AutoHeight DAFZWZDJ5XA Homestyle Delights Automatic Height Measuring Device User Manual

AutoHeight DAFZWZDJ5XA Homestyle Delights Automatic Height Measuring

Device

Product Information

Specifications

• Product Name: AutoHeight
• Function: Automatic Height Measuring Device with Digital Clock & Date Ambient Light
• Power Source: Rechargeable battery (included)
• Charging: USB Type-C Charging Cable
• Maximum Height Measure: 7′ 6.4″
• Minimum Height Measure: 1 foot

Frequently Asked Questions

• Q: Can multiple users’ heights be stored in AutoHeight?
  • A: AutoHeight does not have a multi-user storage feature. Each measurement will be displayed temporarily before resetting to zero.
• Q: How often should I calibrate AutoHeight?
  • A: AutoHeight performs quick calibration automatically each time Height Measure Mode is entered. Ensure no obstacles between AutoHeight and the ground for accurate calibration.

Introduction And What’s Included

Introduction

AutoHeight is a home electronic device designed to automatically measure height, suitable for individuals of all ages, and particularly ideal for families with one or more children. The device also features calendar and clock functions, with automatic sensing capabilities when a user approaches. During measurement, it also illuminates an ambient light for enhanced experience. We believe that AutoHeight will certainly bring more convenience and enjoyment to your daily life!

What’s Included

• AutoHeight x 1 (rechargeable battery included)
• Wall Adapter/Holder x 1
• User Manual x 1
• USB Type-C Charging Cable x 1
• Assistive Measurement Plate x 1

Wall Installation

1. Treat the wall until it is dry, dust-free, and smooth
2. Peel off the adhesive protective film on the wall holder.
3. Paste it to the wall and let the adhesive sit for 5 minutes
4. Hang up the AutoHeight on the holder and the installation is complete
5. The installation height depends on the real situation, the maximum installation height is 8′ 2.4″
6. Maximum height measure: 7′ 6.4″
7. Minimum height measure: 1 foot

Components And Connections

Time Set Up

1. To turn on AutoHeight, press and hold the control knob for 3 seconds.
2. Rotate the control knob until the “time/adjustment indicator” light comes on.
3. Press the knob once to set the “Hour”, and rotate the knob to get the correct “Hour”, then press the knob again to confirm. Once “Hour” is set, “Minute” will automatically be ready for set up.Repeat the same steps to adjust “Month”, “Day”, and “DOW” (day of the week.

Measure Height

1. To turn on AutoHeight, press and hold the control button for 3 seconds.
2. Rotate the control knob until the “height measure indicator” light comes on, then press the control knob once to enter “Height Measure Mode”.
3. AutoHeight will perform quick calibration each time “Height Measure Mode” is entered. During calibration, please make sure there are no obstacles between AutoHeight and the ground.
4. A display of “0000” indicates that the calibration is complete, and you are now ready to measure height.
5. Stand still under AutoHeight, and align the center of your head with the height sensor.
6. The beep sound signifies that the measurement is complete, and at this point, you can read the height on the display.
7. The display will have x’ xxx” format, ie. x feet and xxx inches
8. The displayed height will remain for a few seconds and go back to “0000”, ready to measure again.

Considerate Tips

1. It is important to align the center of your head directly with thesensor to obtain the most accurate measurement.
2. A more accurate result can be achieved by using the “AssistiveMeasurement Plate”. Place and hold the plate on top of your head, and press it down slightly to minimize the margin of error caused by your hair. Try to keep the plate level when measuring.
3. The best results for children are achieved with an adult’s assistance during the measurement.
4. During the measurement, the ambient light will automaticallyturn on.
5. AutoHeight can be reverted to the “Time Display Mode” by pressing the control knob if no more measurement is needed.

Battery Charging

1. AuotHeight is compatible with most chargers with a USB Type-Ccable
2. When the machine is charging, the charging icon on the screen lights up with a red color, the color will turn green when fully charged
3. It takes about 4-6 hours to get AutoHeight fully charged.
4. Battery life depends on actual usage, standby time is 60 days under normal circumstances.
5. AutoHeight is equipped with a moving sensor, it will change to a power-saving mode when no one is around it and turn off all the displays.
6. The display will come back on when it senses movement.

Troubleshooting

1. No Power: check the charger, and make sure AutoHeight is fully charged
2. Wrong Height Result: AutoHeight will perform quick calibration each time “Height Measure Mode” is entered. During calibration,please make sure there are no obstacles between AutoHeight and the ground. Wait until a display of “0000” indicates that the calibration is complete, and you are now ready to measure height.
3. Need additional Help?
   • Contact us at: homestyledelightstoyou@outlook.com, we are here to help!

Specifications

1. Product name: AutoHeight
2. Product model: X6
3. Main functions: Height measurement + time display
4. Rated power: 3W
5. Battery capacity: 1800mAh
6. Charging time: 4~6 hours
7. Stand-by time: 60 days
8. Length: 9.6″
9. Width: 5.7″
10. Height: 3.8″
11. Weight: 1.1 lb
12. Main material: ABS
13. Installation method: No need to drill holes on the wall

Maintenance

• Please use a dry cloth to clean any dust on the case and the display.AutoHeight is not a waterproof device.

Warnings

• AutoHeight is NOT a waterproof device
• AutoHeight is for home use purposes only, it is NOT a medical-device
• AutoHeight is NOT a toy for child/children of any age
• AutoHeight is for indoor use only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>