KARCHER T 12-1 Non-Tilting Constructed Dry Vacuum Cleaner Instructions

: June 4, 2024
: Karcher

KARCHER T 12-1 Non-Tilting Constructed Dry Vacuum Cleaner

General notes

| Read these original instructions and the enclosed safety instructions before using the device for the first time. Act in accordance with them. Keep both books for future reference or for future owners.
---|---

If the operating instructions and safety instructions are not observed, the device can be damaged and dangers could arise for users and other persons.

Notify the dealer immediately in the case of shipping damage.
Check the package contents when unpacking for missing accessories or for damage.

Environmental protection

| The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
---|---
| Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential threat to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.
---|---

Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.com/REACH

Intended use

_**WARNING**_
Health risk
Inhalation of dusts that are harmful to health Do not use the device for vacuuming up dusts that are harmful to health.

**ATTENTION**
Damage to the device
Short-circuit due to high levels of humidity Only use and store the device indoors. This hard floor vacuum cleaner for carpets is intended for dry cleaning floor and wall surfaces.

This hard floor vacuum cleaner for carpets is intended for dry cleaning floor and wall surfaces.
The floor nozzle supplied is not suitable for use on carpets.
This device is suitable for commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices, and rental companies.

Description of the device

Illustration A
① Fleece filter bag
② Suction hose port
③ Suction hose
④ Type plate
⑤ Cable hooks
⑥ Carrying handle
⑦ Mains cable
⑧ Suction head
⑨ Suction head lock
⑩ Steering roller
⑪ Dirt receptacle
⑫ Main switch
⑬ Floor nozzle
⑭ Telescopic suction pipe adjustment
⑮ Telescopic suction pipe
⑯ Mains plug fastener
⑰ Mount for floor nozzle
⑱ Cover lock
⑲ Bar cover
⑳ Suction control (variable)
㉑ Angle piece
㉒ Filter casing
㉓ Exhaust filter
㉔ Main filter basket
㉕ Motor protection filter

Colour coding

Control elements for the cleaning process are yellow.
Control elements for maintenance and servicing are light grey.

Preparation

Unpack the device and install the accessories.
Illustration B

Initial startup

Check if the main filter basket is inserted in the device.

Operating modes

Operation with the fleece filter bag or paper filter bag (special accessories)
Operation without the filter bag

Installing the filter bag

Unlock and remove the suction head.
Remove the main filter basket.
Connect the fleece filter bag or paper filter bag (special accessories).
Insert the main filter basket.
Fit and lock the suction head.

Operation

Switching on the device

Connect the mains plug.
Switch on the device at the main switch.

Adjusting the suction power

Regulate the suction power on the suction control (variable).

Cleaning mode

Perform cleaning.

Switching off the device

Switch off the device at the main switch.
Pull out the mains plug.

Each time after use

Empty the container.
Vacuum off the inside and outside of the device and clean with a moist cloth.

Transport

_CAUTION_
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transportation.

When transporting the device in vehicles, secure it to prevent it from slipping or overturning in accordance with the respective valid guidelines.

Storage

_CAUTION_
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
The device may only be operated indoors.

Care and service

DANGER

Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.

Cleaning the main filter basket

_ **ATTENTION**_
Danger from wet main filter basket
Risk of damage to the device Never insert the main filter basket when wet. 1. If necessary, clean the main filter basket (washable) under running water.

Replacing the exhaust filter

Exhaust filter: Change once a year

Unlock and remove the cover.
Remove the filter casing.
Remove the exhaust filter from the filter casing.
Insert a new exhaust filter in the filter casing.
Insert the filter casing.
Install and lock the cover.

Replacing the motor protection filter

Unlock and remove the suction head.
Remove the motor protection filter.
Fit the new motor protection filter.
Fit and lock the suction head.

Troubleshooting guide

DANGER

Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device stops during operation

The motor thermo-protector has triggered

Change the fleece filter bag or paper filter bag (special accessories).
Replace the motor protection filter.
Replace the exhaust filter.
Check all parts for clogging.
Allow the engine turbine to cool for approx. 30-40 minutes. Switch on the device.

Suction turbine does not start up

Check the socket and the power supply fuse.
Check the mains cable and the mains plug of the device.
Switch on the device.

Suction power decreases

Remove any blockages from the suction nozzle, suction pipe or suction hose.
Change the fleece filter bag or paper filter bag (special accessories).
Clean the main filter basket under running water and dry.
Position/lock the suction head correctly.
Replace the defective suction hose.
Replace the motor protection filter.

Escaping dust when vacuuming

Change the fleece filter bag or paper filter bag (special accessories).
Check the fleece filter bag or paper filter bag (special accessories) is fitted correctly.
Position/lock the suction head correctly.
Insert the undamaged main filter basket.
Insert the motor protection filter correctly.

Customer Service department

If the malfunction cannot be corrected, the device must be checked by the Customer Service department.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.
(See overleaf for the address)

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.

EU Declaration of Conformity

We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This declaration is invalidated by any changes made to the machine that are not approved by us.
Product: Dry vacuum cleaner
Type: 1.355-xxx

Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2009/125/EC
2011/65/EU
2014/30/EU

Harmonised standards used
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 60312-1: 2017
EN 60335-1
EN 60335-2-69
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
National standards used
–
Commission Regulation(s)
666/2013
The signatories act on behalf of and with the authority of the company management.

Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 – 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2020/10/01

Technical data

		Kärcher T 12/1

Dimensions and weights
Mains voltage| V| 220-240
Phase| ~| 1
Power frequency| Hz| 50-60
Protection class| | II
Rated power input| W| 700
Device performance data
Tank content| l| 12
Air quantity (max.)| l/s| 43
Air quantity (max.)| kPa (mbar)| 22,0 (220)
Dimensions and weights
Length x width x height| mm| 410 x
315 x
340
Typical operating weight| kg| 6,2
Diameter of the suction hose| mm| 35
Ambient conditions
Ambient temperature (max.)| °C| +40
Determined values in acc. with EN 60335-2-69
Sound pressure level LpA| dB(A)| 60
Uncertainty KpA| dB(A)| 2
Sound power level LwA| dB(A)| 72
Hand-arm vibration value| m/s2| <2,5
Uncertainty K| m/s2| 0,2
Mains cable
Power cord type| mm2| H05VVF 2×1,0
Part number (EU)| | 6.650- 623.0
Cable length| m| 15

Subject to technical modifications.

**THANK YOU!**

www.kaercher.com/welcome

| www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212| QR-Code
---|---|---