LMHOME T3 Gps 4G Tracker Locations Tracking User Manual

: June 2, 2024
: LMHOME

Table of Contents

LMHOME T3 Gps 4G Tracker Locations Tracking User Manual
Preface
Main functions
Initialization
Authorization
EXCESSIVE SPEED ALARM
MOVEMENT ALARM
Set APN
IP and port configuration
FCC
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LMHOME T3 Gps 4G Tracker Locations Tracking User Manual

Preface

Thank you for purchasing the tracker. This manual shows how to use the device smoothly and correctly. Be sure to read this manual carefully before using this product. Please note that specifications and information are subject to change without notice in this manual. Any changes will be integrated into the latest version. The manufacturer assumes no responsibility for any errors or omissions in this document.

In short

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and track any remote target via SMS or Internet

of the parcel	Specifications
Dim.	704520MM
Weight	103 g
Network NetPoulSafe	GPRS
Tape	850 / 1900Mhz
GSM chip	MTK6261D
GPS chip	Ublox 7020
GPS sensitivity	-159dBm
GPS accuracy	5m

Time To First Fix

Main functions

GSM quad-band frequency;
Rea-time tracking via SMS/GPRS
Low battery alarm;
Geo-fence alarm;
move the alarm
Add intelligent power saving mode
Add AGPS function, receive GPS signals faster
Ad waterproof and dustproof
patented product
Add roll call placement
Add app set

Notices

GPS tracking can be worked outdoors. Must have mobile phone GSM signal and have GPS signal, it can block GPS satellite signal when there is metal or buildings above the GPS tracker
Make sure your 2g GSM SIM card or compatible 2G GSM network SIM card supports making calls, sending messages, GPRS network. Have money, cancel PIN code

Quick use

Name of accessories

Use mobile phone call the device and hang up or send message “smslink123456” to the SIM card in the tracker and reply real-time latitude and longitude information as follows

Real-time tracking information with response

Lat:22.691789 lon:113.957028: Positioning of latitude and longitude
Speed：000.1: device movement speed. The unit is km/h.
Time: 06/28/18 03:58: Real tracking time, default is London time. You can set a time zone via sms command
Google Link: This is the link to the google map that shows the location of the device.

Replied last time location information. Now it’s LBS location information. no gps signal

smcc:460 sMnc:0 sLac:9786 Cellid:3552 Real-time LBS data.
Time: 06/01/15 00:01 LBS positioning time.

If you received the positioning information as in picture 2, take the GPS tracker to outdoor and Walking, then you can receive satellite signal.

Initialization

Send SMS “begin+password” to the unit, it will reply “begin OK” and initialize all settings to factory default. (default password: 123456) For ex.ample: send SMS “begin123456”, it will reply “begin ok”. (without quotes “” when sending all SMS)

Change your password

Send SMS “password+old password+space+new password” to the unit to change the password. For example: send SMS “password123456 888888” to the unit. If successful, “password OK” will reply to your cell phone from the device tracker.
Make sure you keep your new password in mind, you need to load the software to restore the original setting in case you lose your new password.
Attention: Make sure the new password is 6 digits, otherwise the tracker can’t recognize the password.

Authorization

There are 3 numbers that can be allowed to authorize in the tracker at most

Send SMS “admin+password+space+mobile number” to set an authorized number, other authorized numbers need to be set by the first authorized number, if the number is authorized, the unit will reply “admin OK” via SMS.
Delete Authorization: Send SMS “noadmin+password+space+authorized number” to delete authorized number.

Subsequent localization automatically

Send SMS “upload123456 10” to the tracker device, it will continuously reply geographical information at 10 second intervals. (Set upload interval, range (10-60), the set value must be a multiple of 5.) the unit will reply “upload ok” via SMS.

Tracking In this mode, the user can dial the tracking device to monitor the voice command Send SMS “jt#” to the tracking device of the vehicle terminal, it will reply “SET: ON!” and use the mobile phone calls the device and can monitor

alarms

EXCESSIVE SPEED ALARM

Setup: Send SMS “speed + password + space + 080” to the unit (let’s say the speed is 80km/h), and it will reply “speed OK!”. SMS “speed+80!+Geo-info” to authorized numbers. It will sound an alarm once at 080m intervals.

Cancel: Send SMS “nospeed+password” to deactivate the overspeed alarm. Note: It is recommended to set the speed alarm to no less than 30 km/h. Below that speed; may cause GPS signal range affected by clouds etc.

MOVEMENT ALARM

Set: When the unit stays still in one place for 3-10 minutes, user can send SMS “move+password” to the tracking device. It will reply “move OK”. In case of such movement (default distance is 200m), it will send an SMS “Move123456” along with a Geo-info to the authorized numbers, it will ring at 3 minute intervals.

Cancel: Send SMS “nomove+password” to deactivate the motion alarm.

LOW BATTERY ALARM
SMS format: low battery+password+space+off（or on） Command: low battery123456 off (delete low battery) low battery123456 on (low battery ok)

Vibration alarm
SMS format: “shock+password” send command to tracker: “shock123456”, the unit will reply “shock ok” via SMS. Vibration sensitivity level SMS format: “vibration,3#”, the unit will reply “vibration 3 OK”. (The number can be between 1 and 5, with 1 being the highest sensitivity and 5 being the lowest sensitivity.)

Cancel: send SMS “noshock+password” example: noshock123456, the tracker will reply “noshock ok”

Geo-fence
Setting the electronic fence may limit the range of the device. Once the device works beyond the set range, the device will automatically send the information to the authorized number.

Settings: When the car stays stable for 3-10 minutes in one place, you can send a text message “palisade+password, radius #” to the device to set a limit. Once the device is out of limits, the device will send the text message “stockade! + latitude and longitude” is in the authorization number. Stockade123456, 10# ,10 is the radius, which is 100 meters, and 10 is 1000 meters. Note: Once the limit is exceeded, the device will send an alarm message every 3 minutes (3 consecutive times). Cancel: Send SMS “nostockade+password” to deactivate this function.

Check the status of the vehicle.
Send SMS command “check+password” to the tracking device in the vehicle. For example: Send SMS “check123456” to the tracking device in the vehicle, it will reply after SMS.

Time settings

Send SMS command “time+space+zone123456+space++time” to tracker unit, if successful, it will reply “time OK”
For esample: Send SMS “time zone123456 +8”, +8 is China time zone, if your country’s time zone is less, send SMS “time zone123456 -8”.

Set APN

APN standard for access point name and differs from country to country. For more information about your local APN, ask your local GPRS network operator. 10
Send the tracker an SMS “APN123456 + Space + your local APN” via a mobile phone, and if successful, the tracker will return the message “APN OK”.
For example, send the SMS command “APN123456 CMNET”. If successful, “APN OK” is returned by the tracker in SMS.

Note: 123456 refers to the tracker password and CMNET is the APN of one of the Chinese GPRS network operators (China mobile).

IP and port configuration

Send SMS as below via a mobile phone: adminip+123456+space+IP address+space+port number. If successful, “adminip OK” is returned from the device in SMS.
For example, send SMS command “adminip123456 47.88.137.243 7700” to the tracker device, if successful, “adminip OK” is returned from the device in SMS. (123456 is the default password, 47.88.137.243 is the IP, 7700 is the port).

Web support, site monitoring and APP monitoring

Android version: scan below QR code
ios version: search for “homegps” in the app store

Online tracking

NOTE: You must set the APN first

Platform: http://www.smartgpshome.com IMEI number: on the back of the unit Password: 123456

APP for Android/iOS

Search “homegps” in the Apple App Store/Google Play Store to install applications on your device.
Select the “Sign in via IMEI” server: www.smartgpshome.com IMEI: On the back of the unit Password: 123456

Command

NOTE:

Default device password: 123456)
use mobile phone APP or message the tracker about all set commands

FIRST NAME	COMMAND	EXAMPLE

Set app

| apn123456 apn name| apn123456cmnet
apn123456 apn name user password| apn123456 cmnet cmwap 66666
Set IP/DNS

port

| adminip123456 port IP address|

admin123456 47.88.137.243 7700

|
---|---|---|---
adminip123456 DNS port|

admin123456 w www.smartgpshome.com 7700

INSTRUCTIONS	Example	REPLY
position	smslink123456	Get address
Set the administrator number	admin123456 mobile number	administrator ok
Cancel administrator number	noadmin123456 mobile number	noadmin ok
Set time zone	time zone 123456 local time	Time zone ok
Set time zone (half time zone)	Time zone 123456 8 30	time zone ok
set the displacement alarm	move123456(to save energy, suggest not to open)

Vibration sensitivity level (1-5, 1 is the highest sensitivity and 5 is theminimum sensitivity.)| vibration, 1#| vibration 1 OK
---|---|---
Check the status of the vehicle| Check123456|
FAQ| Instructions / Solutions
---|---
Unable to turn on| Please check whether your device has electricity and charging line to be rechargeable

No GSM signal

| l Check that the SIM card is installed correctly.l Check that the SIM card is a 2G GSM network.

l Cancel the SIM card PIN code

No GPS

| make sure the device can receive GPS signal normally outdoors or take the device walking
No response to SMS command| Incorrect SMS command password or incorrect format. restore factory settings send “begin123456”
No response and no alarm message| Check if the authorized/administrator phone number is incorrect and the SIM card is normal
SMS position OK, unable to position the APP and web platform|

Pls check if the APN is set correctly and find out the correct APN content

The location of the platform is different from the actual location.

|

No location loading time or no GPS signal, response location is last time. If it shows as Pic 2, make sure your device can receive GPS signal normally. Outdoors and take the device walking

---|---

FCC

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference and
This device must accept any interference received, including interference that may cause undesired operation.

This roduct meets government requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and in-depth evaluation of scientific studies. The standards include a substantial safety margin designed to ensure the safety of all people regardless of age or health status.

FCC Radio Frequency Exposure Information and Statement The United States (FCC) SAR limit is 1.6 W/kg averaged over one gram. This GPS Smart Tracker device (FCC ID: 2A55K-LM002) has been tested against this limit HRH. SAR information on this can be viewed online at http://www.fcc.gov/oet/ea/fccid/ . Please use your device’s FCC ID number to search. This device has been tested for typical operations 10 mm from the body. To maintain compliance with FCC radio frequency exposure requirements, the 10mm separation distance should. maintained to the user’s bodies

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.

FCC ID : 2A55K-LM002

Read More About This Manual & Download PDF: