TECWARE F2716IF Prime Gaming Monitor User Guide

TECWARE F2716IF Prime Gaming Monitor

SAFETY PRECAUTIONS

Read and observe the following warnings and information below.

1. Please disconnect the power plug before cleaning the product. It is recommended to wipe the monitor with a clean, soft and dry cloth. If using a damp cloth, kindly ensure that your monitor is dry before connecting the power plug.
2. Do not use alcohol or ammonia-based cleaning agent to clean your monitor.
3. The ventilation openings are at the back of the monitor. Avoid blocking these openings to prevent the monitor from overheating.
4. Avoid placing the monitor near any heat sources such as radiators, heating vents, or any device that produces heat as it may cause a fire.
5. Clean any dust around the pins of the power plug or the power socket with a dry cloth.
6. Do not spray cleaner or any kind of liquid directly onto the monitor’s screen or any part of the monitor.
7. Do not insert any objects into the monitor, especially via the ventilation openings.
8. Always make sure your monitor is placed on a stable, secure and, leveled surface to prevent it from falling and sustaining damage.
9. Unplug your monitor during any extended periods of non-use.
10. Do not place heavy items on the monitor or monitor cables.
11. Do not attempt to disassemble or remove parts from the monitor. Any disassembly or modification not performed by an authorized technician can damage the monitor and cause possible exposure to high voltage electricity, which may lead to severe injury or death.
12. Only use the power cord provided with your product by Tecwaer. Do not use the power cord with other products as a it may result in a fire or electric shock.

PACKAGE CONTENTS

STAND INSTALLATION

1. Open the package, and take out the product with foam still attached, and gently place it on a table or leveled surface.
2. Place the monitor with the screen facing downwards on top of the foam.
3. Take out the stand stem and insert it into the corresponding slot on the back of the monitor as shown in the picture. Secure the stand onto the monitor with the screw provided.
4. Take out the stand base and insert into the bottom of the stand stem as shown in the picture. Secure the bottom with the screw provided.
5. Cover the gap on the back of the monitor stand with the stand cover provided. Attach the stand pad to the bottom of the stand base as shown in the picture.
6. Gently lift your monitor to an upright position.

PRODUCT OVERVIEW

1. Control buttons
2. Power button
3. Input and output ports
4. Anti-theft lock

CONNECTIVITY OPTIONS

CONTROL BUTTONS

•    Enters sub menus

•    Select menu items

2| •    Activates display input menu

•    Cycle display input channel

•    Cycle on-screen crosshair

•    Returns to the previous menu (in OSD menu)

•    Exits OSD menu

3| •    Activates on-screen crosshair

•    Up/Increase adjustment

4| •    Activates brightness adjustment menu

•    Down/Decrease adjustment

5| •    Powers on/off the monitor

ON-SCREEN DISPLAY

ON-SCREEN DISPLAY (OSD)

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M button.

1. Press M to enter the OSD screen.
2. Press to browse functions.
   • Highlight the desired function and then press M to enter the sub-menu.
   • Press to browse sub-menus then press M to highlight the desired function.
   • Press to adjust an option and then press M to confirm the settings and return to the previous sub-menu.
3. Press A to return to the OSD screen.

OSD MENU FUNCTIONS

the picture of source.
V.Position| Setting Locked| Adjust vertical position of the picture of source.
Clock| Setting Locked| Adjust picture clock to reduce the vertical line noise.
Phase| Setting Locked| Adjust picture phase to reduce the level of noise.
Image Ratio| Wide, 4:3| Set aspect ratio
Color Setup| Color Temp.| User, Cool, Normal, Warm| Adjust color temperature
Red| 0-100| Customize RGB components
Green| 0~100
Blue| 0-100
Low Blue Mode| Off, Weak, Medium, Strong| Set the blue light filtering level
OSD Setting| Language

17

| | Set OSD language
---|---|---|---
OSD H.POS.| 0~100| Adjust the OSD horizontal position
OSDV.POS.| 0~100| Adjust the OSD vertical position
OSDTimer| 5~120| Adjust how long the OSD remains open after non-use
Transparency| 0~100| Set the OSD overall transparency
Reset| Auto Config| Setting Locked| N/A
Auto Color| Setting Locked| N/A
Reset| N/A| Reset monitor configurations to default
Extra| Input Select| HDMI, DP| Changetheinputsource
Mute| Off/On| Mute outgoing audio
Volume| 0~100| Adjust audio volume
Freesync| Setting Locked| N/A
Light Effect| Off/On| Turn the monitor LED back light on/off

SPECIFICATIONS

HDMI 1.4: 1920×1080@120Hz

Backlight| LED
Brightness| 250 cd/m2
Contrast Ratio| 1000:1
Response Time| 1ms
Refresh Rate| 165Hz
Ports| DP 1.2 x 1, HDMI 1.4 x 1, USB x 1, Audio x 1
Power| DC 12V 2.6A/32W
VESA Compatibility| 100x100mm
Dimension (W x D x H)| 601.6 x 200 x 371.7mm
Weight| 5.0kg (Net)/ 5.3kg (Gross)
Low Blue Light| Yes
Flicker-free| Yes
Zero Bezel Design| Yes
High Dynamic Range| Yes

www.tecware.co

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>