SAHARA GAMING EX360 SERIES Aio Liquid Cooler User Manual
- June 2, 2024
- SAHARA GAMING
Table of Contents
EX360 SERIES
AIO LIQUID COOLER
User Manual
Specifications
Intel Socket LGA775/115X/1366/2011/2066
AMD Socket FM1/FM2/AM2/AM2+/AM3/AM3+/AM4
Product Specifications
Water Block| Dimensions| 62x62x90mm
Material| Copper/Engineering Plastic
Pump| Rated Voltage| 12V
Speed| 2600R.P.M.±10%
Bearing| Ceramic Bearing
Radiator| Dimensions| EX360: 120 x 396 x 27mm
Material| Aluminum
Color| Black
Fan| Dimensions| 120x120x25mm
Voltage| DC 12V
Current| 0.23A±10%
Fan Speed| 1800R.P.M.±10%
Max. Air Flow| 72.2CFM±10%
Max. Air Pressure| 1.98mm/H2O±10%
Noise Level| 32.92dB(A)±10%
Bearing Type| FDB
Connectors| 6Pin + 2510 4Pin PWM
Lead Wire Length| 500mm
LED| ARGB
Accessories:
EX360 Installation Diagram
- Fix the fan onto the radiator;
- Fix the radiator with the fans onto the case.
Intel Platform Installation
- Check the Intel metal back plate and the motherboard socket.
- Place the back plate screw to the back plate with a plastic gasket between it and the motherboard, then pass the back plate screw through the motherboard to its obverse side.
- Hexagonal nut onto the back plate screw from the obverse side of the motherboard. Plastic gasket between the motherboard and every hexagonal nut.
- Apply the thermal paste on the CPU surface.
- Insert the Intel bracket to the side of water block with “Intel” upwards.
- Tear off the protective sticker from the copper base of the cold plate and install the cold plate on the CPU surface and screw with spring nut (put a metal gasket between every spring nut and the Intel bracket). Make the copper bottom close to the CPU surface and lock the spring nut tightly and flat.
Intel Platform LGA 2011/2066 Installation
- Twist the 2011 double-headed screw to every hole on the motherboard by short threaded end (as below).
- Apply the thermal paste on the surface of CPU.
- Tear off the protective sticker from the copper base of the cold plate and install the cold plate on the CPU surface and screw with spring nut (put a metal gasket between every spring nut and the Intel bracket). Make the copper bottom close to the CPU surface and lock the spring nut tightly and flat.
Intel/AMD Bracket Installation
- Select the corresponding bracket to the motherboard type (Intel/AMD) with “TOP” upwards. Installation is as below.
- The bracket can be pushed into the card slot directly. No screws are needed.
AMD Platform Installation
- Select the AMD metal back plate to the motherboard socket (FM1/FM2/AM2/AM2+/AM3/AM3+/AM4).
- Place the back plate screw to the back plate with a plastic gasket between it and the motherboard, then pass the back plate screw through the motherboard to its obverse side.
- Hexagonal nut onto the back plate screw from the motherboard’s front side. Plastic gasket between every hexagonal nut and the motherboard.
- Apply the thermal paste on the CPU surface.
- Insert the AMD bracket to the side of water block with “AMD” upwards.
- Tear off the protective sticker from the copper base of the cold plate and install the cold plate on the CPU surface and screw with spring nut (put a metal gasket between every spring nut and the Intel bracket). Make the copper bottom close to the CPU surface and lock the spring nut tightly and flat.
Cable Connection
Standalone ARGB Controller Installation Guide
ARGB Controller & Motherboard SYNC installation Guide
https://www.facebook.com/SaharaGaming-105487447588390/?modal=admin_todo_tour
SaharaGaming®
support@saharagaming.com.tw
www.saharagaming.com.tw
2009-2021 SaharaGaming.
All rights are reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>