Mirlori RGB LED Double Light Bathroom Mirror User Manual
- June 2, 2024
- Mirlori
Table of Contents
RGB LED Double Light Bathroom Mirror
User Manual
LED Mirror User Manual
IMPORTANT SAFETY INSTRUCTIONS
- Please carefully read these instructions before installation and retain for your future reference.
- Professional electrician is needed for installation.
DANGER : To reduce the risk of electrical shock
- For safety reasons, please turn off the power before installation.
- Always disconnect this furnishing from supply main before cleaning or servicing.
WARNING – To reduce the risk of burns, fire, electrical shock or in jury to persons
-
We recommend that the surface fuse is withdrawn to prevent accidental switching on while work is in progress.
-
Close supervision is necessary when the mirror light is used by or near children,invalids or disabled.
-
Use mirror light only for its intended use as described in these instruction. Do not use attachments not recommended by the manufacturer.
-
Never operate the mirror light if it wire damaged . If it is not working properly, or if it has been dropped or damaged or dropped into water.
Return the furnishing to a service center for examination or repair. -
Keep the wire away form heated surfaces.
-
Never drop or insert any object into any opening.
-
This product contains glass parts. Care must be taken when fitting or handling these parts to prevent personal injury or damage to the products.
-
Ensure the mounting surface is dry and strong enough to allow for the safe fitting of this fixture.
-
Ensure that current building regulations are adhered to at all times should an additional electrical supply be required.
-
Care must be taken before drilling fixing holes to avoid any existing wiring or paperwork that may be concealed;
-
For household/residential use only. Do not use outdoors.
-
This luminaire must be mounted or supported independently of an outlet box. Suitable for damp locations.
-
Mounting furnishings at the correct height.(1.5m Max. from the ground)
INSTALLATION WARNING:
- Risk of Electric Shock-Connect this furnishing to a properly grounded outlet only.
- Grounding Instructions：This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
- Risk of fire: This product must be installed in accordance with the applicable installation code by a person familiar with construction and operation of the product and the hazards involved.
Installation
Maintenance
- Do not touch the mirror with wet hands, and do not wipe the mirror with wet cloth to avoid increasing moisture intrusion.
2. It is recommended to wipe the mirror with a soft cloth or gauze.
3. Do not use any chemicals or misuse cleaning agents.