KUNYOONG IBC CO HAHA3 Wireless Voice Amplifier User Manual
- May 15, 2024
- KUNYOONG IBC CO
Table of Contents
KUNYOONG IBC CO HAHA3 Wireless Voice Amplifier
Specifications
- Model: HAHA3 (KHA-670T/R)
- Manufacturer: Kunyoong IBC Co., Ltd.
- Features:
- Clear hearing with digital wireless sound amplifying function
- Suitable for public places
- Non-intrusive design for ears
- Rechargeable battery in both transmitter and receiver
- UV sterilization function for cleanliness
Product Usage Instructions
Transmitter Operation
- Power ON the transmitter through the ON/OFF switch.
- If using the embedded microphone, keep it close to the speaker.
- If using the pin microphone, attach it to the transmitter.
Receiver Operation
- Press the volume switch on the left side to turn it on/off (LED light indicates status).
- Adjust the volume to your preference.
- Select listening mode via the low-cut switch on the right side.
- Turn off both transmitter and receiver when not in use for a long time.
Charging and Sterilization
- The red color indicates charging in progress.
- The blue color indicates charging completion.
- Charge in power OFF status.
Important Notices
- Avoid placing near flame, moisture, or corrosive gas.
- Avoid excessive impact or vibration.
- Do not disassemble the product.
- Clean with a dry cloth; avoid alcohol or other inflammables.
Frequently Asked Questions (FAQ)
Q: How far can the transmitter and receiver be placed from each other?
- A: Keep the distance within 10m for optimal operation, with a maximum range of 30m. Obstacles may affect performance.
Q: What should I do if I hear a beep sound when the receiver approaches the transmitter?
- A: This occurs when the receiver is too close to the transmitter while it’s powered on. Maintain a safe distance to avoid interference.
Summarize and Feature of Product
Summarize
- It is Wireless public use hearing assistive aids, that can be used together with old people or hearing-impaired people in the facilities & places that many people use.
- When general hearing aids don’t have the hearing effect because of the noise etc. of public facilities, this can be used very usefully.
- So that all people use it easily, put it on your ear like a telephone receiver (without put inside of the ear), then you can hear clear sound and speak quietly.
- You can use HAHA as spectacles for the aged glasses that are installed in general facilities.
- When don’t use it, you can put it on a Sterilizing charger/Transmitter immediately to use many other people.
- This charger includes a UV sterilizing function, so people can use it cleanly.
Feature
- Provide clear hearing by using a digital wireless sound amplifying function.
- Easily use in public places.
- Using ahead to ears not to insert.
- A rechargeable battery is equipped with a transmitter and receiver.
- UV sterilization function for cleaning.
Contents
Appearance and Name
Receiver
Normal Operation
- Transmitter Operation(check through Power indicator lamp)
- Using an embedded microphone(A little noisy) Power ON through the ON/OFF switch on the transmitter (When the user touches S/W for 2sec ON/OFF function operates)
- Caution : when using a microphone embedded in a transmitter, close to the speaker.
- Using Pin microphone(Much noisy)
- Put the pin mic on the transmitter, Power ON through the ON/OFF switch on the transmitter
- Press the volume switch on the left side of the receiver to turn it on and press it again to turn it off. (LED light on/off)
- User control volume to fit the user
- Listening can be selected via the low-cut switch on the right side of the receiver.
- When not in use for a long time, turn off the transmitter and receiver and store them.
- If you put the receiver on the transmitter while the power of the transmitter and receiver is on, the power will automatically turn off and if you lift it again, it will automatically turn on in the previous mode
< Distance between transmitter and receiver>
- Please keep the using distance within 10m between transmitter and receiver. (Max 30m)
- If you are so far away from the speaker, the equipment cannot operate.
- Also if there is an obstacle between two users, occur same phenomenon.
- CAUTION Receiver approaches the transmitter in the POWER ON state, Occur “Beep” sound
- Put receiver to the transmitter as to charging, simultaneously sterilization function is operated (Red color when charging done.)
- Please charge in power OFF status.
Notice
- Please avoid adjoining the place with flame, moisture, and corrosive gas.
- These cause life-shortening damage.
- Do not have excessive impact or vibration on the product.
- Please do not disassemble do as.
- Clean the goods with a dry cloth, if this is cleaned with alcohol, benzene, or other inflammables, causes harm.
Simple Repair
Please contact the customer service center or manufacturer when you think it is disordered after Checking the following phenomenon.
Phenomenon | Handle |
---|---|
Doesn’t Operation | • When the Power indicator LED doesn’t light on or |
blink, Please recharge and activate it.
Little sound| • Please check the Volume control switch of the receiver.
• Please recharge and activate.
Unstable sound| • Please check the distance between the transmitter and
the receiver or obstacle.
Beep sound| • Please check the receiver put on transmitter under on
status.
Not recharging| • Please check the distance between the transmitter and
receiver.
• Please check the Charging adaptor’s input jack.
• Please check the color change of each equipment when they touch each other (Blue Red)
- Red color(charging), Blue color(charging done)
Specification
Receiver-KHA-670R
Sound processing | Digital sound processing |
---|---|
Wireless frequency | 2.4GHz (ISM Band) 2406 MHz-2478 MHz(19CH) |
Max Output | 130dB |
Max amplifying | 46dB |
Operation Power | Lithium Iron (Chargeable : 3.7V) |
Way of Charge | Exclusive charger (Stand type) |
Successive using time | Over 8hours |
DC Input | DC5V / 1A |
Compatibility with Hearing aids | Built-in Magnetic induction signal change |
Size | 54mm(W) X 143mm(D) X 44.5mm(H) |
Transmitter-KHA-670T
Wireless frequency| 2.4GHz (ISM Band)
2406 MHz-2478 MHz(19CH)
---|---
Operation Power| Lithium Iron (Chargeable : 3.7V)
Wireless distance| Within 10m
Way of Charge| AC220V (Input), EX Adaptor (DC5V: Output)
Successive using time| Over 8hours
Size| 86mm(W) X 133mm(D) X 37mm(H)
Warranty
Our product’s warranty period is a year from purchase, We’re compensation for the loss according to the Consumer injury compensation rule.
CASE OF CUSTOMER INJURY | COMPENSATION |
---|---|
WITHIN GUARANTEE PERIOD | AFTER GUARANTEE PERIOD |
DISORDER ON NORMAL USE SITUATION | DISORDER ON NORMAL USE SITUATION WITHIN A |
MONTH AFTER PURCHASE CORE TECHNICAL PROBLEM | EXCHANGE |
OVER 4 TIMES DISORDER FOR THE SAME REASON | EXCHANGE |
NOT AVAILABLE A/S | OVER 3 TIMES DISORDER FOR THE SAME REASON |
A/S | A/S PROVIDED AT A COST |
NOT AVAILABLE A/S | WHEN EXCHANGE IS AVAILABLE |
fixed range depreciation
User’s carelessness| WHEN REPAIR IS IMPOSSIBLE| A/S PROVIDED AT A COST| A/S
PROVIDED AT A COST
AVAILABLE A/S| EXCHANGE GOODS AFTER DEDUCTION OF REPAIR FEE| ACCORDING TO OUR
CRITERIA
When the company lost customers requested goods| Exchange| Exchange after a
fixed range depreciation
The holding period for parts is 5 years from manufacturing.
- Authorized form registration
- Authorized company : Kunyoong IBC
- Manufactured date: 2023.02
- Manufacturer/Country : Kunyoong IBC / Korea
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
The antennas used for this transmitter must be installed to provide a
separation distance of at least all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
- KUNYOONG IBC CO,. LTD.
- RM.1210 Digital Empire Bldg., 1130 Beoman-ro, Geumcheon-gu, Seoul, South Korea
- TEL:02-563-5260 FAX:02-561-5928 E_mail : kunyoong@kita.net
- http://www.kunyoong.com
Documents / Resources
|
KUNYOONG IBC CO HAHA3 Wireless Voice
Amplifier
[pdf] User Manual
2ASP2KHA-670R, 2ASP2KHA670R, HAHA3, HAHA3 Wireless Voice Amplifier, Wireless
Voice Amplifier, Voice Amplifier, Amplifier
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>