TECWARE INFINITYM2 Dual Tempered Glass Matx Case User Guide
- May 15, 2024
- TECWARE
Table of Contents
TECWARE INFINITYM2 Dual Tempered Glass Matx Case
Specifications
| Type | Specification |
|---|---|
| Motherboard Support | mATX, ITX |
| Dimensions | 318(L) x 210(W) x 398(H) mm |
| 3.5″ HOD Drive Bay | 1 |
| 2.5″ SSD Drive Bay | 1 |
| Expansion Slots | 4 |
| Maximum GPU Length | 310mm |
| Maximum CPU Cooler Height | 165mm |
| Maximum PSU Length | 160mm |
Panel Removal
- Remove the 2 screws at the back and then slide the TG out as shown.
- Remove the side panel and remove the screw as shown.
- Slide the front TG Panel following this direction.
Front Panel 1/0 Connections
BUTTONS AND ACTIVITY LIGHTS
- These cables are connected to the motherboard for the power button ( power sw ), reset button, HDD LED, and power LED ( P+ / P- ).
HD AUDIO
- This connector attaches to your sound card or motherboard and is used to provide the front panel mic input and headphone output.
USB 3.0 CONNECTOR
- This cable connects to the USB 3.0 header on the motherboard to enable the front USB 3.0 ports.
Component List
Motherboard Installation
SSD I HDD Installation
GPU & PSU Installation
CPU Cooler/ Fan Installation
Package Contents
- 1 x TECWARE INFINITY M2 Case
- 1 x Bag of Accessories
Warranty
1 Year. Please contact your local distributor for support.
Documents / Resources
|
TECWARE INFINITYM2 Dual Tempered Glass Matx
Case
[pdf] User Guide
INFINITYM2, INFINITYM2 Dual Tempered Glass Matx Case, Dual Tempered Glass Matx
Case, Tempered Glass Matx Case, Glass Matx Case, Matx Case, Case
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>