VGN N75 Pro Mechanical Keyboard User Manual

: June 15, 2024
: VGN

Table of Contents

Button description
Windows/MAC mode
Power management
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**VGN N75 Pro Mechanical Keyboard User Manual

**

Button description

At the: rotate left and right to adjust the volume, and press Mute.
Indicator light:
CAPS indicator: Case-sensitive, always on when in uppercase status.
WIN indicator: distinguish ScrollLock status, always on when turned on 3.2.4G indicator: distinguish 2.4G indicator status, always on when connected, flashing when paired
Bluetooth indicator: Distinguish the status of the Bluetooth indicator, which is always on when connected and flashes when paired.
WIN key: WIN key, cannot be used when locking the WIN key, and is the option key in MAC mode.

Windows/MAC mode

FN + A Switch to Windows mode.
FN + S switch to MAC mode, F1-F12 buttons are multimedia buttons, FN + F1-F12 are regular inputs of F1-F12.
When connecting to the Windows system, if switching to MAC mode, the WIN and ALT keys will be swapped, and F1-F12 are the multimedia key.

Quick start

2.4G wireless connection

Remove the receiver from the tank.
Plug the receiver into your computer’s USB port.
Turn the mode switch on the bottom to 2.4G.

Bluetooth connection

Turn the mode switch on the bottom to Bluetooth mode.
Long press FN + number keys 1, 2 or 3 to start pairing. The indicator light flashes when pairing.
It supports pairing up to 3 devices. Press FN + numeric keys 1, 2 or 3 to switch devices.

Wired connection

Plug the USB-C cable into the port of the keyboard.
Connect the cable to the computer.
Turn the mode switch on the bottom to the middle.

Power management

Power check

In 2.4G/Bluetooth mode, the power level can be checked through FN + Backspace.
The power percentage can be viewed on the lamp with the number keys.
100% -50% battery: the number keys are all bright green.
50% -30% power: 1~ 5 keys button bright yellow.
20% or less power: 1~ 3 keys button bright red.

Low battery alert
The number keys flash all red when the battery is low.

Charging method
In any mode, connecting the keyboard to the computer through the equipped data cable will charge the keyboard.

When the data cable is connected, you can check the charging status through FN

Backspace. The numeric keys are all bright blue to indicate that they are charging, and the numeric keys are all bright green to indicate that they are fully charged.

Sleep function

In Bluetooth and 2.4G mode, the keyboard enters first-level sleep after 2 minutes of rest, and the backlight is turned off; after 30 minutes of rest, it enters second-level sleep, and Bluetooth/2.4G is disconnected. Press any key to connect back immediately.

FN combination key

Multimedia shortcut key combination

FN

I

| PrintScreen button
---|---|---
O| Scroll button
P| Pause button
WIN| Lock the WIN key, the WIN key cannot be used when locked
| 1| Bluetooth device 1, press short to switch, press long to pair for 3 seconds
| 2| Bluetooth device 2, press short to switch and long to pair for 3 seconds
| 3| Bluetooth device 3, short press to switch, long press for 3 seconds to pair
| 4| Long press for 3 seconds to pair the 2.4G receiver
| Backspace| Check battery

Lighting efficiency control

|

Space

Light effect description RGB version

Name

| Adjustable content| Description
---|---|---
| Brightness| Speed| Color| Direction|
---|---|---|---|---|---
Always bright| ✔| | ✔| | Full keyboard light is always on display
Go with the flow| ✔| ✔| ✔| ✔| Wave-like light, flowing horizontally tothe left or right
Judgment ofLight| ✔| ✔| | | Full keyboard light solid color display,and slowly change color
Breathe| ✔| ✔| ✔| | The brightness of the full keyboard lightvaries according to the breathing curve
Colored cloudsflying| ✔| ✔| ✔| ✔| The light appears to flow like a cloud andflow horizontally
Peak turn| ✔| ✔| ✔| ✔| Lights flow around the center of thekeyboard
A ripple| ✔| ✔| ✔| | After triggering the button, spread thedisplay around the trigger point
Snow without atrace| ✔| ✔| ✔| | After triggering the button, the lightcomes on and gradually goes out
Run away from the dust| ✔| ✔| ✔| | After triggering the button, spread to both sides with the trigger point as thecenter
A hundredflowers bloom| ✔| ✔| ✔| | Button display with colorful or singlecolor flashing display
Undercurrentsurging| ✔| ✔| ✔| | Random combination of lights, surgechanges
Meteors chasingthe moon| ✔| ✔| ✔| | The lights follow the colorful and gradualchange display, chasing each other
Dapeng spreadsits wings| ✔| ✔| ✔| | The light simulates Dapeng spreading itswings and waving up and down
The stream isendless| ✔| ✔| ✔| | The light is interspersed with the surgedisplay from left to right line by line
The rain is falling| ✔| ✔| ✔| | The lights simulate rain, falling from topto bottom
Both right and left| ✔| | ✔| | The light swings left and right, and the speed increases with the speed of thebutton
United as one| ✔| | ✔| | The color of the light deepens with thespeed of the button
Fast passion| ✔| | **** ✔| | The light spreads and closes in the centerof the keyboard, and the speed increases with the speed of the keys

Common problems

Why is my WIN key not workin.

When the WIN key is locked after pressing the FN + WIN key, the WIN key cannot be triggered for use. At this time, the WIN indicator on the keyboard is on, and it can be unlocked after pressing FN + WIN again.

Why is my WIN key and ALT key swapped, F1-F12 does not respond or becomes a function key

After pressing FN + S, the keyboard will switch to MAC mode. At this time, under the Windows system, it will appear as the WIN key and the ALT key are swapped, and F1-F12 becomes the function key; press FN + A to switch back to Windows mode.

I want to customize keys, use macro functions, modify more RGB lighting effects, what should I do.

Download the latest driver from VGN.CN/dirve official website, you can customize keys, edit
macros and modify RGB lighting effects through the driver software, and experience the full keyboard function.

Other:

Driver download and firmware upgrade, official account QR code

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement:

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.