LIFTnGO Lightweight and Portable Jeep Bronco User Manual

LIFTnGO Lightweight and Portable Jeep Bronco

Product Information

Specifications:

• Product Name: LiftnGo
• Type : Jeep/Bronco removal and storage system
• Support Posts : Yes
• Material : Durable weather-resistant EVA pad
• Range of Motion : 56 to 86 inches
• Additional Features:
  • Easy Handle
  • 5th Support Arm with Electrostatic powder coat paint finish
  • Rubber grip steering handles
  • Safe self-braking lifting/installation jack
  • Long legs for stability
  • High-quality caster wheels

Product Usage Instructions

Assembly:

1. Read all instructions before assembling.
2. Ensure the wheels are locked before use.
3. Use the LiftnGo on level ground with a smooth surface.
4. Attach the 5th Support Arm after removing your hardtop for added stability.

Usage:

1. Ensure the hardtop is clear of your Jeep/Bronco before using the LiftnGo.
2. Avoid pushing or adjusting the hardtop with your hands; use the LiftnGo for all movements.
3. Keep children away from the LiftnGo when in use.
4. Avoid storing the LiftnGo outdoors.

Maintenance:

Regularly inspect for any signs of wear and tear. Clean the LiftnGo as needed to maintain its performance.

FAQ

• Q: Can the LiftnGo be used for 2-door Jeep models?
  • A : The 5th Support Arm can be used for some 2-door Jeep models, depending on the size/configuration of the top.
• Q: Where can I find assembly instructions?
  • A : Assembly instructions are located on the back side of the product packaging.
• Q: How do I contact support for LiftnGo?
  • A : The best way to reach support is by emailing info@liftngo.net or visiting liftngo.net for more information.
  • For more detailed information, please visit the support page at liftngo.net or refer to the user manual.

Lightweight and portable Jeep/Bronco removal and storage system

READ ALL INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR LIFTNGO! For more information, visit our support page atliftngo.net.

CAUTIONS:

1. It is important to use the 5th Support Arm for some models to provide extra stability when storing your hardtop on the LiftnGo. The 5th Support Arm should be attached after removing your hardtop.(NOTE: The 5th Support Arm must be used for 4-door Jeep models. It can be used for some 2-door Jeep and 4-door Bronco models, depending on the size/configuration of the top).
2. Be sure the wheels are locked to ensure the lift is secured in place when storing your hardtop on the LiftnGo.
3. Do not store the LiftnGo outdoors.
4. Keep children away from the LiftnGo when in use for storing your hardtop.
5. Use the LiftnGo on level ground with a smooth surface. A slight incline or decline can be acceptable. 6. NEVER push on the hardtop or attempt to adjust its position with your hands when using the LiftnGo. (NOTE: When the LiftnGo is in use, all movement of the hardtop should be done using the LiftnGo). 7.
   • The hardtop must be 100% clear of your Jeep/Bronco before wheeling the LiftnGo out.

Usage Instructions

1. For Jeeps: Remove both (2) Freedom Panels. For Broncos: Remove all three (3) Freedom Panels.
2. Unsecure the bolts on each side of the hardtop above the driver and passenger seats.
3. Open the cargo door and lift the rear window completely.
4. Unscrew all Torx bolts that fasten the hardtop in the cargo area.
5. Detach the electrical connection in the driver’s side rear cargo area and the washer fluid.
6. Wheel the LiftnGo into the center of the rear cargo area; make sure all 4 Support Posts are positioned low enough to allow them to clear under the top window frame ridge.
   • (NOTE: the 5th Support Arm SHOULD NOT be attached to the LiftnGo at this time. You will attach the 5th Support Arm later in the process).
7. Turn the Easy Handle until all 4 Support Posts engage with the hardtop, making sure they are secure. 8. Turn the Easy Handle until the Hardtop is lifted enough to clear the entire Jeep/Bronco structure. (NOTE: It is best to lift your hardtop evenly. To ensure an even lift, the Support Posts can be arranged to different heights for hardtop interiors that are not flat).
8. Be sure to raise the LiftnGo high enough so the bottom of the Support Posts clear the rear gate when rolling the LiftnGo backward. (NOTE: the lift has a self-braking jack mechanism, so you can let go of the Easy Handle anytime, and the LiftnGo will not drop or lower).
9. After you have removed the hardtop and moved it away from your vehicle, attach the 5th Support Arm to the LiftnGo for extra stability when you are using the lift for hardtop storage. (NOTE: see #1 under Cautions for more information on whether or not the 5th Support Arm is necessary for your particular  model).
10. When storing your hardtop on the LiftnGo, lower the Lifting Jack for extra stability

To preview the VIDEO of Removing & Installing your hardtop, please visit

• LIFTnGO.NET/SUPPORT/USER

CUSTOMER SERVICE CONTACT AND RETURN INSTRUCTIONS:

If you have questions, need replacement parts, or would like to make a return – please contact us first.We are more than happy to provide support! Leave a message with your name, phone number, order number, and a brief description of why you are contacting us. We will make things right!

The best way to reach us is by email: info@liftngo.net

LiftnGo 2896 Harper Road Melbourne, FL 32934

References

• LIFTnGO™ for JEEP® Hard Top Removal Storage Tool

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>