DANPHONE Futronic MKII Software User Guide
- May 15, 2024
- DANPHONE
Table of Contents
PC Report
User’s Manual 
Version 8 August
2023
This manual supports software
version 610.0022.009
INTRODUCTION
Futronic PC Report Software allows you to:
– View all test results and save them on a PC
– Create AIS, EPIRB and EPIRB-AIS reports
– Check for updates.
How to download and install
- Download Futronic MKII PC Report from Danphone’s website: (Download here)
- Open the zipped file.
- Double click on the file installation guide and follow the instructions.
- Once installed, the PC program will open a 3 tabled dialogue box on your PC Screen
File – Settings – About – Check for updates
The tabs are explained on the following pages. 
Automatic check for updates
at startup.
If you do not want automatic check, you can check
for updates by pressing the tab Check for Updates. If there is a new update,
this dialog box will appear. Click ‘OK’ and follow the instructions on the
screen. Connect Futronic MKII to your PC Via USB cable and turn on the test
box.
If the Futronic test box is not connected to the PC, this pop-up appears.
Check the connection between the test box and PC. 
In the tab About see which
software version you have. 
The Get List tab provides access to all the tests
and test results stored in the test box.
The list is indexed by date with the latest test on top. 
Choose the desired MMSI number and date, the tests from
this date will appear in the window in the middle as seen below.
Please note that you can only see test results from the test box that are
connected to the PC.
Choose the desired test data and the test results
are displayed in the window at the right-hand side. 
If the software does not allow you to automatically create reports, you can
save the results by pressing Save.
This allows you to save the results on a PC and bring them into your own rest
report format if needed.
Create EPIRB Report
Click on the desired EPIRB test results. You will now see the test results at
the right side. 
You can choose ‘Template’, ‘Destination’ and
‘Generate’. By pressing ‘Template’ this dialog box appears. 
Choose between 5 IMO approved EPIRB report templates.
Press ‘Destination’ to choose where to save the EPIRB report on your PC.
Press ‘Generate’ and the report will se saved at the chosen destination and a
new window will open with the EPIRB report.
EPIRB Test Report with Danphone template
Fill in the last information and your EPIRB report is
ready.
Create AIS Report
Click on the desired AIS test results. You will now see the test results at
the right side. 
By pressing ‘Destination’ you can choose where to
save the AIS report on your PC.
Choose between 8 IMO approved AIS test report templates to create a report.
When ready to create your AIS report press ‘Generate’ and
a report will be saved at the chosen destination on your PC.
A new window will open with the AIS report.
Fill in the last information and
your AIS report is ready.
Create EPIRB-AIS Report
Select the EPIRB-AIS beacon in the right window.
The data for the select
EPIRB-AIS is shown in the new window.
Select the template for Danphone
EPRIB-AIS and generate the EPIRB-AIS report. 
Tagholm 16. DK-9490 Noerresundby. Denmark
Tel: +45 96 44 44 44, Fax: +45 96 44 44 45
E-mail: danphone@danphone.com,
www.danphone.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>