VGN V98PROV2 V98 Pro V2 Mechanical Keyboard Instruction Manual

VGN V98PROV2 V98 Pro V2 Mechanical Keyboard Instruction Manual

Battery Indicator Light

• When the battery voltage is lower than 3.3V, the keyboard Spacebar indicator light will flash red, indicating that you need to charge it
• When USB charging is plugged in, hold Fright CTRL, and the keyboard Spacebar indicator will turn blue to indicate charging and green when fully charged.
• When not plugged into USB, hold Fhi+right CTRL, and the keyboard Spacebar Indicator wil turn green for high battery lever yellow for medium battery level.

Lighting Customization Function

• Press FN+-to access custom back light mode, supporting only one set of custom memory lighting.
• Custom light editing. After pressing FN+ to access custom bacdight mode, press FN+ again to start editing the lighting. At this point, the key’s lighting begins to blink. Switch colors by pressing FN-right, and the key’s lighting color starts to change. After selecting the lighting color, press the key you want to illuminate to start editing the lighting. After editing is completed, press FN again to save the edited lighting.

FN Combination function

maximum speed is reached
—| Slow Down Lighting Speed
PGUP| Switch to the previous lighting effect| Default RGB streamer
PGDN| Switch to the next lighting effect|
Space| Color switch| Space LEO displays colorful !Omit effects. Other LE0s display tingle color constant lighting Press space again to Wee RG8 color cosplays. Press other keys. Select the cores pond entangle color display
WIN-L| Lock WIN| Key indicator LED lights in white
S| Switch to Mac mode|
A| Switch to Windows mode|

Mode Setting and Pairing

• 3-mode switch controls USB, BT, 2.4GHz modes! Toggle the switch to the corresponding position to enter the corresponding connection model
• After 3 minutes of inactivity, the keyboard automatically enters the first-level sleep mode. During this time, the keyboard backlight turns off, and Bluetooth or 2.4GHz remains in a connected state. Pressing a key will wake it up. After 10 minutes of keyboard inactivity, it enters the second-level sleep state. In this state, the wireless connection of the keyboard is disconnected. Pressing a key wakes up the keyboard and automatically reconnects. Normal key output is possible only after successful reconnection.
• The working current is less than 320MA, the current of the first level sleep mode is less than 500UA, the current of the second level sleep mode is less than 30UA

We support mode switching, pairing and coding in wireless mode

• Bluetooth 1/2/3/2.4GHz corresponds to FN+1/2/3/4 (short press to switch, long press to pair).
• Bluetooth has independent indicator lights: fast flashing during pairing, slow flashing during reconnection. After successful connection, the Bluetooth independent indicator light will stay on for 2 seconds before returning to the overall backlight effect. If pairing is unsuccessful for 1 minute, it enters sleep mode. If reconnection is unsuccessful for 20 seconds, it enters sleep mode

FCC Warning

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>