Bestway 58499 Power Steel Rectangular Above Ground Pool Set User Manual
- May 15, 2024
- Bestway
Table of Contents
Bestway 58499 Power Steel Rectangular Above Ground Pool Set
Specifications
| Specification | Details |
|---|---|
| Diameter of the filter | 320 mm |
| Effective filter area | 0.075 m2 (0.81 ft2) |
| Maximum operating pressure | 1.58 Bar (23 PSI) |
| Sand filter operating pressure | 0.56 Bar (8 PSI) |
| Maximum water temperature | 35°C |
| Sand | Not included |
| Sand Size | #20 silica sand, 0.45-0.85 mm |
| Sand content | Approximately 20 kg |
Product Usage Instructions
Safety Instructions
- Keep these instructions for future reference.
- Do not dispose of electrical products with household waste. Please recycle where facilities are available. Contact your local government or retailer for recycling advice.
Assembly Instructions
- Refer to the provided manual for detailed assembly instructions.
- Ensure all parts are included before starting assembly.
- Follow the step-by-step guide to correctly assemble the zandfilter.
Operation Instructions
- Connect the zandfilter to the appropriate water source.
- Ensure the zandfilter is placed on a stable and level surface.
- Adjust the settings as per the manual to achieve optimum filtration.
- Monitor the pressure gauge to ensure proper operation.
Maintenance Instructions
- Regularly backwash the zandfilter to remove trapped debris.
- Check and clean the filter media as recommended by the manufacturer.
- Inspect for any leaks or damage and address promptly.
Component Overview
Take a few minutes to familiarize yourself with all the parts before
assembling the sand filter.
Assembly Instructions
Assembly instructions include careful unpacking, correct orientation of the
filter during installation, and specific steps for setup and connection to the
swimming pool.
Operating Instructions
Operating instructions cover the timer settings, functions of the control
valve, and safety precautions to prevent damage and injury.
Maintenance and Cleaning
Maintenance instructions emphasize the importance of regular checks and cleaning to ensure proper functioning and longevity of the sand filter.
Troubleshooting
Common problems, possible causes, and solutions are provided to assist in resolving issues that may arise with the sand filter.
Disposal Instructions
Electrical products should not be disposed of with household waste. Please recycle where facilities are available. Contact your local authority or retailer for recycling advice.
Keep these instructions for future reference. If you lose the instructions, contact Bestway or find them on the website: www.bestwaycorp.com.
Additional Notes
This product is not intended for commercial use. Read the instructions carefully and keep them for future reference.
For full instructions, diagrams, and additional information, please refer to the original product manual.
Please note that the actual text and diagrams within the provided images contain more detailed safety instructions, assembly steps, operating procedures, maintenance guidelines, and troubleshooting tips that are not fully transcribed here. For the complete information, it is recommended to refer to the original product manual.
FAQ
Q: Where can I find replacement parts for the zandfilter?
A: Visit www.bestwaycorp.com/support
for information on spare parts and assistance.
What should I do if the zandfilter is not operating correctly?
Refer to the troubleshooting section in the manual or contact customer support for assistance.
What should I do if sand is coming out of the swimming pool?
Check if the sand is too fine and ensure that the #20 silica sand is used as recommended.
What if there is no water turnover?
Check if the stoppers have been removed and verify that the control valve is not set to the Closed position.
What should be done if the filter pressure is too high?
Backwash the filter, check and replace the sand if necessary, and make sure the outflow valve is functioning properly.