EDDA 80201-032-53 Interior Ceiling Light Instruction Manual
- June 2, 2024
- EDDA
Table of Contents
EDDA 80201-032-53 Interior Ceiling Light
Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
TOOLS REQUIRED
-
Phillips Screwdriver
-
Flathead Screwdriver
-
Knife
-
Wire Cutter
-
Percussion drill
-
Chopping bit Dia 6 mm
-
Ladder
-
Safety Goggles
Installation (Make sure to turn off the main power)
Step 1.
Step 2.
Step 3.
Step 4.
Package contents (parts are not to scale):
| Part | Description | Quantity |
|---|---|---|
| A | Fixture body | 1 |
| B | SS Self-Tapping screw | 3 |
| C | Wall expansion particle | 3 |
| D | Plastic cylinder (H) 8mm | 3 |
| E | Fiber sleeve | 3 |
| F | Silicon gaskets | 3 |
| G | Washer | 3 |
Parameters
Rated Wattage| Rated Voltage| Color Temperature|
Lumen
|
Lamp gurantee
|
IP Class
|
Dimension
---|---|---|---|---|---|---
17W| 220-240V| 3000K| 1500M| 3 years| IP44| 32032065mm
Care and Cleaning
EXTERIOR MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Customer Support
