it to remove dust.
-
Rinse the parts under water.
-
The parts needs to be completely dry before installing the filter components into the dust bin
DUST SENSOR
For the dust sensor to function optimally it needs to be cleaned regularly. To clean the dust sensor just use your finger and remove the dust collected on the sensor. The sensor is located inside the tube on two sides. Use your finger or a dry towel to wipe over the sensors.
FLOOR BRUSH
-
Press the button and remove the electric floor brush from the extension tube.
-
Press and hold the button and turn the end cover upwards.
-
Pull out the rolling brush and clean it. Do not use water!
TROUBLESHOOTING
Problem | Possible reason | Solution |
---|---|---|
Three indicators flash | Rolling brush is tangled by hair. | Remove hair or any |
foreign object stuck in the rolling brush
The ambient temperature for operation is too high or too low| Use the vacuum
cleaner in the proper environment.
Electric floor brush is not working| Large pieces of waste have been engaged.|
Disassemble the electric floor brush and remove the waste.
The rolling brush has been tangled with hair.| Remove the rolling brush from
the electric floor brush and remove the hair from the brush.
Operation duration becomes shorter| Battery aging| Contact customer service
The ambient temperature for operation is too high or too low| Make sure the
vacuum cleaner is not placed in the sunlight if it is too warm, and make sure
doors and windows are closed if it is too cold.
The battery is not fully charged| Charge the battery
Suction force is weakened| The filter sponge of the dust cup is blocked| Clean
the filter sponge
The suction inlet of the floor brush or accessories is blocked| Remove the
objects blocking the suction inlet
The filter components are not fully dried after washing with water| Make sure
the filter components are fully dried, and assembled in the correct way
Charging failure| Ambient temperature during charging is too high or too low|
Charge the appliance at the proper temperature. Make sure the vacuum cleaner
is not placed in the sunlight if it is too warm, and make sure doors and
windows are closed if it is too cold.
Battery liquid leakage| The vacuum cleaner has not been used for a long time.|
Change the battery. Contact the store to replace the battery
Error on the display| The vacuum cleaner is lacking suction power. This can be
due to something stuck inside the extension tube, filter being clogged with
dust, or that the rolling brush is tangled with hair.| Remove any object in
the extension tube, clean the filter components, and clear the rolling brush
for hair.
GUARANTEE
Wilfa issues a 5 year guarantee on this product from the day of purchase. The guarantee covers production failure or defects that arise during the guarantee period. Your purchase receipt works as proof towards retailer if claiming your guarantee.
The guarantee is valid only for products that are bought and used in private households. The guarantee is not valid if the product is used commercially. The guarantee is not valid if the product is misused, used by negligence, if not following instructions given by Wilfa, if modified or if unauthorized reparation is done. Wilma is not responsible for damage to third party parts and other collateral damage.
The guarantee is also not valid for normal wear of the product, misuse, lack of maintenance, use of wrong electrical voltage or:
- Overloading of product
- Parts which are normally worn down
- Parts you can expect being replaced regularly (e.g. filter, battery etc.)
- Wear parts like motor heads, nozzles, battery, brushes, filters, wheels, light.
Wilma is also not responsible for damages occurred because of excessive use, incorrect assembly, incorrect storage, incorrect charging, lack of cleaning etc. The battery comes with a 1 year warranty. The warranty will not be valid if the appliance has not been charged according to the manual.
PRODUCT SPECIFICATIONS
BATTERY
- Charging time: 4-6 hours.
- Battery time: up to 60 minutes on low, 20 minutes medium, 10 minutes max, 15-30 minutes auto. The battery time on auto depends on the amount of dust detected.
- Defected batteries can be replaced at our service partners.
- Battery efficiency will degrade with time and use. With normal household usage, and by following the usage, charging and maintenance guidelines you can expect around 80% of efficiency after 5 years or 390 hours of use.
SUPPORT AND SPARE PARTS
For support please visit us at wilfa.com, and see our customer service/support page. Here you will find frequently asked questions, spare parts, tips and tricks and all our contact information.
RECYCLABILITY
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling free of charge.
References
- Wilfa - Norwegian quality since 1948 – Wilfa AS
- Koti - Wilfa
- Wilfa - Norwegian quality since 1948 – Wilfa AS
- Hem - Wilfa
- Wilfa – Norsk kvalitet siden 1948