RUILANG 2A5LK-K11 Network Camera User Manual

RUILANG 2A5LK-K11 Network Camera

Specifications

• Product Name: Network Camera
• Model: V720
• Power Supply: Standard electrical outlet
• Connectivity : WiFi
• Compatibility: Mobile phone application (V720 app)

Product Usage Instructions

Client Downloading
Scan the QR code or search for V720 on the mobile phone application store to download and install the V720 app.

Add Device:

1. Insert the device into the power supply, and the blue indicator light will flash slowly.
2. Long press the Reset button to reset the device; the blue indicator light will flash quickly.
3. Select or enter the WiFi account and password for the connection.

AP Mode:

1. Insert the device into the power supply; the blue indicator light will flash slowly.
2. Long press the Reset button.
3. Return to the V720 app, and refresh the dropdown list until the device displays a successful short-range mode connection.

Device Function Explanation:

1. Open the V720 app and wait for a new device discovery pop-up window.
2. Click to bind the device (If no pop-up window, click + on the homepage to add a device).
3. Wait for successful device binding.

Matters Needing Attention:

1. Avoid using the product in excessively wet environments.
2. Avoid positioning the product close to the glass, white walls, or reflective objects to ensure optimal picture quality.
3. Install the product within the WiFi signal coverage range and away from signal interference sources like microwave ovens.

Thank you for purchasing this product. Please read this manual carefully before using it and keep it in a safe place.

USING INSTRUCTION

Client downloading
Please scan the lower (right) QR code, download and install the “v720” app, or search for “V720” [g in the mobile phone application store to download and install.

Device function explanation

Add device

1. According to the following diagram, insert the device into the power supply and the blue indicator light will flash slowly. Long press the Reset button to reset the device and the blue indicator light will flash quickly.
2. Open the “V720” app, wait for the discovery of a new device pop-up window, and click to bind the device. (If there is no new device pop-up window, please click the “+” in the upper right corner of the homepage to add a device)
3. Select or enter the WiFi account you want to use and fill in the password
4. Wait for the device to be bound successfully.

AP mode

1. According to the following diagram, insert the device into the power supply and the blue indicator light will flash slowly. Long press the Reset
2. Mobile phone turn on the WIFI and connects to the WIFI hotspot starting with “NAX_”.
3. Return to the “v720” app and refresh the dropdown list, when the device displays that means the short-range mode connection is successful.

Matters needing attention

1. The applicable working temperature of this product is -10°C~50°C. Please do not use this product in an environment where the temperature is too high or too low.
2. This product is a precision electronic product. Please do not use this product in an environment that is excessively wet or may cause water to
3. To better use this product, please avoid the front and side of the lens close to the glass, white wall, and other reflective objects, to avoid the picture being bright near and dark in the distance or whitish.
4. Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible in a location with a better Wi-Fi signal, and try to install it far away from the microwave oven or other locations that may affect the signal.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FAQ

• Q: Can I use this camera outdoors?
  • A: It is recommended to use this camera indoors or in sheltered outdoor areas to prevent exposure to extreme weather conditions.
• Q: How can I reset the device?
  • A: Long press the Reset button on the device to reset it.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>