toocki HE-058B Bluetooth Headset User Manual
- June 1, 2024
- toocki
Table of Contents
Toocki TWS In-Ear Earphones
User Manual
Please read this user manual carefully before use and keep it properly.
Product Parameters
Brand: Toocki
Name: TWS Bluetooth Earphones
Model No.: HE-058B
Material: ABS
Earphone Capacity: 35mAh
Charging Case Capacity: 400mAh
Rated Voltage: 3.7V
Charging Time: About 1.5 hours
Charging Port: Type-C
BT Version: V5.3
Receiving Distance: About 12m
Weight: Earphones: 8.8g Earphones+Charging Case: 45.8g
*The above data are measured by the toocki laboratory, the actual use will be slightly different depending on the specific circumstances.
Package List
| TWS earphones | x 1 | Lanyard | x 1 |
|---|---|---|---|
| Charging case | x 1 | Earcap | x 2 Pairs |
| Type-C charging cable | x 1 | User Manual | x 1 |
Product Diagram
Earphones User Manual
Power On
- Remove the earphones from the charging case and it will turn on automatically, there with a “Power On” sound. Then the main earphone automatically enters pass-through pairing mode and tries to connect back to the phone.
- Long press the touch area for 3 seconds can also be turned on, there with a “Power On” sound.
Power Off
- Long press the touch area for 6 seconds to turn it off, then the red indicator light flashes 1 times with a “Power Off” sound.
- Put the earphones back into the charging case can be turned off with a “Power Off” sound, and the red indicator light flashes for 1 time.
- After powering on without connecting or disconnecting the Bluetooth connection, if there is no operation, it will automatically shut down after more than 3 minutes, and the red indicator light flashes for 1 time.
Bluetooth Pairing
- After the teft and right earphones pairing successfully, then search for the model name on the phone (HE-058B) and connect. Meanwhile, there will be with a “Connected” sound after pairing successfully.
- After disconnecting the earphones from the phone side, you can reconnect the earphones from the phone side.
- The earphone and cell phone will be disconnected automatically when they are out of the connection distance, and will be connected back automatically when they are back within the connection distance (within 12 meters). If you cannot connect, just tap the touch area for 1 time to connect automatically.
Charging
Earphones charging: Put the earphones into the charging case, then it will
start charging automatically.
Charging case charging: Use Type-C charging cable to connect to the charger.
Definition of LED Lights
-
For Earphones
The color of LED light : Red/Blue
Earphones pairing: Main earphone red and blue light flashing
Earphones connected to the phone: LED light off
Earphones into charging case: Red light on for 10s off -
For Charging Case
The color of LED light : White digital tube
Charging case charge the earphones: Digital tube is always on to show the power level, and the left and right battery columns flashes, off when fully charged
Fully charged: Digital tube displays power level 100
*Charging case power display for numbers 0-100. Earphone power display: battery posts on both sides of the charging case(1 cell corresponds to 25% power, and so on).
Touch Area User Manual
Pause/Play Music
Volume Adjustment
Switch Songs
Call Settings
Wake Up Siri
Using Environment
Working temperature: -10°C~+45°C
Storage temperature: -10°C~+75°C
Reminder
- To protect your hearing, please keep the volume at a normal level. Avoid listening to high-volume music, as it may damage your hearing.
- In extreme outdoor weather conditions, such as thunderstorms, please refrain from answering calls or using earphones.
- There may be occasional audio and video synchronization issues.
- If you don’t use the device frequently, please make sure to charge it at least once a month to ensure better battery life.
- If your earphones remain connected to your device or if they are not charging when placed back in the charging case, please clean the connectors.
- Please ensure that the voltage of the charger you use for charging does not exceed 5V/1A to avoid damaging the product due to over voltage.
Note
- Keep the product dry and avoid placing it in a damp environment to prevent any impact on the internal circuits of the product.
- Do not expose the product to direct sunlight or high temperatures. High temperatures can shorten the lifespan of electronic components, damage the battery, and cause deformations in certain plastic parts.
- Avoid placing the product in extremely cold areas to prevent any damage to the internal circuit board.
- Do not attempt to dismantle the product. The product may be damaged if not taken apart by a professional.
- Avoid dropping, subjecting to strong vibrations, or hitting the product with hard objects to prevent any damage to the internal circuits.
- Do not use strong chemicals or cleaning agents to clean the earphones.
- Avoid using sharp objects to scratch the surface of the product, as this may damage the casing and affect its appearance.
WARNING Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other injury.
This equipment complies with the provisions of Directive 2012/19/EU. It is strictly forbidden to disposed of this equipment with general waste and must be recycled. This symbol indicates that this product cannot be used as regular domestic waste for disposal, and must be delivered to the corresponding waste recycling station that is capable of recycling electrical and electronic equipment.
Shenzhen Toocki Network Technology Co., Ltd.
Add: 308, 3rd Floor, Building Al, Xuexiangyuan, Yuanchuang Space,
Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
Manufacturer: Dongguan Huien Electronic Technology Co., LTD
Manufacturer Add: Room 301,Building of 1 ,No. 429, Changdong Road,Changping
Town, Dongguan City, Guangdong Province, China
Hotline: +86 0755-89399212
Website: www.toocki.com
TC0580Z/Made in China
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.